advertisement

SURFACE ANALYSIS TECHNIQUES

50 %
50 %
advertisement
Information about SURFACE ANALYSIS TECHNIQUES
Education

Published on March 20, 2014

Author: khairolanuarmohammed

Source: slideshare.net

Description

WHO SHOULD ATTEND?
1. Technical Personnel and Decision-Makers are encouraged to participate in this training.
2. DECISION MAKERS: Technical Directors, Managers, Purchasers.
3. TECHNICAL PERSONNEL: Lecturers, Technical Sales, Marketing, Failure Analysis, Research & Development, Quality Control and Assurance, Production Engineers or Technicians.

INTRODUCTION

The characteristic of surface and near-surface regions of materials can be characterised by various surface analysis techniques. Applications of many engineering materials are determined by the surface and near-surface structures. Therefore, well-being of this region is essential in order to obtain a pre-required condition for those materials to be applied for a specific application. Typically, failure of engineering products may be traced back to surface/near-surface contamination or surface reconstruction. In order to obtain more information related to the failure, in-sight of these regions need to be exposed. This course is outlined to introduce basic principles of surface science, which serve as an essential foundation to explain the operation concepts and applications of several important surface analysis techniques. Know-how of interpreting the analysis data is also explained in this “easy-to-follow” and “easy-to-understand” training course. With these and the support of brief but sufficient theories of fundamental, skill of selecting a relevant technique with respect to its practical engineering usage will be covered. Ultimate goal for this course is to increase level of knowledge in making a correct technical decision to solve surface related issues and transform knowledge into applications.


COURSE OBJECTIVES

Upon completion of this course, participants will be able to:
i. List down common techniques used for surface analysis.
ii. Explain operation principles of those techniques.
iii. State advantages and limitations of a given technique.
iv. Systematically identify and justify useful analytical technique for problem solving.
advertisement

Date : 2, 3, & 4 April 2014 (Wednesday, Thursday & Friday) Time : 9.00 a.m. – 5.00 p.m. Venue : Sains @ USM, Persiaran Bukit Jambul, Universiti Sains Malaysia, Penang (Nearby Equatorial Hotel, Penang). PUSAT PENGAJIAN KEJURUTERAAN BAHAN & SUMBER MINERAL SCHOOL OF MATERIALS & MINERAL RESOURCES ENGINEERING More than 300 Engineers and Researchers have benefited from this course. HRDF CLAIMABLE* *Subject to HRDF Approval COURSE FEE (Covers training materials, refreshment including lunches and Certificate of Attendance) MYR2,990.00 per participant Group : MYR2,690.00 per participant (Minimum 3 participants from the same company / organisation) in collaboration with: WHO SHOULD ATTEND? ► Technicians, engineers, and researchers. ► Decision makers, policy makers, and managers. (wholly-owned by Universiti Sains Malaysia) (Co. No.: 473883-H)

