Published on January 16, 2009
Asterisk / DAHDI / Libpri ® QuickStart Installation Software Installation Installation Steps 1) If you are installing a digital card, download and install the latest version of libpri. Substitute the Digium® hardware requires drivers and libraries that are not integrated with the Linux kernel. Digium hardware is only version of libpri for the X.X in the command line below. libpri is available for download from: http://downloads.digium.com/pub/telephony/libpri supported under Linux. Digium recommends CentOS, Debian, RedHat, and Ubuntu distributions of Linux. # wget http://downloads.digium.com/pub/telephony/libpri/libpri-X.X-current.tar.gz Digium’s software, including drivers and application software, 2) Expand the downloaded file, compile its contents, and install the library. Substitute the version of may be obtained from Digium’s downloads server at: http://downloads.digium.com libpri for the X.X and X.X.X in the command lines below. For an introduction to Asterisk®, Digium’s telephony software, # tar -zxvf libpri-X.X-current.tar.gz including information on its configuration, setup and features, # cd libpri-X.X.X/ please refer to: http://www.asterisk.org # make # make install For information on setting up and configuring DAHDI drivers 3) Download the latest DAHDI drivers. DAHDI is available for download from: for your Digium hardware product, please refer to the product’s http://downloads.digium.com/pub/telephony/dahdi-linux-complete manual, available in the product-specific documentation section at: http://www.digium.com # wget http://downloads.digium.com/pub/telephony/dahdi-linux-complete-current.tar.gz To install your Digium® card, you will need: 4) Expand the downloaded file, compile its contents, and install the drivers and applications. Substitute the version of DAHDI for the X.X.X in the command lines below. • Linux 2.6 kernel headers # tar -zxvf dahdi-linux-complete-current.tar.gz • Development libraries and headers for ncurses # cd dahdi-linux-complete-X.X.X+X.X.X • Development libraries and headers for zlib and openssl # make • Development libraries and headers for libnewt # make install • GCC and standard software build tools 5) Download the latest version of Asterisk. Substitute the version of Asterisk for the X.X in the It is recommended that you use the most recent version of the command line below. Asterisk is available for download from: Asterisk, DAHDI, and libpri software for the best results. If you http://downloads.digium.com/pub/telephony/asterisk/ have previously installed any of these, Digium recommends that you upgrade to the latest “-current” version of each. # wget http://downloads.digium.com/pub/telephony/asterisk/asterisk-X.X-current.tar.gz 6) Expand the downloaded file, compile its contents, and install the application. Substitute the version of Asterisk for the X.X and X.X.X in the command lines below. THANKS FOR # tar -zxvf asterisk-X.X-current.tar.gz # cd asterisk-X.X.X # ./configure # make menuselect THE INSTALL!! # make # make install 7) If this is your first Asterisk install, you should install the sample configuration files. To do this run: # make samples Note that running this command will overwrite, after making a backup copy, any older Asterisk configuration files that you may have on your system www.digium.com Your installation of Asterisk, DAHDI, and libpri is now complete. www.asterisk.org If your installation has failed, please contact the reseller from whom you have purchased your Digium product, or e-mail Digium Technical Support via email@example.com. v1.3 - 14 OCT 08
Presentación que realice en el Evento Nacional de Gobierno Abierto, realizado los ...
In this presentation we will describe our experience developing with a highly dyna...
Presentation to the LITA Forum 7th November 2014 Albuquerque, NM
Un recorrido por los cambios que nos generará el wearabletech en el futuro
Um paralelo entre as novidades & mercado em Wearable Computing e Tecnologias Assis...
Want to understand the beneits Asterisk. Don’t forget to check Asterisk ® /DAHDI/Libpri QuickStart Installation Follow these simple steps to install ...
Software Installation Digium® hardware requires drivers and libraries that are not integrated with the Linux kernel. Digium hardware is only supported ...
Asterisk®/DAHDI/Libpri QuickStart Installation Follow these simple steps to install your Digium® card To install your Digium card, you will need:
Get the open source library, LIBPRI to communicate over ISDN Primary Rate Interfaces, T1, E1, and J1.
Asterisk Project … Home; Getting ... you'll need to Build and Install DAHDI. ... [root@server libpri-1.X.Y]# make install
Control legacy telephony interface cards with updated version of DAHDI, the Digium/Asterisk hardware device interface for the cards.
libpri 1.4.13 and later source code depends on DAHDI include files. So, one must install DAHDI before installing libpri.
Installing in this order ensures that any dependencies for DAHDI and Asterisk are installed prior to running the configuration scripts, which will ...
Installation Steps It is recommended that you use the most recent version of the Asterisk, DAHDI, and libpri software for the best results. If you have ...