מדפסת תלת מימד בטכנולוגיית SLS

75 %
25 %
Information about מדפסת תלת מימד בטכנולוגיית SLS
Design
sls

Published on March 15, 2014

Author: Caliber_Engineering

Source: slideshare.net

Description

מדפסת התלת מימד הטובה בעולם להדפסת חלקים מפולימרים עם תוכנות חומר סופיות -מיילון, ABS, פוליפרופילן, שעוות ועוד.
המדפסת המהירה בקטגוריה, בעלת מיחזור של 80% מהחומר!

ProX™ 500 SLS www.printin3d.com | NYSE: DDD

ProX 500 SLS 3D Printer • • SLS • • • • • • •

ProX 500 .1 –SLS – – – • • – •UV •(-40oC to 185oC)

ProX 500 2 – –

ProX 500 – – – – – –XYZ

ProX 500 - – • • • • • – • • – ––

ProX 500 •15 • • •

ProX 500 ProX 500 • •- • •

SLS3D Systems – • – •-Z •–

ProX 500 10 381 x 330 x 457 mm (15 x 13 x 18 in) Variable Speed Counter Rotating Roller 0.08 – 0.15 mm ProScan DX Digital High Speed Imaging – –

DuraForm ProX • • • • • •– •Class VI • •

Tensile Strength (MPa) Tensile Modulus (MPa) Flex Strength (MPa) Flex Modulus (MPa) Elongation at Break (%) 20 40 30 50 1500 2000250020 30 40 50 15002000 2500 20 40 60 DuraForm ProX PP + 20% Talc ABS Polypropylene

ProX 500 SLS

• – – – • – •High Ductile Plastic – –Tough

•– • • • • •Prox 500 • –ProX 500

3D Systems • ESD Vacuum • Bead Blaster • Dust Collector • Nitrogen Generator

•ProX 500 –208 VAC, 50/60 Hz, 3 ph, 10 kVa –90 PSI (6 BAR) Compressed Air –Nitrogen •Automatic Material Handling System –208-240 VAC, 1 ph –90 PSI (6 BAR) CDA (Clean,dry compressed air) –Nitrogen • Dust Collector – 208-240 VAC, 3 ph • Nitrogen Generator – 90 PSI (6 BAR) CDA (Clean,dry compressed air)

SLS ProX500 DuraFormProX

Top Designers Focus Almost Exclusively on SLS

Direct Manufacturing Lotus – Formula 1 success story The lotus F1 Team builds parts directly from digital data using CAD and SLS® technology.

21 Why do the top designers focus almost exclusively o SLS 21 Hi-Definition, smooth surfaces, consistent mechanical properties, no support structures, True freedom of creation/design for function Formula 1 Air Ducting

Custom Tooling • Coolant Nozzle – Conventional method – Round nozzle – Did not dissipate heat – Stressed finished parts – Direct Manufacturing – Conformal cooling – Evenly cools part – Less Scrap

Custom Tooling • Weld Fixture – Conventional Method – Aluminum Plates – Lead time of 3-4 weeks – $1,500 per fixture – Direct Manufacturing – Lead time 2-3 days – $300 per fixture

Cheetah Tool • Savings over $200,000 in tooling • Lead times dropped by months “If the 3D Systems’ technology wasn’t available, I would have needed a million more dollars and with all the intricate parts, it would not have been possible to complete the riveting tool,” Fulbright said.

• Over 200 brackets fabricated in one build. • Delivery of inspected and certified brackets in one week. Batch Manufacturing

Medical Devices - Zimmer • Patient Specific Devices • Conventional method – Manual cutting and drilling of bone Surgical expertise required – Improper alignment – Longer operating times – Large Inventory • Direct Manufacturing – Doctor preplans surgery – Matches patient exactly – Reduced Inventory – Reduced items for sterilization – Minimizes doctor to doctor variation – Reduced procedure time

Medical Bespoke Innovations success story Custom prosthetic devices

FHC Case Study Prints custom devices in 72 hours or less. www.fh-co.com Medical

Medical Shriners Hospital case study Direct production of medical device for cleft lip cases

Physical Mock-Up (PMU) Building the worlds fasted shoe using SLS – Case Study “The long-term aim of this research is to allow members of the public to have their own personalized footwear,” Hopkinson added. “Achieving success with elite athletes will prove to be the catalyst, allowing our processes to be applied to everyone.”

• Shown above: Defog ducts (part of Environmental Control System) • 32+ EX parts per aircraft Photo courtesy of Bell Direct Manufacturing - Aerospace Flight Ducts Enclosures, housings, and ducts benefit from the enhanced toughness • Shown above: Defog ducts (part of Environmental Control System) • 32+ EX parts per aircraft

"Using state-of-the-art laser sintering technology, ODM will produce complex parts more quickly and with fewer tools than traditional manufacturers. This will allow ODM to keep acquisition and operation costs low while providing just-in-time manufacturing services that more customers are demanding." Anil Shrikhande, vice president of Boeing Ventures Case Study – Boeing Air Ducts

Northrop - Grumman Rapid Tooling • 72 fastener locations • 92% cost reduction • 40% labor savings • 98% reduction in defects • $278,000 annual savings

www.3dsystems.com NYSE: DDD

Add a comment

Related presentations

My Music Magazine Pitch

My Music Magazine Pitch

October 30, 2014

music mag pitch

Questionaire charts

Questionaire charts

November 4, 2014

bk

Final research

Final research

November 5, 2014

final research

Cersaie 2014

Cersaie 2014

October 30, 2014

allestimento in cartone per il Cersaie 2014 alberi in cartone scultura in cartone

Quarta turma do workshop de Infografia, ministrado por Beatriz Blanco e Marcos Sin...

Related pages

הדפסה תלת-ממדית – ויקיפדיה

מדפסות תלת מימד מסוג ... sls - סינטור בעזרת לייזר ... מדפסת תלת-ממד אשר מאפשרת להדפיס רקמות ...
Read more

מדפסת תלת מימד SLS - caliber.co.il

... מדפסות תלת מימד ... חי באמצעות מדפסת תלת מימד! ... תלת מימד בטכנולוגיית sls ...
Read more

מדפסת תלת מימד SLS - Engineering - documents.tips

מדפסת תלת מימד sls ...
Read more

מדפסת תלת מימד ביתית שולחנית

מדפסת תלת מימד ... David SLS. David SLS. סורק ... MechScan עובד בטכנולוגיית מקרן אור לבן והודות ...
Read more

הדפסה תלת מימדית | דגמי הגליל

הדפסת תלת מימד בשיטת SLS. Selective Laser Sintering ... הדפסה בטכנולוגיית FDM (Fused Deposition Modeling) ...
Read more

מדפסת תלת-ממד – לא מה שחשבתם, לא מה שידעתם - New-Tech OnLine

... מוכנים להדפסה בכל מדפסת תלת ... מוצרים סופיים בטכנולוגיית ... תלת מימד ...
Read more

חשיפה ראשונה: ה-Lumen Tree של שירה קימל - פלטפורמה ליצירת ...

... זסלבסקי ה״אמא״ של הפלטפורמה הקהילתית האורבנית למיחזור והדפסות תלת מימד ...
Read more

טכנולוגיות | דגמי הגליל

בדגמי הגליל קיימות שלוש טכנולוגיות שונות של הדפסת תלת מימד: SLS ... בטכנולוגיית ... מדפסת ...
Read more