INTRODUCTION The characteristic of surface and near-surface regions of materials can be characterised by various surface analysis techniques. Applications of many engineering materials are determined by the surface and near-surface structures. Therefore, well-being of this region is essential in order to obtain a pre-required condition for those materials to be applied for a specific application. Typically, failure of engineering products may be traced back to surface/near-surface contamination or surface reconstruction. In order to obtain more information related to the failure, in-sight of these regions need to be exposed. This course is outlined to introduce basic principles of surface science, which serve as an essential foundation to explain the operation concepts and applications of several important surface analysis techniques. Know-how of interpreting the analysis data is also explained in this “easy-to-follow” and “easy-to-understand” training course. With these and the support of brief but sufficient theories of fundamental, skill of selecting a relevant technique with respect to its practical engineering usage will be covered. Ultimate goal for this course is to increase level of knowledge in making a correct technical decision to solve surface related issues and transform knowledge into applications. COURSE OBJECTIVES Upon completion of this course, participants will be able to: i. List down common techniques used for surface analysis. ii. Explain operation principles of those techniques. iii. State advantages and limitations of a given technique. iv. Systematically identify and justify useful analytical technique for problem solving. BENEFITS TO PARTICIPANTS 1. Enhancement of technical knowledge. 2. Selection of appropriate analysis techniques for problem solving. 3. Improvement in decision-making process for analysis technique selection based on: 4. Technical justify concept. 5. Technical guidelines. 6. Reduction of wastage (time and money) by making a correct technical decision. Figure 1: General level of knowledge for user of analysis technique. COURSE METHODOLOGY This course is conducted in a seminar room. Each participant will receive a set of course materials. COURSE CO-ORDINATOR ASSOCIATE PROFESSOR DR. IR. CHEONG KUAN YEW Kuan Yew Cheong was born in Ipoh, Perak (1972) and received the B. Eng (1st Hons.) in Materials Engineering from Universiti Sains Malaysia (USM), Malaysia in 1997. After graduation, he worked for two years as a project engineer and quality assurance engineer in a project management company and a semiconductor-device manufacturing factory in Malaysia. End of 1999, he decided to pursue his postgraduate study (M.Sc.) after being awarded a Fellowship under the Academic Staff Training Scheme from USM. After completion his M.Sc. in Materials Engineering (Thin Film Technology) in 2001, he continued his Ph.D. in the School of Microelectronic Engineering, Griffith University, Australia and the degree was awarded in 2004. This study was fully sponsored by Australian Research Council, USM, and Griffith University Postgraduate Research Scholarship. In 2005, he was awarded a Certificate of Teaching and Learning from USM. Now he is serving as an Associate Professor at the School of Materials & Mineral Resources Engineering. He is teaching under- and post-graduate courses related to quality control and management, fabrication and characterization of engineering & electronic materials and devices for more than 9 years. Dr. Cheong’s main research area is on semiconductor device fabrication, electronic packaging, and characterization. Outcomes of his research have been published in more than 130 high impact-factor journals and 3 book chapters. Due to his expertise in wide-bandgap semiconductor- based device fabrication technology, for the past six years, he has been invited three times as a Visiting Scientist to Korea Electrotechnology Research Institute (KERI), Korea. He has also being invited as an Invited Speaker and Keynote Speaker in International Conference on Electronic Materials 2010 (ICEM 2010) - International Union of Materials Research Societies (IUMRS), Korea, CIE & IEM International Seminar on Electrical, Electronic and Energy Saving 2010, Taiwan, and Infineon Technologies (Kulim) Sdn Bhd (IFKM) Technical Symposium 2010, Malaysia, Surface Engineering 2011 at Bangkok, Thailand, and Collaborative Conference on Crystal Growth 2012 at Orlando, USA. Dr Cheong is serving as a reviewer for numerous referred journals and theses examiner both local and abroad. He has reviewed more than 450 manuscripts and now serving as an Advisory Editorial Board Member of Materials Science in Semiconductor Processing published by Elsevier Science B.V. and Associate Editor of Physics Express. He is also a Professional Engineers in Material Engineering disipline registered with the Board of Engineers, Malaysia. Honouring his excellent contribution in research, the Academy of Sciences Malaysia (ASM) has accoladed Dr Cheong with ‘Top Research Scientists Malaysia’ (TRSM) 2013. Outside university, he is very active in professional and community activities. He is a member of Materials Research Society (USA). He was the honorary treasurer for Electron Microscopy Society, Malaysia for year 2005/2006. Since 2005, he has been elected as one of the Ex- comms of the Institute of Electrical, Electronic Engineers (IEEE) – Component, Package, and Manufacturing Technology (CPMT) Society and Electron Device Society (EDS), Malaysia Chapter. In addition, he serves as the Chairman (2009 – 2011) and Advisor (2011 – 2012) of the Electronic Engineering Technical Division (eETD) under The Institution of Engineers Malaysia (IEM). He has been appointed as a Council Member of IEM from 2009 – 2012. For the past years, he has involved in organizing a number of local and international conferences and being invited to chair a few technical sessions in those conferences. Dr Cheong, who is a Certified PSMB Trainer, registered with the Ministry of Human Resource, Malaysia, has been delivering technical training courses for local and multinational industries for the past 5 years and more than 500 engineers and researchers have benefited from those courses.

