New PowerBridge Cable Management & Power Extenders

50 %
50 %
Information about New PowerBridge Cable Management & Power Extenders
How-to & DIY

Published on March 1, 2014

Author: DavidWard12

Source: slideshare.net

Description

DIY Recessed Power Outlet and Cable Management products. Check out their complete line up here: http://www.wiredathome.com/brands/PowerBridge.html

In-Wall Power Cable Management for HDTV www.PowerBridge1.com jpistol@powerbridgesolution.com 303.683.2434 x300

WHITE PAPER: Installation Compliance GENERAL: Conform to US Standards UL498, UL 514C, UL817 and Canadian CSA Standard C22.2 NOs 21, 42.1 INTENDED USE: PowerBridge Solution is certified for installation to provide a single location in-wall/ceiling power extension using code compliant building power cable within enclosed walls or ceiling areas. Installation conforms to NEC Chapter 3 Wiring Methods. Performs extension of 120-volt A.C. power from an existing power source, such as, not limited to; an existing installed outlet receptacle or external UL Listed power bar or extension surge protection device through external use of a UL Listed power supply cable. ------BUILDING POWER CABLE: Nonmetallic-sheathed cable, also known as *ROMEX®, UL Listed NM-type cable is the most common and most accepted building premise power cable used for 120-volt wiring of lights, outlets and switches. Supplied 14-2 gauge NM-type building cable can be utilized in all areas of the US and Canada where NM-type cable is approved to meet code compliancy. EXCEPTION: Cook County, IL – NYC, NY INSTALLATION PREMISE: Installation of the PowerBridge creates a dead-front extension, meaning it is not wired to the live premise branch- circuit power. PowerBridge remains as a dead-front, defined as without live parts until it is energized by means from the dead-front inlet through a suitable UL Listed power supply cord from the front of the existing power circuit, through its rated receptacle outlet. Benefit to this method of installation allows connection to an external power conditioner/surge protection device, bridging protected power in-wall to wall mounted display and audio appliances. ------· PowerBridge is not installed as part of the building premise power circuit. · PowerBridge is not wired to, or made permanently part of, the building electrical circuit or branch-circuit. · Installation does not create a new circuit, also known as a branch-circuit or branch-circuit extension. · Installation does not change, modify, alter, or add-to, the premise power circuit as it is not direct wired to the premise power circuit. POWERCONNECTOR NM-TYPE POWER CABLE CONNECTORS: BENEFITS: PowerBridge innovated use of pre-terminated NM Connectors for plug-together connection of supplied preterminated NM-type building power cable. No tools required. Installer friendly, no special training or skill required to connect. Safely and correctly allows fast plug-to-plug connection between the pre-terminated PowerIN and PowerOUT wall plates without hard wiring to termination screw attachment points. Ensures integrity of NM Cable connection, using secure locked termination points.

INSTALLATION CODE APPROVALS: Conforms for use within National Electrical Code (NEC) Approval for PowerConnectors: *NEC Article 334.40 (B) Devices of Insulating Material. “- tap devices of insulating material shall be permitted to be used without boxes in exposed cable wiring for rewiring in existing buildings where the cable is concealed and fished. Openings in such devices shall form a close fit around the outer covering of the cable and the device shall fully enclose the part of the cable from which any part of the covering has been removed.” Approval for installation of NM cable within walls: *NEC Article 334.30 (B) Unsupported Cables. “Nonmetallic-sheathed cable shall be permitted to be unsupported where the cable is fished between access points through concealed spaces in finished buildings or structures and supporting is impracticable.” Approval for installation of assembled Listed kit: *NEC Article 400.7 (A) (11) Flexible Cords and Cables - Uses Permitted “Between an existing receptacle outlet and an inlet, where the inlet provides power to an additional receptacle outlet. The wiring interconnecting the inlet to the receptacle outlet shall be a Chapter 3 wiring method. The inlet, receptacle outlet, and Chapter 3 wiring method, including the flexible cord and fittings, shall be a listed assembly specific for this application.” Applicable products manufactured by HD Products for: PowerBridge: ONE-CK, TWO-CK, SBCK, SWCK, CKRE, ONE-PRO, TWO-PRO, SWPR, SBPR HD Products, LLC. PowerBridge Solution. 3869 Norwood Dr. #5 Littleton, CO 80125 | 303.683.2434 x300 info@powerbridgesolution.com | www.PowerBridgeSolution.com © 2013 HD Products, Inc., PowerBridge Solution *ROMEX® is Trademark of the Southwire Company. *© NEC® National Electrical Code® Trademarks of the NFPA

