Plumbing Solutions for Overflowing Toilet

50 %
50 %
Information about Plumbing Solutions for Overflowing Toilet
Others-Misc

Published on January 12, 2019

Author: QAPlumbing

Source: authorstream.com

slide 1: Plumbing Solutions for Overfowing Toilet One thing that you would never want to come across in your daily life is improper flushing of your toilet when you use it. But things just don’t go that way always and there could be instances where clogging of toilet do occur worse still it overflows. The best thing that you want to see is to stop raw sewage from overflowing onto the bathroom floor however this is possible only if you have the knowledge of what should be done and have the necessary tools with you. If you want to prepare yourself for the worst this do-it-yourself can come quite handy. Your First step Irrespective of the cause of overflow in a toilet the urgent thing that you want is to prevent water from flowing into the bowl. This could be achieved in many bathrooms with the main shutoff valve of the toilet. You could find a hand-crank valve somewhere along the water line that comes from the wall to the toilet. If this valve is not there then it is likely present behind the wall or beneath the floor tiles which slide 2: makes it necessary to look for Plumbing solutions Mandurah to do necessary changes for making the valve accessible. Stopping the toilet valve is the safest way to completely stop overflowing of water in the toilet. With a closed valve you stop possible filling of the bowl that would give you enough time for clearing the clog. However moving the valve could turn out to be quite a hassle when it really matters. This is because as the valve usually remains open for years it could get sticky or even rust when it is present in the open air for long. To get over this condition turn the toilet valve back and forth a few times. If it refuses to budge use a little lubricant till it starts moving freely. Make a habit of closing and reopening the valve whenever you plan to clean the bathroom. This action will take few seconds but in the long run it will help you close the toilet valve soon in an emergency. Your Next Move If the first step of closing the toilet valve fails your next step would be to fix the problem inside the toilet tank. To go about it remove the lid carefully and keep it aside. The next step is to check the flapper which is a rubber disc present at the bottom of the tank to cover the hole there. If the flapper is found to be open close it with your hand. This should be enough to prevent the flow of water. If the flapper is found to be not open or if it fails to close manually look for the float ball. This ball floats on the water surface and prevents water from filling at a specific level. To stop the water from overflowing simply raise the float ball manually to the top of the tank. This could turn out to be quite a precarious situation if you are the only person at home. If water flows into the bowl on lowering the float ball then you need to hold the ball in its place and work on the shutoff valve with the other hand. If this step fails and you are unable to stop overflowing it is high time that you contact reliable plumbing solutions in Mandurah. The Final Step Once you have stopped the overflowing it is time to free the clog. Take a toilet plunger and clear the clog. If there is no plunger with you it is important that you get one today. You don’t know when your toilet is going to overflow. And if you are still unable to clear the clog or to deal with other plumbing needs the best thing that you should do is to contact a licensed plumber for your bathroom plumbing in Mandurah. slide 3: QA Plumbing 8 Rafferty Rd Mandurah WA 6210 Australia P.O. Box 2030 Phone: 0895828822   FAX: 0895355216 E­mail: adminqaplumbing.com.au Website: www.qaplumbing.com.au

Add a comment

Related presentations