USART

40 %
60 %
Information about USART
Technology

Published on August 14, 2009

Author: ankitdaf

Source: slideshare.net

Receive.c /* Since we never know when we are going to get data, we write a Interrupt Routine that will execute on receiving data. You can write different conditions depending on your convenience to test whether data reception is complete and also whether it is accurate */ #include <avr/io.h> #include <avr/interrupt.h> #define USART_BAUDRATE 9600 #define BAUD_PRESCALE (((F_CPU / (USART_BAUDRATE * 16UL))) - 1) void initusart(void); // Set the baud rate ( communication speed in bits per second) int i=0; // Global variable acts as a counter unsigned char str[8]; // String to be sent, declared global if to be used in interrupts int main (void) { DDRA=0xff; // Initialise all ports DDRC=0xff; DDRB=0xff; DDRD=0X00; // Set PORTD for input, since it contains RX and TX pins PORTB=0x00; // Set all ports PORTC=0xff; PORTA=0x01; PORTD=0XFF; // Pull up PORTD initusart(); // Initialise USART while(1); // Infinite loop to keep the program running } ISR(USART_RXC_vect) { PORTC -= 0x01; // Decrement PORTC by one str[i]=UDR; // Load the character in the receive buffer to string variable if (str[6]=='g') { PORTC=0x00;} // Condition to test accuracy of last variable i++; // Increment counter to read next character } void initusart(void)

{ UCSRB |= (1 << RXEN); // Turn on the transmission and reception circuitry UCSRC |= (1 << URSEL) | (1 << UCSZ0) | (1 << UCSZ1); // Use 8-bit character sizes UBRRL = BAUD_PRESCALE; // Load lower 8-bits of the baud rate value into the low byte of the UBRR register UBRRH = (BAUD_PRESCALE >> 8); // Load upper 8-bits of the baud rate value into the high byte of the UBRR register UCSRB |= (1 << RXCIE); // Enable the USART Recieve Complete interrupt (USART_RXC) sei(); // Enable global interrupts, necessary if you want to use ANY interrupt }

Transmit.c /* The execution of the code below is such: After initialising USART, I call a send function to transmit the character. An interrupt is triggered on completion, the counter goes to the next character and calls the send function. So, the exectution will be in the form of continuous loops and will enter the main function only on completion of transmission of all characters */ #include <avr/io.h> #include <avr/interrupt.h> #define USART_BAUDRATE 9600 // Set the baud rate ( communication speed in bits per second) #define BAUD_PRESCALE (((F_CPU / (USART_BAUDRATE * 16UL))) - 1) // Prescale factor,calculated automatically void initusart(void); // Function for USART initialisation void send(void); // Function to send characters int i=0; // Global variable acts as a counter unsigned char str[8]="Testing"; // String to be sent, declared global if to be used in interrupts int main (void) { initusart(); // Initialise USART send(); // Call send function while(1); // Infinite loop to keep the program running } void send() { if (i<7) // Send the character only if i is less than string size { UDR=str[i]; // Loads the character into the transmit buffer } } ISR(USART_TXC_vect) // Interrupt Service Routine, fires on Transmit Complete (Tx C) { i++; // Increments i to send next character

UCSRA &= (0 << TXC); // Clears the Transmit complete flag, Do this to avoid errors send(); // Call the send function again } void initusart(void) { UCSRB |= (1 << TXEN); // Turn on the transmission and reception circuitry UCSRC |= (1 << URSEL) | (1 << UCSZ0) | (1 << UCSZ1); // Use 8-bit character sizes UBRRL = BAUD_PRESCALE; // Load lower 8-bits of the baud rate value into the low byte of the UBRR register UBRRH = (BAUD_PRESCALE >> 8); // Load upper 8-bits of the baud rate value into the high byte of the UBRR register UCSRB |= (1 << RXCIE); // Enable the USART Transmit Complete interrupt (USART_TXC) sei(); // Enable global interrupts, necessary if you want to use ANY interrupt }

Add a comment

Related presentations

Related pages

Universal Asynchronous Receiver Transmitter – Wikipedia

USART (Aussprache: ʊəˡsat oder 'ju sart) steht für Universal Synchronous/Asynchronous Receiver Transmitter und bietet zusätzlich die Möglichkeit ...
Read more

UART – Mikrocontroller.net

1 USART; 2 Reihenfolge der Bits; 3 Siehe auch; 4 Weblinks; USART . Neuere Mikrocontroller verfügen meist über einen oder zwei USART(s). USART steht für ...
Read more

U.S.Art | Worldwide Fine Art Handing Service

U.S.Art is the world’s largest fine art handling company, providing comprehensive, museum-quality art handling services around the globe.
Read more

Using the USART in Asynchronous Mode - Microchip Technology

USARTUSART Using the USART in Asynchronous Mode In this presentation we will examine the use of the USART in theAsynchronous Mode of operation. 2
Read more

Home [usart-classic.com]

Unser Interesse gilt seit über 5 Jahren der historischen amerikanischen Fahrzeugwelt, speziell Muscle-cars, Hot Rod's und Customfahrzeugen.
Read more

USART Programmierung auf dem STM32 | Hobby & Robotik

In diesem kleinen Tutorial will ich euch die USART-Schnittstelle des STM32 etwas näher bringen. Diese Schnittstelle funktioniert eigentlich auf den ...
Read more

Section 18. USART - Microchip Technology

1997 Microchip Technology Inc. DS31018A page 18-1 M USART 18 Section 18. USART HIGHLIGHTS This section of the manual contains the following major topics:
Read more