Published on March 7, 2014
Computer Communication & Networking Practical # 05 Object: Introduction to Packet Tracer What is Packet Tracer? Packet Tracer is a protocol simulator developed by Dennis Frezzo and his team at Cisco Systems. Packet Tracer (PT) is a powerful and dynamic tool that displays the various protocols used in networking, in either Real Time or Simulation mode. This includes layer 2 protocols such as Ethernet and PPP, layer 3 protocols such as IP, ICMP, and ARP, and layer 4 protocols such as TCP and UDP. Routing protocols can also be traced. Introduction to the Packet Tracer Interface using a Hub Topology: Step 2: Choose “Hub” and then select “Generic” Step 3: After selecting “Generic” click on the main area. You will see a Hub. Step 1: Start Packet Tracer You will see the start screen as shown below. Step 4: Select “End Devices” and then click at “Generic” Choosing Devices and Connections We will begin building our network topology by selecting devices and the media in which to connect them. Several types of devices and network connections can be used. For this lab we will keep it simple by using End Devices, Switches, Hubs, and Connections. Sorath Asnani 11CS12 Step 5: Click at the workspace to see the PC. Repeat the above process to place as many PCs as you want. Page 1
Computer Communication & Networking Practical # 05 Step 8: Double click on a PC, a box will appear. Click on the “Desktop” tab. Step 6: Select “Connections” from Power Cycle Devices and click on “Automatically choose Connection Type” Step 9: Then select “IP configuration” Step 7: Draw connections from Hub to PCs Step 10: Write the IP address of your network and click at the Subnet mask filed. Subnet Mask will appear automatically. Sorath Asnani 11CS12 Page 2
Computer Communication & Networking Practical # 05 Step 11: Repeat Step 10 to set the IPs for all the PCs. Step 12: Select “Add simple message” Step 16: Observe the path of the Message from source to Hub, then to all devices. And then from Destination to Hub then back to the source. Step 13: Drag and Drop the message to the source device and then to the Destination device In this case my source device is PC1 and destination device is PC4. Step 14: Select the Simulation Mode at the bottom right corner Step 17: Finally observe the marks. If the source PC is marked correct it means you have successfully established the connection. Step 15: Click at “Auto Capture / Play” Conclusion: Connection established successfully between Source and Destination. Sorath Asnani 11CS12 Page 3
allestimento in cartone per il Cersaie 2014 alberi in cartone scultura in cartone
Quarta turma do workshop de Infografia, ministrado por Beatriz Blanco e Marcos Sin...
This document shows the detailed Steps to set up a simple network inside Packet Tracer. You will get familiarity with the software after following the Steps.
Download Packet Tracer; ... How to Configure Wireless Network Step by Step ... tasks follow this step by step guide of how to configure wireless network.
We are going to apply OSPF(open shortest path first) protocol on packet tracer. Let us take the following simple topology. Now, let us apply the ospf on it.
Packet Tracer 6.0 implements two methods for setting up a DHCP server in your network :
We will use Packet Tracer network simulator software for ... Set console line password to ... Configure cisco router step by step guide DOCX Format.
Packet Tracer Intro to Routing ... How to Set Up a Router ... Cisco Router Configuration + Servers ...
Packet Tracer labs ; Lab 1 : Basic switch setup ; ... Packet Tracer - Lab 1 : Basic switch setup ... before connecting it in your network environment.