Published on March 3, 2014
Preparation for Installing Hardware Ajay Jassi
Before Installation • It’s important for safety procedures, to be followed as it prevents risks and danger to the user and the system. • Equipment such as an antistatic mat and wristband will simply prevent electrostatic charges between the components and the engineer. • The metal crocodile clip will be used, as the metal is a electrical conductor which enables the two parts to react.
On a flat surface, roll and lay down an antistatic mat
Connect the antistatic wristband to the antistatic mat, using the clip.
Connect a crocodile clip to the end of the wire, so it can be connected to the pc
Unplug the pc, so it is ready to open up
Power cycle the pc, to get rid of an current electricity
Lay the pc flat on the antistatic mat and open the tower up
Put on the antistatic wristband and attach the crocodile clip inside the pc
Alternately if the antistatic wristband isn’t included with the wire, as separate wristband can be used, which is plugged into the mains.
1. Preparation for Installing Hardware Ajay Jassi. 2. Before Installation • It’s important for safety procedures, to be followed as it prevents risks ...
Unit 7: Installing Computer Hardware Unit code: T/601/3261 QCF Level 2: BTEC First Credit value: 10 ... Preparation for installing and testing hardware:
Cisco Nexus 7710 Switch Site Preparation and Hardware Installation Guide . ... Installing the Chassis; ... Site Preparation and Maintenance Records; Index;
Cisco Nexus 7710 Switch Site Preparation and Hardware Installation Guide -Installing the Chassis
Prerequisites and Preparation for Installation. 5.1. ... Before installing the Red Hat ... it must meet these requirements for software and hardware ...
Installing the Windows 2000 Remote ... your server and client hardware meet the remote installation hardware ... Installation Preparation ...
Before you install SnapManager for Exchange, you might need to configure Windows host systems, hardware, and software components; back up your databases ...
New Installations and Replacements. Installing hardware on a new door is usually uncomplicated, though the type of hardware and level of preparation needed ...
Pre-Installation Steps for Installing Windows ... Windows Server 2008 on enterprise class servers and hardware such as initial preparation, ...