Published on July 24, 2014
It will continue to glow when the door closed for the first time
And when the gate is opened for the second time , the light will automatically be switched off
The working principle of the light switch is quite simple. The bistables inside CMOS 4013 are connected in series. FF2 is configured as a R-S memory to store the state of the switch. S1 must switch as soon as the door opens that is why it will be mounted on the door jamb. When the door will be opened FF2 is registered and its output (pin 13) will be 1. This output, connected at the tact entry of FF1 (pin 3) will open T1 and activate the relay switching ON the light. When the door is closed nothing will happen because FF2 is unregistered and its output (pin 13) passes in state “0″. Only when the door is opened again, FF1 will change its state and the output at pin 1 will block the transistor so the relay will be disconnected and the door light switch turns off the lamp. The relay must operate at voltages between 5 V and 15 V.
Automatic door light switchLIDS
Discrete element method modelling (DEM) has proven over many years to be a powerfu...
Segregation Testing to confirm packer isolation and well integrity. Monitor w...
A small presentation of History matching and a case study on it. Also on Gas mater...
This automatic door light switch circuit turns ON a lamp when a door is opened then turns it OFF when the door is opened again. The working principle of ...
Installed a automatic light switch for my kitchen pantry. Light comes on when door is opened and goes out when door is closed
Nice little unit from Cooper! I installed two of these switches to control coat closet and pantry lights. The switch is rated at 120 volts and 10 amps, so ...
Find great deals on eBay for automatic door light switch door lights switch. Shop with confidence.
The THOMAS & BETTS automatic door light switch installs quickly and easily on conventional hinge door jambs.
Product Features 125/250 VAC, 10 amp closet door light switch for automatic lighting solutions
automatic door light switch can be used as a project for UG engineering students.
The 10-Amp Push-Button Door Switch features normally on-momentary contact. ... single-throw circuitry automatically operates lights when door is opened.
Functional Devices CLC106 5A Automatic Closet Light ... but can be connected to a variety of switch types (door jam switches, magnetic switches ...
Auto On Off Light Switch RadioShack NPN Infrared Phototransistor 276-0145 MOSFET N-channel 276-2072. ... The Automatic Switch - Duration: 7:02.