Published on March 3, 2014
QIS college of engineering and Technology Production Analysis nd 2 –Mid mini project K. Chandra sekher 1st –M.B.A-13491E0037 2 14 k. Chandra sekher
A Study on Production Analysis Mini Project Report in Managerial Economics Submitted to JNTU, Kakinada In Partial Fulfilment for the Award of the Degree of MASTER OF BUSINESS ADMINISTRATION Submitted By Koppula. Chandra sekher (Reg. No. 13491E0037). DEPARTMENT OF MASTER OF BUSINESS ADMINISTRATION QIS COLLEGE OF ENGINEERING & TECHNOLOGY An ISO 9001: 2008 Certified Institution and Accredited by NBA (Affiliated to JNTU, Kakinada and Approved by AICTE) Vengamukkapalem, Pondur Road ONGOLE –523 272 . Jan-2014
INDEX S. No Contents Page No‟s 01 Abstract 03 02 Key wards 04 03 Introduction 05 04 Definition 05 05 Need for the study 05 06 Scope of the study 05 07 Methodology 05 08 Objectives 05 09 Review of literature 05 10 Production process & functions 06 11 Production with one variable &two variable 07,08 12 Iso quant‟s & Iso cost 09,10,11 13 List of combination o inputs 12 14 Cob Douglas production function 13 15 Law of return to scale 13,14,15 16 Economics and diseconomies scale 16,17,18,19 17 Conclusion 20 References
Production Analysis Abstract: Purpose – The purpose of the paper is to explore the potential of autopoiesis theory to open up new ways to understand knowledge production in business organizations. Design/methodology/approach – Initially essential theoretical information is presented, by reviewing the concept of knowledge-based competitive advantages in business organizations, and describing the notions of autopoiesis as a basis for the understanding of knowledge production in organizations, and micro-macro problem within the companies' structure and production. After that follows the main content of the paper, namely descriptions of processes influencing knowledge production in business organizations . Findings – Knowledge is embedded in social practices and a local setting and it is very much tacit in nature providing then a basis for creating a sustainable competitive advantage for business organizations. A business organization's memory and production are mutual media for one another in autopoietic recursive processes. Originality/value – Finding a viable perspective and approach with which business organizations can understand how their knowledge production takes place is an important issue. It is claimed in this paper that the idea of autopoiesis can potentially provide a new understanding for business organizations' knowledge production. Resource: Kaj U. Koskinen, (2013) "Business organizations' knowledge-production processes: an autopoietic approach", International Journal of Organizational Analysis, Vol. 21 Iss: 2, pp.137 – 153 10.1108/IJOA-05-2011-0490 (Permanent URL) Key words: Technology. I so-quant, I so cost, Land, Labour, Capital, Organization,
Introduction: Production is an important economic activity which satisfies the wants and needs of the people. Production function brings out the relationship between inputs used and the resulting output. A firm is an entity that combines and processes resources in order to produce output that will satisfy the consumer‟s needs. The firm has to decide as to how much to produce and how much input factors (labour and capital) to employ to produce efficiently. This chapter helps to understand the set of conditions for efficient production of an organization Production is an activity that transforms inputs into outputs (or) conversion of resource into commodities. “Production is the organized activity of transforming resources into finished products in the form of goods & services”. The features of production mainly are as follows. Both physical & mental activity is production. It must satisfy the other people‟s wants. Definition: According to samuelson,”the technical relationship which reveals the maximum amount of output capable of being produced by each and every set of inputs”. According to Michael R.Baye, “that function which defines the maximum amount of output that can be produced with a given set of inputs. From the above definitions, it can be seen that: The production function is more concerned with physical aspects of productions. It is the concerns of the engineer rather than that of the manager. To know how much be the production with a given set of inputs. Production function is defined at a given stage of technical knowledge. It means that if there is any technological breakthrough, there be further jump in the volume of production for the given set of inputs. Production function is an engineering relation that expresses the maximum amount of output that can be produced to within a given set of inputs. At any given time, the output from a given set of inputs is always fixed. Production function enables us to understand how best we can make use of technology to its greatest potential. Need for the Study: The competition is becoming truly global, with fragmented markets and customers expecting to get the best product at the best price with immediate availability. In this business environment we need to be agile to handle changes within the production system as well as changing the system to new circumstances. This paper is investigating the