Disclaimer The Organizer reserves the right to reschedule or cancel any part of its published programme or venue due to unforeseen circumstances and will not accept liability for costs incurred by participants or their organizations for the cancellation of travel arrangements and/or accommodation reservations as a result of the course being cancelled or postponed. Advance notice will be given if there is such a change or cancellation. PREVIOUS PARTICIPANTS • Vista Point Technologies Sdn. Bhd., Penang. • Possehl Electronics (Malaysia) Sdn. Bhd., Melaka. • Motorola Technology Sdn. Bhd., Penang. • Dynacraft Industries Sdn. Bhd., Penang. • KOBE Precision Technology Sdn. Bhd., Penang. • National Semiconductor Sdn. Bhd., Melaka. • Fuji Electric (Malaysia) Sdn. Bhd., Kedah. • Penang Seagate Industries (Malaysia) Sdn. Bhd., Penang. • OSRAM Opto Semiconductors (Malaysia) Sdn. Bhd., Penang. • Avago Technologies (Malaysia) Sdn. Bhd., Penang. • Globetronics Industries Sdn. Bhd., Penang. • Silterra (Malaysia) Sdn. Bhd., Kedah. • Advanced Micro Devices (AMD) Export Sdn. Bhd., Penang. • Hoya Electronics Malaysia Sdn. Bhd., Kedah. • Intel Products (M) Sdn. Bhd., Kedah. • Philips Lumileds Lighting Company Sdn. Bhd., Penang. • Becker Industrial Coatings (M) Sdn. Bhd., Selangor. • Malaysia Nuclear Agency, Selangor. • Knowles Electronics (M) Sdn. Bhd., Penang. • Motorola Solutions Sdn. Bhd., Penang. • Renesas Semiconductor (Malaysia) Sdn. Bhd., Penang. • B. Braun Medical Industries Sdn. Bhd., Penang. • Universiti Malaysia Pahang (UMP). • Universiti Teknologi Mara (UiTM). • Universiti Sains Malaysia (USM). • University College Sedaya International (UCSI). • Universiti Malaysia Sabah (UMS). • University Malaya (UM). • Universiti Tun Hussein Onn Malaysia (UTHM). • International Islamic University Malaysia (IIUM) • Universiti Teknologi PETRONAS (UTP). • Universiti Kebangsaan Malaysia (UKM). Technical Details: Associate Professor Dr. Ir. Cheong Kuan Yew School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia +604-653 3888 ext 5259 cheong@eng.usm.my Registration and others: Khairol Anuar Hazir Mohammed USAINS Holding Sdn. Bhd. +604-653 4372 / +6012-286 9048 khairol@usainsgroup.com / khairol_usains@yahoo.com / usains.holding@hotmail.com COURSE CONTENT SURFACE ANALYSIS TECHNIQUES DAY 1 1. Introduction 2. Fundamental of Surface Sciences 3. Logical Sequence of Practical Surface Analytical Problem Solving 4. Electron Beam Techniques: • Electron Microscopy (EM) • Energy Dispersive X-ray (EDX) • Auger Electron Spectroscopy (AES) • Electron Energy Loss Spectroscopy (EELS) DAY 2 5. Ion Beam Techniques: • Secondary Ion Mass Spectroscopy (SIMS) • Rutherford Backscattering Spectrometry (RBS) 6. X-Ray Techniques: • X-Ray Fluorescence (XRF) • X-Ray Photoelectron Spectroscopy (XPS) • X-ray Diffraction (XRD) DAY 3 7. Scanning Probe Microscopy: • Atomic Force Microscopy (AFM) 8. Optical Techniques: • Fourier Transform Infrared Spectroscopy (FTIR) 9. Comparison of Various Surface Analysis Techniques 10. Selection of Surface Analysis Techniques – A General Rule

