Open-E DSS V7 Asynchronous Data Replication over a LAN

50 %
50 %
Information about Open-E DSS V7 Asynchronous Data Replication over a LAN
Business & Mgmt

Published on February 17, 2014

Author: open-e

Source: slideshare.net

Description

Open-E DSS V7 Asynchronous Data Replication over a LAN. For more information go to: http://www.open-e.com

Step-by-Step Guide to Open-E DSS V7 Asynchronous Data (File) Replication over a LAN Software Version: DSS ver. 7.00 up11 Presentation updated: July 2013 www.open-e.com 1

Setting up Data (File) Replication over a LAN TO SET UP DATA (FILE) REPLICATION, PERFORM THE FOLLOWING STEPS: 1. Configure hardware 2. Configure the destination node 3. Configure the source node 4. Configure replication schedule 5. Check the status of Data (File) Replication www.open-e.com 2

Setting up Data (File) Replication over a LAN 1. Configure hardware Hardware Requirements To run the Data (File) Replication on Open-E DSS V7 over LAN, a minimum of two systems are required. Logical volumes working on the source node must have snapshots created and enabled. Both servers are working in the Local Area Network. An example configuration is shown below: Data Server (DSS1) Data Server (DSS2) Source node Destination node IP Address: 192.168.0.220 IP Address: 192.168.0.221 RAID System 2 RAID System 1 Volume Groups (vg00) Volume Groups (vg00) Snapshot NAS volume (lv0000) NAS volume (lv0000) Shares: Data Shares: Copy of Data Data (File) Replication www.open-e.com 3

Setting up Data (File) Replication over a LAN Data Server (DSS2) Destination node 2. Configure the destination node IP Address: 192.168.0.221 In the "CONFIGURATION" menu, select "Volume manager" and "Volume groups". Volume Groups (vg00) Add the selected physical units (Unit MD0) to create a new volume group (in this case, vg00) and click apply. www.open-e.com 4

Setting up Data (File) Replication over a LAN Data Server (DSS2) Destination node 2. Configure the destination node IP Address: 192.168.0.221 Volume Groups (vg00) NAS volume (lv0000) Select the appropriate volume group (vg00) from the list on the left and create a new NAS volume of the required size. This logical volume will be the destination of the replication process. After assigning an appropriate amount of space for the NAS volume, click the apply button. www.open-e.com 5

Setting up Data (File) Replication over a LAN Data Server (DSS2) Destination node 2. Configure the destination node IP Address: 192.168.0.221 Volume Groups (vg00) The destination NAS Volume is now configured. NAS volume (lv0000) www.open-e.com 6

Setting up Data (File) Replication over a LAN Data Server (DSS2) Destination node 2. Configure the destination node IP Address: 192.168.0.221 Under the "CONFIGURATION" tab, select the "NAS settings" menu. Data (File) Replication In the Data (file) replication agent function, check the Enable data (file) replication agent box, and click the apply button. www.open-e.com 7

Setting up Data (File) Replication over a LAN Data Server (DSS2) Destination node 2. Configure the destination node IP Address: 192.168.0.221 Under the "CONFIGURATION" menu, select "NAS resources" and "Shares". Shares: Copy of Data A tree listing of NAS shared volumes (Shares) will appear on the left side of the DSS console. In the example, a shared volume named Copy of Data on lv0000 has been created. www.open-e.com 8

Setting up Data (File) Replication over a LAN Data Server (DSS2) Destination node 2. Configure the destination node IP Address: 192.168.0.221 After creating the new shared volume, click on the share name, check the box Use data (file) replication within Data (file) replication agent settings function and click on the apply button. Data (File) Replication NOTE: It is strongly recommended to protect the replication protocol with a username and password, along with a list of allowed IP addresses. This will prevent other data (file) replication tasks from accessing this share. The configuration of the Destination Node (storage server) is now complete. www.open-e.com 9

Setting up Data (File) Replication over a LAN Data Server (DSS1) Source node 3. Configure the source node IP Address: 192.168.0.220 In the "CONFIGURATION" menu, select "Volume manager" and "Volume groups". Volume Groups (vg00) Add the selected physical units (Unit S001) to create a new volume group (in this case, vg00) and click apply. www.open-e.com 10

Setting up Data (File) Replication over a LAN Data Server (DSS1) Source node 3. Configure the source node IP Address: 192.168.0.220 Volume Groups (vg00) NAS volume (lv0000) Select the appropriate volume group (vg00) from the list on the left and create a new NAS volume of the required size. This logical volume will be the source of the replication process. After assigning an appropriate amount of space for the NAS volume, click the apply button. www.open-e.com 11

Setting up Data (File) Replication over a LAN Data Server (DSS1) Source node 3. Configure the source node IP Address: 192.168.0.220 Snapshot To run the replication process, you must first define a new snapshot to be taken of the volume to be replicated. The snapshot size should be large enough to accommodate the changes you anticipate, 10% to 15% of the logical volume is sometimes recommended. Next, select "Assign to volume lv0000". After assigning an appropriate amount of space for the snapshot, click the apply button. www.open-e.com 12

