unit10 ch03

50 %
50 %
Information about unit10 ch03

Published on December 30, 2007

Author: Chloe

Source: authorstream.com

Chapter Overview :  Chapter Overview Bridging Switching Routing What Is a Bridge? :  What Is a Bridge? A data-link layer device that connects networks and filters packets Propagates only packets destined for the other side of the bridge Can reduce network traffic and collisions Can lessen delays Connecting LANs with a Bridge :  Connecting LANs with a Bridge Bridges and Collisions :  Bridges and Collisions A collision domain is a network (or part of a network) that is constructed so that a collision occurs when two computers transmit packets at precisely the same time. Adding a hub to a local area network (LAN) increases its size but maintains a single collision domain because hubs relay signals immediately at the physical layer, without filtering them. Hubs do not relay packets immediately; they wait until the entire packet is received. Because the bridge delays propagation, computers on opposite sides of the bridge transmitting at the same time do not cause a collision. Adding a bridge to a LAN splits it into two collision domains, resulting in fewer collisions and increased efficiency. Broadcasts :  Broadcasts Bridges and Broadcasts :  Bridges and Broadcasts Bridges propagate all broadcast packets without filtering them. The network segments on either side of a bridge are in the same broadcast domain. Transparent Bridging :  Transparent Bridging Transparent bridging is a method for automatically compiling a bridge’s address tables. Bridges maintain an address table for each network segment. Bridges read the source and destination addresses of packets and compare them to the tables to determine whether to propagate them. When a bridge lacks the information needed to filter a packet, it propagates the packet by default. Bridge Types :  Bridge Types Local bridge. Connects network segments of the same type and at the same location Translation bridge. Connects network segments at the same location that use different media or different protocols Remote bridge. Connects network segments at remote locations, using a wide area network (WAN) link Translation Bridge :  Translation Bridge Switch Characteristics :  Switch Characteristics Data-link layer device Replaces bridges and sometimes routers Similar in appearance to a hub Forwards incoming traffic out to the destination port only Converts a shared network medium to a dedicated one Offers advantages such as reduced network congestion and the use of full network bandwidth Can operate in full-duplex mode Switching :  Switching Replacing Routers with Switches :  Replacing Routers with Switches Virtual LANs :  Virtual LANs A virtual LAN (VLAN) is a subnet that exists inside a switch. Broadcasts sent by a computer go only to the other computers in the VLAN. Communications within a VLAN are switched. Communications between VLANs can be routed or switched. Layer 3 Switching :  Layer 3 Switching Layer 3 switching minimizes the amount of routing between VLANs because routing occurs only when absolutely necessary. A router establishes a connection between systems and then switches take over. Switch Types :  Switch Types A cut-through switch begins to forward packets immediately. A store-and-forward switch waits until the entire packet arrives before forwarding it. Router Characteristics :  Router Characteristics Connect networks together to form an internetwork Are network layer devices Can connect LANs running different data-link layer protocols Router Functions :  Router Functions Forward packets to the destination network Strip the data-link layer frames from incoming packets and repackage the data into new frames Fragment packets when necessary Routing Process Example :  Routing Process Example Hops :  Hops Routing Tables :  Routing Tables Routing tables are essential to the router operation and functions. There are two methods of creating routing tables: Static routing. Manual creation of routing table entries by an administrator Dynamic routing. Automatic creation of routing table entries by using a specialized routing protocol Router Types :  Router Types Routers can be stand-alone hardware devices or software running on a computer. Hardware routers. Range from expensive rack-mounted devices to small stand-alone units Software routers. Include Microsoft Windows 2000 Internet Connection Sharing (ICS), and Routing and Remote Access Chapter Summary :  Chapter Summary Bridging Bridges selectively relay packets between network segments, depending on their data-link layer destination addresses. Bridges maintain a single broadcast domain and create separate collision domains. Switching Switches improve on the function of bridges by forwarding packets only to their destination systems. Switches reduce the collisions on a network and increase the bandwidth available to each computer. Routing Routers are used to connect networks together at the network layer of the OSI reference model. Routers strip away the data-link layer frame of incoming packets and build a new frame using the data-link layer protocol of the outgoing network. Routing tables can be created manually by a network administrator or automatically by a routing protocol.

Add a comment

Related presentations

Related pages

UNIT 10 Respiratory Support - Cengage Learning - Education ...

After the airway has been opened and assessed for patency, the next step is to estab-lish adequate breathing. The EMT must determine if the rate and volume ...
Read more

Intro to SQL Unit10 FINAL - 1. Create a new Empty Database ...

View Exam Material - Intro to SQL Unit10 FINAL from IT 350 at Kaplan University. 1. Create a new Empty Database called “Final” For 4 – 7 Use the
Read more

Chapter 3, Amino Acids, Peptides, and Pr - John Wiley & Sons

4. Amino acids are linked together in proteins by _____ bonds. This peptide bond formation reaction results in the loss of a _____ molecule, which ...
Read more


Advertising Programmes Business Solutions +Google About Google Google.com © 2015 - Privacy - Terms. Search; Images; Maps; Play; YouTube; News; Gmail ...
Read more

CHAPTER 3 VECTORS - Cabrillo College - Breakthroughs ...

52 CHAPTER 3 VECTORS Scalars and Vectors Scalars, such as temperature, have mag-nitude only.They are specified by a number with a unit (10°C) and
Read more

DiBucci, Paul / AP Physics 1&2: Unit 1 - North Allegheny ...

AP Physics 1&2: Unit 10/11; AP Physics 1&2: Unit 12; AP Physics 1&2: Unit 13 ; ... ch03_reviewed.pdf 682.47 KB (Last Modified on May 9, 2014) Comments (-1)
Read more

Chatterbox Bingo III (6-10) - RVP

Chatterbox Bingo III. díl: Unit 10. In the crystal ball. It’s between the railway station and the café. Yes, they can see it. He must use his magic.
Read more