In-Wall Recessed Power Cable Management - PowerConnect MODEL ONE-CK Conceal cables and power for your wall mounted TV Introducing the all new ONE-CK in-wall power and cable management system. Single-gang size all-in-one design. Designed to simplify wiring behind wall-mounted flat-panel TV’s This discreet system allows low voltage cables and wires to be Power Extension In-Wall routed through the wall for a clean look. AV Cables In-Wall Code Compliant to install power, includes hardware and helpful mounting template make the ONE-CK the perfect do-it-yourself solution for any skill level, without the need for an electrician. No wiring, simple snap together PowerConnectors make this safe and easy. CK - ConnectorKit Series ONE-CK, TWO-CK So simple... You can do this! Pre-Wired In-Wall PowerConnectors No assembly of parts. No wiring to electrical system Code Compliant throughout the US and Canada Safe - Click-it together like a safety belt MODEL ONE-CK Recessed extra deep 1.5” Extra wide opening for all types of TV cords. Works with super-slim mounts, creating more usable space behind your wall-mounted TV PRODUCT DIMENSIONS (w x d x h) 2.75” x 3.00” x 4.5” 6.9 x 9.5 x 11.4 cm PACKAGE DIMENSIONS (w x d x h) 7.75” x 4” x 7” 18.3 x 10.6 x 17.8 cm PACKAGE WEIGHT 2.4 lbs / 10.7 kg MASTER PACK QUANTITY 10 FINISH White In-wall power connectors ensure simple snap connection without the need for an electrician. Pre-wired 80” in-wall wire UPC 855877002868 CODE COMPLIANCY SUPPORT 1) NEC 2005 Article 334.40(B) One piece pre-assembled power-wiring with connectors Depth: 3.75” fits in any 2x4 - 2x6 framed wall PowerConnector tap-device 2) NEC Article 334.30 Unsupported NM Cable 3) NEC 2014 Article 400.7(A)(11) Permitted use of cord / approved kit using inlet to energize receptacle Meets all US states and cities adaptive to the National Electrical Code (NEC) allowing NM type building cable. Specific locations not allowing NM type building cable: ~Cook County, IL ~NYC, NY Conforms to UL Standards 498 & 514C AVAILABILITY Current Recessed, in-wall installation conceals component cables for a flawless finished look with brush pass-through 4.5” 2.75” plug into surge protector Code Compliant 6’ power-cord energizes PowerINLET from existing receptacle or external surge protector. Single-gang - Same size as a standard wall plate.