concept of agility and how it can be applied within industry. A proposal on how to make an “agility” analysis from a production system perspective is presented and a case study has been performed to test this analysis in practice. Scope of the Study: Life Cycle Assessment (LCA) aims to analyze possible impact upon manufacturing process and availability of products, and also study the environmental considerations and potential influence during entire life cycle ranging from procurement, production and utilization to treatment (namely, from cradle to tomb). Based on high-density polyethylene (HDPE) pipe manufacturing of company A, this case study would involve evaluation of environmental influence during the production process. When the manufacturing process has been improved during “production process” and “forming cooling” stage, it is found that capital input on “electric power” and “water supply” could be reduced, thus helping to sharpen the competitive power of company A, and also ensure sustainable economic and industrial development in accordance with national policies on environmental protection. Objectives: To know production with one variable To Study cob-doglegs production function To Evaluate production with two-variables To know that law of returns to scale. Methodology: o This data collected from electronic sources collected from the electronic sources i.e., from the Google and the related websites and also Class subject materials. o http://www.emeraldinsight.com/journals.htm?articleid=1906651 o http://www.scsa.wa.edu.au/Senior_Secondary/Courses/WACE_Courses/Media_Produ ction_and_Analysis Review of literature: Production process Input-output relationship or production function Production function with one variable input and laws of returns COBB- DOUGLAS production function Least combination of input. ISO-costs Marginal rate of technical substitutes. ISO-quant‟s
Production process: INPUTS/ RESOURCES: LAND OUTPUT: LABOUR PRODUCT/ SERVICES CAPITAL ORGANIZATION TECHNOLOGY Input-output relationship or production function:The inputs for any product or service are land, labour, capital, organization & technology. Q = f(L1, L2, C, O, T) Q = quantity of production f = function is the type of relationship between inputs and outputs. L1= Land. L2= Labour. C= Capital. O= Organization. T= Technology. A manufacturer has to make a choice of the production function by considering his technical knowledge. He uses lower costs of inputs for a given level of production. Some factors of production may be important and the relative importance‟s of the factors depend upon the final product to be manufactured. Ex: In software industry, land is not an input factor as significant as that in case of an agricultural product. In the case of an agricultural product, increasing the other factors of production can increase the production, but beyond a point increased output can be had only with increased used agricultural land. Investment in land forms a significant portion of the total cost of production for output; where as in the case of the software industry, other factors such as technology, capital, management and others becomes significant. With change in industry and the requirements the production function also needs to be modified to suit to the situation.
Production function with one variable input and laws of returns:The law of return states that when at least one factor of production is fixed or factor input is fixed and when all other factors are varied, the total output in the initial stages will increase at an increasing rate, and after reaching certain level of output the total output will increase at declining rate. If variable factor inputs are added further to the fixed factor input, the total output, may decline. The law of returns is also called the law of variable proportions or the law of diminishing returns. Output with fixed capital and variable labour inputs: Units of labour Total product (TP) Marginal product( MP) Average product (AP) Stages 0 0 0 0 Stage I 1 10 10 10 2 22 12 11 3 33 11 11 4 40 7 10 5 45 5 9 6 48 3 8 7 48 0 6.85 8 45 -3 5.62 Stage II Stage III
Graph: B C TP A Stage -III Stage - II Output Stage - I AP Mp Units of labour (variable inputs) In the short-run, it is assumed that capital is a fixed factor input and labour is variable input. It is also assumed that technology is given and is not going to change. Under such circumstances, the firm starts production with a fixed amount of capital and uses more and more units of labour. In the initial stages, output increases at an increasing rate because capital is grossly under utilized. Productivity will increase up to point „A‟ where more and more units of labour are increased. After point „A‟ output increases at a declining rate till it reaches maximum at point „C‟. After point „C‟, the total output declines and the margined product of labour is negative. Thus indicates that the additional units of labour are not contributing anything positively to the total output. Even if labour is available free of cost, It is not worth using it. Production function with two variable inputs and law of returns:A production function requires two inputs, capital (C) & labour (L) to produce a given product (Q). This can be more than two inputs in a real life situation, but for a simple analysis, we restrict no. of inputs to two only. The production function based on two inputs can be expressed as, Q = f (C, 2) Normally, both capital and labour are required to produce a product. These two inputs can be substituted for each other. Hence the producer may choose any combination of labour and capital that gives the required no. of units of output. For any given level of output, a producer may hire both capital and labour, but he is free to choose any one combination of labour and capital out of several such combinations. The alternative combination of labour and capital yielding a given level of output are such that if the use of