Setting up Data (File) Replication over a LAN Data Server (DSS1) Source node 3. Configure the source node IP Address: 192.168.0.220 NAS volume (lv0000) Snapshot The snapshot is now created, and has been assigned to the logical volume lv0000. www.open-e.com 13

Setting up Data (File) Replication over a LAN Data Server (DSS1) Source node 3. Configure the source node IP Address: 192.168.0.220 In the "CONFIGURATION" menu, select "NAS settings". Data (File) Replication Check the Enable data (file) replication agent box, and click the apply button. www.open-e.com 14

Setting up Data (File) Replication over a LAN Data Server (DSS1) Source node 3. Configure the source node IP Address: 192.168.0.220 In the "CONFIGURATION" menu, select "NAS resources" and "Shares". Shares: Data To create a share, enter the share name in the field Name. In this example a new share named Data has been created. www.open-e.com 15

Setting up Data (File) Replication over a LAN Data Server (DSS1) Source node 3. Configure the source node IP Address: 192.168.0.220 After the share to be replicated has been configured, go to the "MAINTENANCE" menu and select "Data (file) replication". Data (File) Replication www.open-e.com 16

Setting up Data (File) Replication over a LAN Data Server (DSS1) Source node 3. Configure the source node IP Address: 192.168.0.220 Select the source share to be replicated. Under Create new Data (File) Replication task function, enter a name for the task and select the Source share to be replicated. At this point, a snapshot (snap00000) of the source share will automatically be assigned. In the Destination IP field, enter the IP address of the destination server (in this example, 192.168.0.221) and the username/password (if applicable) for the destination. Next, configure the Destination share field by clicking on the button. In this example, the Copy of Data share will appear. Next, click on the apply button. www.open-e.com 17

Setting up Data (File) Replication over a LAN Data Server (DSS1) Source node 3. Configure the source node IP Address: 192.168.0.220 After Open-E DSS V7 Web console, has been reloaded, the new task (ReplicationTask) should appear. An additional information about the selected replication task is visible in the Data (file) replication task window. The configuration of the source node (storage server) is now complete. www.open-e.com 18

Setting up Data (File) Replication over a LAN Data Server (DSS1) Source node 4. Configure replication schedule IP Address: 192.168.0.220 Using the Create schedule for data (file) Replication task function, set the desired replication schedules or explicitly start, stop and delete data (file) replication tasks, as desired. www.open-e.com 19

Setting up Data (File) Replication over a LAN Data Server (DSS1) Source node 5. Check the status of Data (File) Replication IP Address: 192.168.0.220 In Data (file) replication tasks function set the desired Data (File) Replication to start, stop and delete tasks. Click on the button with the task name (in this case ReplicationTask) to display detailed information on the current replication task (the replication task running at 7p.m.). www.open-e.com 20

Setting up Data (File) Replication over a LAN Data Server (DSS1) Source node 5. Check the status of Data (File) Replication IP Address: 192.168.0.220 To obtain detailed information about the progress of Data (File) Replication tasks, under the "STATUS" menu, select "Tasks". Then, click Data (File) Replication tasks and select the task. www.open-e.com 21

Setting up Data (File) Replication over a LAN Data Servers (DSS1 and DSS2) Source and Destination node 5. Check the status of Data (File) Replication IP Address: 192.168.0.220 and 192.168.0.221 Share: Data Once Data (File) Replication task is completed, all data from the "Data" share will be available on the "Copy of data" share. Share: Copy of Data The configuration of the source and destination nodes for asynchronous Data (File) Replication is now complete. www.open-e.com 22

Thank you! Follow Open-E: www.open-e.com 23

Add a comment

Related presentations

Related pages

Step-by-Step Guide to Open-E DSS V7 Asynchronous Data ...

www.open-e.com 1 Step-by-Step Guide to Open-E DSS V7 Asynchronous Data (File) Replication over a LAN Software Version: DSS ver. 7.00 up11 Presentation ...
Read more

Data and storage replication software solution with Open-E ...

... data replication over WAN and LAN with Open-E data ... Open-E DSS V7 Support ... Open-E Data Replication enables asynchronous file and ...
Read more

Open-E DSS V6 Asynchronous Data Replication Over a LAN

Open-E DSS V6 Asynchronous Data Replication Over a LAN - Free download as PDF File (.pdf), Text File (.txt) or view presentation slides online. A ...
Read more

Open-E DSS v7 mit 4 / 8 / 16 x SAS/SATA im 1 / 2 / 3 HE ...

... Angebot Open-E DSS v7 Storage Software ... Asynchronous Volume Replication über LAN: Asynchronous Volume Replication ... Data Replication over LAN :
Read more

Angebot Open-E DSS v7 Lizenz / Stor IT Back

Asynchronous Volume Replication über LAN: Asynchronous Volume Replication ... Data Replication over LAN : ... Open-E DSS v7 active/active iSCSI ...
Read more

initial volume replication - over wan - forum.open-e.com

... (to set up volume replication) ... Open-E Data Storage Server; DSS - Data Storage Server; initial volume replication - over wan ...
Read more

Slow connections | Open-E Blog

While you are using WAN network you may face the problem of slow connections. ... Asynchronous data replication over a WAN ... Open-E DSS V7 Data ...
Read more