SURFACE ANALYSIS TECHNIQUES APRIL 2014 Send registration form to : Khairol Anuar, USAINS Holding Sdn. Bhd., Ground Floor, Kompleks ЄUREKA, Universiti Sains Malaysia, 11800 USM PENANG. Fax : 04-657 2210 or Email to : khairol@usainsgroup.com / khairol_usains@yahoo.com / usains.holding@hotmail.com NO. PARTICIPANT NAME POSITION & EMAIL 1. 2. 3. 4. 5. Organisation Address: Postcode: Contact Person: Tel: Fax: E-mail: Mobile: MODE OF PAYMENT NUMBER BANK NO. OF PARTICIPANTS: MYR I enclosed Cheque Normal Bank Draft Money Order Group LO / PO TOTAL Cheque / Bank Draft / Money Order / LO / PO must be made payable to ‘USAINS HOLDING SDN. BHD.’. 1. Bank Transfer [Please fax your Bank-in Slip (Print your name & details on the slip)]. Payee Name : USAINS Holding Sdn. Bhd. Details : SURFACE ANALYSIS TECHNIQUES APRIL 2014 Name of Bank : CIMB Bank Berhad (USM Branch), Universiti Sains Malaysia, 11800 USM Penang. Account Number : 0709-0006708-05-7 2. A Local Order (LO) or Purchase Order (PO) must be presented before the event. The Organizer reserves the right to refrain a registered participant from taking part in the event if no proof of payment can be presented. This only applies to registered participants who have NOT paid the registration fee PRIOR to the event date. 3. Cancellation / Substitution A full refund less administration fee of MYR300.00 will be given for cancellation received not later than 10 working days before the Event. No refund will be made after this period. However, substitute participants are welcomed at no extra charge provided written notice of at least 5 working days before the event is given to the Organizer. REGISTRATION FORM

Add a comment

Related presentations

Related pages

Surface Analysis Techniques | Physical Electronics (PHI)

Physical Electronics, Inc. is the leading supplier of AES, TOF-SIMS, D-SIMS and XPS surface analysis instruments and equipment.
Read more

Surface Analysis: The Principal Techniques: Amazon.de ...

Surface Analysis: The Principal Techniques: Amazon.de: John C. Vickerman, Ian Gilmore: Fremdsprachige Bücher
Read more

Surface Analysis and Techniques in Biology Buch portofrei

Bücher bei Weltbild: Jetzt Surface Analysis and Techniques in Biology versandkostenfrei online kaufen bei Weltbild, Ihrem Bücher-Spezialisten!
Read more

Surface Analysis and Techniques in Biology: Amazon.de ...

Vincent S. - Surface Analysis and Techniques in Biology jetzt kaufen. ISBN: 9783319013596, Fremdsprachige Bücher - Molekularbiologie
Read more

Surface Analysis Laboratory Techniques - Intertek

Surface Analysis Laboratory Techniques. Surface analysis expertise and insight from our experts. Surface analysis expertise from world-class Intertek ...
Read more

Surface science - Wikipedia, the free encyclopedia

Surface science is the study of physical and chemical phenomena that occur at the interface of two phases, including solid–liquid interfaces, solid–gas ...
Read more

Surface Analysis and Techniques in Biology eBook by - Kobo

Lesen Sie Surface Analysis and Techniques in Biology von mit Kobo. This book summarizes the main surface analysis techniques that are being used to study ...
Read more

Surface Analysis The Principal Techniques

Surface Analysis The Principal Techniques 2nd Edition Editors JOHNC.VICKERMAN Manchester Interdisciplinary Biocentre, University of Manchester, UK IAN S ...
Read more

List of materials analysis methods - Wikipedia, the free ...

List of materials analysis methods: μSR - see Muon spin spectroscopy; χ - see ... BET - BET surface area measurement (BET from Brunauer, Emmett, Teller)
Read more

Surface Analysis - Buchhandel.de - Buch

Surface Analysis - The Principal Techniques - 2. Auflage - Buchhandel.de - Bücher lokal kaufen
Read more