one factor input is increased, that of another will decrease and vice versa. However, the units of an input foregone to get one unit of the other input changes, depends upon the degree of substitutability between the two input factors. Based on the techniques or technology used, the degree of substitutability may vary. ISOQUANTS Iso = equal Quant = quantity Isoquant = the quantities throughout a given Is quant are equal. Isoquants are also called „isoproduct curves‟. An Isoquant curve shows various combinations of two input factors such as capital and labour, which yield the same level of output. An Isoquant curve represents all such combinations which yield equal quantity of output; any or every combination is a good combination for manufacturer. Since he prefers all these combination equally, an Isoquant curve is also called „product indifference curve’. Combinations A B C D E F Capital (in lakh) 1 2 3 4 5 6 No.of Labourers 20 15 11 8 6 5 Graph: Isoquant yielding 20,000 units of production CAPITAL IQ 20,000 LABOUR From the above figure, it shows the different combinations of input factors to yield an output of 20,000 units of output. As the investment goes up, the no. of laborers can be reduced. The combination of „A‟ shows 1 unit of capital and 20 units of labour to produce say 20,000 units of output. All the above combinations if inputs can be plotted a graph, the locus of all the possible combinations of inputs shows up Isoquant.
Features of an Isoquant:Downward sloping: These are downward sloping because, if one input increases, the other one reduces. There is no question of increase in both the inputs to yield a given a given output. A degree of substitution is assumed between the factors of production. Convex to origin: Isoquants are convex to the origin. Because the input factors are not perfect substitutes. One input factor can be substituted by other input factor in a diminishing marginal rate. Do not intersect: These two Isoquants don‟t intersect, because each of these denote a particular level of output, if the manufacturer wants to operate at a higher level of output, he has to switch over to another Isoquant with a higher level of output & vice versa. Do not touch the axes: The Isoquant touches neither X-axis nor Y-axis, as both inputs are required to produce a given product. Graph: Isoquants where inputs factors are s perfect substitutes… Capital IQ3 = 40,000 units IQ2 = 30,000 units IQ1 = 20,000 units Labour Graph: Isoquants where inputs factors are not perfect substitutes…
IQ3 = 40,000 units IQ2 = 30,000 units Capital IQ1 =20,000 units labour Marginal rate of technical substitutes: - The marginal rate of technical substitution (MRTS) refers to the rate at which one input factor is substituted with the other to attain a given level of output. In other words, the lesser units of one input must be compensated by increasing amounts of another input to produce the same level of output. Formula: MRTS = = Change in Input / Change in Another output ∆K / ∆L The below table shows the ratio of MRTS between the two input factors, say capital and labour. 5 units of decrease in labour are compensated by an increase in 1 unit of capital, resulting in a MRTS of 5:1. Ratio of MRTS between capital and labour: Combinations Capital (Rs. In lakh) Labour MRTS A B C D E F 1 2 3 4 5 6 20 15 11 8 6 5 5:1 4;1 3:1 2:1 1:1 ISOCOSTS: It refers to that the cost curve that represents the combination of inputs that will cost the producer the same amount of money. In other words, each isocost denotes a particular level of total cost for a given level of production. If the level of production changes, the total cost changes and thus the isocost curve moves upwards and vice versa. The below figure shows three downward sloping straight line cost curves (assuming that the input prices are fixed, no quantity discounts are available) each costing Rs. 1.0 lakhs, Rs. 1.5 lakhs & Rs. 2.0 lakhs for the output levels of 20,000 , 30,000 and
