RAMEN Ball Sector Valve

33 %
67 %
Information about RAMEN Ball Sector Valve

Published on July 17, 2013

Author: anupshah76

Source: slideshare.net

Description

Rubber lined ball sector valves type KSG have been used since1975 in ore dressing plants for throttling control of pulp and abrasive water in connection with mills, thickeners, filters and magnet separators.

Ramén Type KSG Mounting flange for pneumatic or electric actuators (optional ISO bracket or adapter plate) 3-5 mm Rubber lined ball sector Outlet ring easily replacable Very favourable shape of the throttling orifice giving excellent control characteristic and resistance against abrasion (hatched area=flow area) Maintenance free O-ring seal Maintenance free bearing with sliding ring of Teflon of Rulon Short face to face dimension and low weight Low torque for operation Easily adapted to pneumatic or electric actuators for on-off or throttling service Rubber lined ball sector valves type KSG have been used since1975 in ore dressing plants for throttling control of pulp and abrasive water in connection with mills, thickeners, filters and magnet separators. in valve body reducing velocity Large flow area Rubber Lined Ball Sector Valve TB-KSG-E Ramén Trading AB Box 414, SE-191 24 Sollentuna www.ramen.se, info@ramen.se Tel: 08-594 77970, Fax: 08-96 88 97 070423 soft natural rubber Low maintenance costs - no lubrication Excellent control characteristic Features: The location of the shaft O-ring seal protects the shaft bearing from particles in the media ensuring long life time with small and retained torque for operation.

TB-KSG-E Construction Lockable hand lever with optional indicator scale showing 0-100% of max flow. Worm gear drive handwheel operator. Pneumatic cylinder for on-off or throttling service and with positioner. Electric actuator for on-off or throttling control. Installation The valve is flangeless and should be mounted between flanges according to ISO PN10 or ANSI 125lb (6" and 8" only). Because of the rubber lining no flange gaskets are required. Flow direction shall be with the throttling orifice on the outlet side of the valve as indicated in sectional drawing above. Thereby the lowest flow velocity is achieved and changing of flow directions in the valve is avoided. Eventual wear will occur only on the outlet ring and ball sector which are easily replaced if necessary. It is recommended that wetted parts of downstream pipe near the valve are rubber lined. To facilitate mounting of valve and pipes underneath a vessel, flanges may be mounted with rods on the valve body. Valve type is then read KSGF. The moving element of the valve is a sector of a ball with pivots journalled in the valve body. On 90-degree rotation it alters the throttling orifice from fully open to tight shut-off Valve body, ball sector and outlet ring are soft rubber lined on almost all wetted parts. The ball sector valve is primarily intended for throttling control but can also be used for Operation two position or on-off control. max. 40-600 C depending on temperature and velocityTemperature: Differential pressure: max. ca 3 bar, depending on temperature and media Working pressure: max 5 bar of Rulon, O-rings of nitril. with soft rubber, shaft and bearing sleeve of stainless steel, with bearing Body, ball sector and outlet ring of nodular iron with wetted parts linedMaterial: Dimensions: Capacity: Kvs-values from 95 to 1200 DN 80, 100, 125, 150, 200 An outlet ring is integrating the rubber seat that seals off the ball sector. The ball sector valve is not affected by dynamic forces in throttling position. It can be equipped with:

Add a comment

Related presentations

Related pages

Ramén Valves AB, manufacturer of Ramen Ball Sector Valve.

Presentation of Ramén Valves AB, manufacturer of Ramen Ball Sector Valve and supplier of Control Valves and Pressure regulators. Home of automation.
Read more

Ramen | Control - / Ball sector valves | Valves | Company

RAMEN Ball sector valve. Ramen ball sector valve is for control applications. Sizes DN 25 – 400. Body materials are AISI 316 and cast iron. Valves are ...
Read more

Ramén KS-1A - Ramén Valves

Ramén KS-1A Material Execution 1A – Soft seated Control Valve with hard chromed ball sector DN 25 - DN 300 The Ramén Ball Sector Control Valve in ...
Read more

Ramén Ball Sector Valve - Type KS-1 - Fluidcontrol Oy

PRODUCT DATA SHEET Ramén Ball Sector Valve - Type KS-1 Ramén Ball Sector Valve material execution 1 with carbon/ graphite reinforced PTFE seat ring.
Read more

Ramén Trading - Ball Sector Valves - Power Technology

Ramén manufactures the Ball Sector Valve in Sweden for throttling of liquids, gases, steam and slurries. The Ramén Ball Sector Valve has been installed ...
Read more

Documents - Ramén Valves AB, manufacturer of Ramen Ball ...

Ticona solves a tricky situation with ball sector valve The Rationale Behind Valve Characteristics – Valve Magazine Ramén Valves featured in Zambian ...
Read more

Ramén Ball Sector Valve Archive - Ramén Valves

It isn’t just Industrial Control Valves and Regulators – It’s the Know How!
Read more

Control Ball Valves | Bvalve

Control Ball Valves. Control Ball Valves. The Ramén Ball Sector Valve was launched in 1967 and since then many thousands of valves have been installed in:
Read more

Ramén Ball Sector Valve DN 300 - 3D animation - YouTube

3D animation of the Ramén Ball Sector Valve DN 300.
Read more