In-Wall Recessed Power Cable Management Dual Power - PowerConnect MODEL TWO-CK Conceal cables and power for your wall mounted TV Introducing the all new TWO-CK in-wall dual outlet power and cable management system. Perfect for motorized mounts. Same size as standard dual and single wall plates. Designed to simplify wiring behind wall-mounted flat-panel TV’s This discreet system allows low voltage cables and wires to be Power Extension In-Wall AV Cables In-Wall routed through the wall for a clean look. Code Compliant to install power, includes hardware and helpful mounting template make the TWO-CK the perfect do-it-yourself solution for any skill level, without the need for an electrician. No wiring, simple snap together PowerConnectors make this safe and easy. CK - ConnectorKit Series ONE-CK, TWO-CK So simple... You can do this! Pre-Wired In-Wall PowerConnectors No assembly of parts. No wiring to electrical system Code Compliant throughout the US and Canada Safe - Click-it together like a safety belt MODEL TWO-CK Dual PowerConnect Kit PRODUCT DIMENSIONS (w x d x h) PowerINLET 2.75” x 3.00” x 4.5” Recessed extra deep 1.5” Extra wide opening for all types of TV cords. Works with super-slim mounts, creating more usable space behind your wall-mounted TV PowerOUTLET 4.5” x 3.25” x 4.5” PACKAGE DIMENSIONS (w x d x h) 8.5” x 4” x 8” 21 x 10 x 19.3 cm PACKAGE WEIGHT 2.9 lbs / 12.1 kg MASTER PACK QUANTITY 10 In-wall power connectors ensure simple snap connection without the need for an electrician. Pre-wired 80” in-wall wire PowerOUTLET - Dual-gang Same size as a standard wall-plate. FINISH White UPC 855877002950 CODE COMPLIANCY SUPPORT 1) NEC 2005 Article 334.40(B) One piece pre-assembled power-wiring with connectors Depth: 3.75” fits in any 2x4 - 2x6 framed wall PowerConnector tap-device 2) NEC Article 334.30 Unsupported NM Cable 3) NEC 2014 Article 400.7(A)(11) Permitted use of cord / approved kit using inlet to energize receptacle Meets all US states and cities adaptive to the National Electrical Code (NEC) allowing NM type building cable. Specific locations not allowing NM type building cable: ~Cook County, IL ~NYC, NY AVAILABILITY Current Recessed, in-wall installation conceals component cables for a flawless finished look with brush pass-through Code Compliant 6’ power-cord energizes PowerINLET from existing receptacle or external surge protector. plug into surge protector 4.5” 2.75” PowerINLET - Single-gang Same size as a standard wall plate.

SoundBar Power Solution with PowerConnect MODEL SBCK Recessed, slim design power for your wall mounted SoundBar Introducing the all new SBCK in-wall recessed power and cable management system for popular wall-mounted SoundBars. Only 2.5” tall, designed to conceal behind slim SoundBars This discreet system allows digital audio cables to be Power Extension In-Wall routed through the wall for a clean look. AV Cables In-Wall Compliments a complete in-wall installation when installed with ONE-CK, TWO-CK, Power kits. No wiring, simple snap together PowerConnectors make this safe and easy. So simple... You can do this! CK - ConnectorKit Series ONE-CK, TWO-CK Pre-Wired In-Wall PowerConnectors No assembly of parts. No wiring to electrical system Code Compliant throughout the US and Canada Safe - Click-it together like a safety belt MODEL SBCK SoundBar Connector Kit PRODUCT DIMENSIONS (w x d x h) 11.75” x 2.0” x 2.5” 29.8 x 5 x 64 cm PACKAGE DIMENSIONS (w x d x h) 12” x 5” x 3” 30.5 x 12.7 x 7.6 cm PACKAGE WEIGHT 2.0 lbs / 8.9 kg MASTER PACK QUANTITY 10 FINISH White UPC 855877002974 CODE COMPLIANCY SUPPORT 1) NEC 2005 Article 334.40(B) SoundBar with ONE-CK Single Power Kit SoundBar with TWO-CK Dual Power Kit 1’ Prewired PowerConnector to TV Outlet Connector PowerConnector tap-device 2) NEC Article 334.30 Unsupported NM Cable 3) NEC 2014 Article 400.7(A)(11) In-wall Digital Audio Cable from TV to SoundBar Permitted use of cord / approved kit using inlet to energize receptacle Meets all US states and cities adaptive to the National Electrical Code (NEC) allowing NM type building cable. Specific locations not allowing NM type building cable: ~Cook County, IL ~NYC, NY AVAILABILITY January 2014 6’ Prewired PowerConnector to Power-Inlet Connector Recessed, in-wall installation conceals audio cables for a flawless finished look with rubber pass-through Completely recessed area for power cord Conceals behind SoundBars, allows for ultra-close wall mounting One piece pre-assembled power-wiring with connectors Depth: 2” fits in any 2x2 - 2x4 - 2x6 framed wall