40,000 units. (The total cost, as represented by each cost curve is calculated by multiplying the quantity of each input factor with its respective price). Isocosts farther from the origin, for given input costs, are associated with higher costs. Any change in input prices changes the slope of isocost lines. Graph: Capital 9 8 7 6 5 4 3 2 1 4 2 3 5 6 8 11 15 20 NO.OF labours LEAST COST COMBINATION OF INPUTS The manufacturer has to produce at lower costs to attain higher profits. The Iso costs and Iso quants can be used to determine the input usage that minimizes the cost of production. Where the slope of Iso quant is equal to that of iso cost, there lies the lowest point of cost of production. This can be observed by superimposing the iso costs on iso product curves. From the below figure, it is evident that the producer can with a total outlay of Rs. 1.5 lakh, reach the highest Isoquant curve which is IQ2, of he wants to reach IQ3, he has to bring additional resources, which is, let us assume, not possible he cant compromise with IQ!, as it means lower output. There is no other input combination on IQ2 other than point Q, which is cheaper than Rs. 1.5 lakh, so the obvious choice for the producer is Q combination of inputs only on IQ2. The points of tangency P, Q & R on each of the Isoquant curves represent the least cost combination of inputs, yielding maximum level of output any output lower or higher than this will result in higher cost of production. Graph: Least cost combination Expanction 20 30 40
COBB- DOUGLAS production function:Cobb & Douglas put forth a production function relating output in American manufacturing industries from 1899 to 1922 to labour & capital inputs. They used for the following formula: Formula: P=b Where, P is total output. L is the index of employment of labour in manufacturing. C is the index of fixed capital in manufacturing. The exponents „a‟ and „1-a‟ are the elasticities of production. These measure the percentage response of output to percentage charges in labour and capital respectively. The function estimated for the USA by Cobb & Douglas is P = 1.01 L^0.75 C^0.25. The production function shows that one percent change in labour input capital remaining the same is associated with a 0.75 percentage change in output. Similarly one percentage change in capital, labour remaining the same, is associated with a 0.25 percent change in output. RETURNS TO SCALE & RETURNS TO FACTORS Returns to scale refers to the returns enjoyed by the firm as a result of change in all the inputs. It explains the behaviour of the returns when the inputs are changed simultaneously. The returns to scale are governed by laws of returns to scale. Law of returns to scale: There are three laws of returns governing production function. 1. Law of increasing returns to scale. 2. Law of constant returns to scale. 3. Law of decreasing returns to scale. Law of increasing returns to scale: This law states that the volume of output keeps on increasing with every increase in the inputs. Where a given increase in inputs leads to a more than proportional increase in the output, the law of increasing returns to scales is said to operate. We can introduce division of labour and other technological means to increase production. Hence the total product increases at an increasing rate. Law of constant returns to scale: When the scope for division of labour gets restricted, the rate of increase in the total output remains constant, the law of constant returns to scale is said to operate. This law states that
the rate of increase/decrease in volume of output is same to that of rate of increase/decrease in inputs. Law of decreasing returns to scale: Where the proportionate increase in the inputs does not lead to equivalent increase in output, the output increases at a decreasing rate, the law of decreasing returns to scale is said to operate. This results in higher average cost per unit. These laws can be illustrated with an example of agricultural land. Take one acre land, if you fill the land well with adequate bags of fertilizers and sow good quality seed, the volume of output increases. The following table illustrates: Capital (in units) 1 2 4 Labour (in units) 3 6 % increase in Output both input (in units) 100 120 12 100 240 24 100 360 8 % increase Law of applicable. in output 140 Law of increasing returns to scale. 100 Law of constant returns to scale. 50 Law of decreasing returns to scale. From the above table, it is clear that with 1 unit of capital and 3 units of labour, the firm produces 50 units of output. When the inputs are doubled two units of capital and six units of labour, the output has gone up to 120 units. (From 50 units to 120 units). Thus when inputs are increased by 100 percent, the output has increased by 140% that is, output has increased by more than double. This governed by law of increasing returns to scale. When the inputs are further doubled that is to 4 units of capital and 12 units of labour the output has gone up to 240 units (from 120 units to 240 units). Thus when inputs are increased by 100%, the output has increased by 100%. That is output also has doubled. This is governed by law of constant returns to scale. when the inputs are further doubled, that is, to 8 units of capital and 24 units of labour, the output has gone up to 360 units. (From 240 units to 360 units). Thus when inputs are increased by 100%, which has increased only 50%. This is governed by law of decreasing returns to scale. RETURNS TO FACTORS: It is also called factor productivities. Productivity is the ratio of output to the input. Factor productivity refers to the short-run relationship of input and output. The productivity of one unit of a factor of production will be equal to the output it can generate.
