The 5 main surfboard tails and what they do

33 %
67 %
Information about The 5 main surfboard tails and what they do

Published on December 19, 2015

Author: DisruptSports

Source: slideshare.net

1. The 5 Main Surfboard Tails and What They Do As surfboards have progressed the tail design has gotten a bit more complex as a number of variations have arose. You may have wondered why surfboards have different tails and what they do? Even with a wide spectrum of different shapes these are the main surfboard tails that you will come across. In this post you’ll gather a better understanding of the differences so you can choose the right tail on the right board. 1. Pin Tail • Pin tails have the narrowest width of all tails. • Have the most traction of any tails due to less surface area which results in the back of the board sinking more holding in. • Can be hard to manoeuvre and is not suited for small waves • Normally found on Guns where traction at high speed is more important than manuvability. 2. Swallow Tail • Gives the board more hold and traction • The upside down v in the tail gives control and bite in and out of the turns • The more surface area in the tail giving the ability to maintain speeds through fatter/softer sections of the wave • The wider and more pronounced swallow tail is often found on a fish (surfboard) and is suited to smaller waves.

2. 3. Round Tail • The round is similar shape to the pin but has been widened to a variations of widths but gives more surface area and bouncy • Does well in small was as it moves fast through the water • Versatile tail and does well in hollow waves and drawn out turns better than a square tail. 4. Squash Tail • Most common tail among short boards, it is a variation of the square tail • Its edgier tail allows for quick release in pivot turns. • Looser feel and very responsive • Designed for both control in steep waves as well as softer waves 5. Square Tail • Earliest tail design • Helps with stability when catching waves • Is good in the pivotal turns So there you have the 5 main surfboard tails and a little more information on how they differ. The tail of the surfboard is a good thing to consider when purchasing a new board, buyers should consider the type of wave they will be surfing, their skill level, and weight among other things.

Add a comment

Related pages

The 5 Main Surfboard Tails and What They Do

The 5 Main Surfboard Tails and What They Do. The 5 Main Surfboard Tails and What They Do. Upload Sign in Join. Books Audiobooks Comics Sheet Music. Scribd ...
Read more

The 5 Main Surfboard Tails and What They Do

The 5 Main Surfboard Tails and What They Do ... The 5 Main Surfboard Tails and What They Do As surfboards have progressed the tail design has ...
Read more

The 5 Main Surfboard Tails and What They DoDisrupt Surfing

Well in this post you’ll gather a better understanding of the differences of surfboard tails. You may wonder why surfboards have different tails?
Read more

THE HISTORY AND FUNCTIONALITY OF TAILS - SURFLINE.COM ...

Swallow was a used on more of a standard hotdog type board with a 5 ... do handshaping). When they ... up (they're all quads with squash tails) ...
Read more

Surfboard Tail Shapes - Surfing Waves | Info, Guides, Maps ...

Description of surfboard tail shapes and the waves they are ... One of the finest and most versatile tails I have ... Surfboard Tail Shapes; Surfboard ...
Read more

Surfboard fin - Wikipedia, the free encyclopedia

A surfboard fin or skeg is a hydrofoil mounted ... Both a skeg and "rail fins" stabilize the motion of the surfboard. They also ... The main drive in the ...
Read more

Types of Surfboard | Club Of The Waves

Information on the different types of surfboards, fins/skegs, tails, ... Types of surfboard ... They are generally between 5'2" and 6'4" long and between ...
Read more