In-wall PowerConnector Extension MODEL CKRE Extend PowerConnect Cable to remote location Introducing the all new CKRE in-wall power cable extension. Pre-assembled 10, 20, 30 foot lengths can be used to extend up to an additional 50’ distance for remote power locations. Ideal for custom installation above fireplace, remote equipment closet/room. Compliments a complete in-wall installation when installed with ONE-CK, TWO-CK, and SBCK Power kits. No wiring, simple snap together PowerConnectors make this safe and easy. Ideal for new home pre-wire CK - ConnectorKit Series ONE-CK, TWO-CK Pre-Wired In-Wall PowerConnectors MODEL No assembly of parts. No wiring to electrical system Code Compliant throughout the US and Canada CKRE Safe - Click-it together like a safety belt PRODUCT DIMENSIONS (Length) 10’- 20’ - 30’ 3.4 - 6.09 - 9.14 m Pre-Assembled 6’ Length from PowerOUT PACKAGE DIMENSIONS (w x d x h) 7” x 2” x 7” 17.78 x 5 x 17.78 cm Pre-Assembled Power Connector Extension Available 10’ - 20’ - 30’ Extend up to 50’ PACKAGE WEIGHT 1.0 lbs / 4.5 kg MASTER PACK QUANTITY 5 Pre-Assembled 1’ Length from PowerIN MODELS CKRE-10 CKRE-20 CKRE-30 CODE COMPLIANCY SUPPORT 1) NEC 2005 Article 334.40(B) PowerConnector tap-device 2) NEC Article 334.30 Unsupported NM Cable Meets all US states and cities adaptive to the National Electrical Code (NEC) allowing NM type building cable. Specific locations not allowing NM type building cable: ~Cook County, IL ~NYC, NY AVAILABILITY Current So simple... You can do this! Extend ONE-CK Single Power Kit Extend TWO-CK Dual Power Kit

Add a comment

Related presentations

Related pages

PowerBridge TWO-PRO-6 Cable Management System with Dual ...

Introducing the all new TWO-PRO in-wall dual outlet power and cable management system from PowerBridge. ... 6 Cable Management System with Dual Power for ...
Read more

PowerBridge ONE-CK Recessed In-Wall Cable Management ...

Conceal cables and power for your wall mounted TV Introducing the all new ONE-CK in-wall power and cable management ... PowerBridge In-wall Power and Cable ...
Read more

PowerBridge In-wall Power and Cable Management Kit ...

PowerBridge In-wall Power and Cable Management Kit. ... PowerBridge In-Wall Power Cable Management System designed for all wall ... Ask us a new question ...
Read more

DIY Cable Management - Pinterest

The PowerBridge Cable Sock: What the Best Dressed Cables Wear Neat cable management The new exclusive design of the PowerBridge PBCS Cable Sock is made ...
Read more

Hide TV Cables with PowerBridge In-Wall Power Extension ...

Hide TV Cables with PowerBridge In-Wall Power Extension Kit ... PowerBridge ONE-CK In-Wall Power Cable Management ... Try something new ...
Read more

PowerBridge In-Wall Power and Audio-Video Cable ...

Audio Extenders; Component Video Cat5 ... fit within metal and new-work electrical boxes. The PowerBridge™ kit comes with easy to ... CK In-Wall Power ...
Read more

Amazon.com: in wall cable management: Electronics

PowerBridge ONE-CK Recessed In-Wall Cable Management ... Wall Power and Cable Management ... XT New MAX In-Wall Power Management Extender System W ...
Read more

Authorized On-line PowerBridge Resellers

In-Wall Power Extension Cable Management for Flat Panel LCD, LED, OLED, Plasma Flat Screen ... PowerBridge In-Wall Power Cable Management Wall Mounting :
Read more

PowerBridge | So simple… You can do this!

Chicago New York Compliance Kit; DIY ... This is a very clever product that lets you quickly and safely get electrical power to a ... PowerBridge Logo and ...
Read more