Returns to factors refer to the output or return generated as a result of change in one or more factors, keeping the other factors unchanged. Given a percentage of increase or decrease in a particular factor such as labour, The change in productivity can be measured in terms of: Total productivity: The total output generated at varied levels of input of a particular factor (while other factors remain constant), it is called total physical product. Average productivity: The total physical product divided by the number units of that particular factor used yields average productivity. Marginal productivity: The marginal physical product is the additional output generated by adding an additional unit of the factor under study, keeping the other factors constant. The total physical product increases along with an increase in the inputs. However the rate of increase is varied, not constant. The total physical product at first increases at an increasing returns to scale, and later its rate of increasing declines because of the law of decreasing returns to scale. ECONOMIES AND DISECONOMIES OF SCALE: The economies of scale result because increase in the scale of production. Alfred marshal divided the economies of scale into 2 groups 1. Internal. 2. External. Internal economies: Internal economies refer to the economies in production costs which accrue to the firm alone when it expands its output. The internal economies occur as a result of increase in the scale of production. These are types of internal economies: 1. Marginal economies. 2. Commercial economies. 3. Financial economies. 4. Technical economies. 5. Marketing economies. 6. Risk-bearing economies. 7. Indivisibilities and automated machinery. 8. Economies of larger dimention. 9. Economies of research & research.
Marginal economies: An the firm expands, the firm needs qualified managerial personal to handle each of its functions; - marketing, finance, production, human resources and others in a professional way. Functional specialization ensures minimum wastage & lowers the cost of production in the long-run. Commercial economies: The transactions of buying and selling raw materials and other operating supplies such as spares and so on will be rapid and the volume of each transaction also grows as the firm grows. There could be cheaper savings in the procurement, transaction & storage costs. This will lead to lower costs and increased profits. Financial economies: There could be cheaper credit facilities from the financial institutions to meet the capital expenditure or working capital requirements. A larger firm has larger assets to give security to the financial institution which can consider reducing the rate of interest on the loans. Technical economies: Increase in the scale of production follows when there is sophisticated technology available and the firm is in a position to hire qualified technical man power to make use of there could be substantial savings in the hiring of man power due to larger investments in the technology. This lowers the cost per unit substantially. Marketing economies: As the firm grows larger and larger. It can afford to maintain a full fledged marketing department independently to handle the issues related to design of customer surveys, advertising materials, and promotion campaign handling of sales and marketing staff, renting of hoardings, launching a new product and so on. In the normal course, the firm spends large amounts on issues in marketing and is still not sure of the results because these are handled by different outride groups, on whom there is little control for the firm. Risk bearing economies: As there is growth in the size of the firm, there is increase in the risk also. Sharing the risk with the insurance companies is the risk priority for any firm. The firm can insure its machinery and other assets against the hazards of fire, theft & other risks, the large firms can spread their risk so that they do not keep all their eggs in one basket. They purchase raw material from different sources. Indivisibilities and automated machinery: -
To manufacture goods, a plant of certain maximum capacity is required whether the firm would like to produce and sell at the full capacity or not, because the production is lesser, the firm can‟t hire half the manager or half the telephone. The minimum quality can be produced in the firm. A firm producing below such minimum quantity will have to bear higher costs. Economies of larger dimention: Large scale production is required to take advantage of bigger size plant and equipment. For example, the cost of a 1,00,000 units capacity plant will not be double that of 50,000 units capacity plant like wise, the cost of a 10,000 tonnes oil tanker will not be double that of a 5,000 tonnes oil tanker. Economies of research & development: Large organizations such as Dr. Reddy‟s labs, Hindustan lever spend heavily on research and development and bring out several innovative products, only such firms with strong research & development base can cope with competition globally. EXTERNAL ECONOMIES These refer to all the firms in the industry because of growth of the industry as a whole or because of growth of auxillary industries. External economies benefit all the firms in the industry as the industry expands. This will lead to lowering the cost of production and thereby increasing the profitability. The external economies are grouped to 3 types. 1. Economies of concentration. 2. Economies of research and development. 3. Economies of welfare. Economies of concentration: All the firms are located one place. Than there is better infrastructure in terms of Approach roads. Transportation facilities such as railway lines. Banking & communication facilities. Availability of skilled labour. Economies of research and development: All the firms can pool resources together to finance research and development activities and thus share the benefits of research. There could be a common facility to share journals, news papers & other valuable reference material of common interest. Economies of welfare: There could be common facilities such as Canteen. Industrial housing.
Community halls. Schools and colleges. Hospitals. Those are commonly used by employees DISECONOMIES OF SCALE Diseconomies are mostly managerial in nature. Problems of planning, coordination communication and control may become increasingly complex as the firm grows in size resulting in increasing average cost per unit. Sometimes the firm may also collapse. Diseconomies of scale are said to result when an increase in the scale of production leads to a higher cost per unit. Ex:- All inputs an increase by 10%, but production increased by 5%, it is called diseconomies. As the firm grows layer, it may need to seek permission to operate in foreign markets. Any degree of bureaucratic inefficiency will affect the firm‟s profitability and this leads to diseconomies of scale. When a firm is not in a position to respond to the business environment in which operates diseconomies are bound to result in. modern organizations have started delaying their organizations to make them flat and lean to overcome the problems of diseconomies. Conclusion: Results from regression show that there were no states of misfit between the levels of both manufacturing practice sets/areas. This means that there are no significant differences in performance that may be tested for matching interaction. However, subgroup analysis provides greater detail on why there might not be any misfits (i.e. state of fit), by illustrating that when grouping by plant type (high/world class performer, HP, and standard performer, SP), the slight lack of significant difference in the correlation between MS and TM was in favour of HP. The implementation levels of MS-TM found were not significantly different, showing for HP slightly higher levels for both practices (+&+) than for SP, with slightly lower values in both cases (- & -). Therefore, it seems that both groups might perform equally well, due not to interaction but to the presence of a state of MS-TM fit alone. A state of fit such as this, known as selection or congruency, would be the reason for there being no significant matching interaction originally. Resource: http://www.emeraldinsight.com/journals.htm?articleid=17042302 http://www.pondiuni.edu.in/sites/default/files/Managerial%20Economics.pdf https://journals.hioa.no/index.php/pp/article/view/323
Production and political economic analysis of popular culture have several distinct dimensions. One dimension focuses on media ownership, stressing the ...
Production analysis model. Production Model Saari 2004 (Saari 2006,4) A model used here is a typical production analysis model by help of which it is ...
Search and apply for Production Analysis Jobs hiring now on CareerBuilder.
Meaning of production Production refers to the transformation of inputs or resources into outputs or goods and services. - production is a process in which ...
In economics, a production function relates physical output of a production process to physical inputs or factors of production. The production function is ...
Production Analysis Report. In the manufacturing unit, production is heart of company. As personally filled that company owners pleased to listened noise ...
The Production Rules Configurator is a software tool that can be tailored to the specific needs of each individual user in their production environment.