Published on February 8, 2014
Mass damper – vibration absorber Eidos Engineering SRL
Mass damper development A mass damper is a vibration absorber able to attenuate significantly the vibrations of a structure or a machine. In the graph we report the frequency response of a machine with and without mass damper. The application of a mass damper gives an important increment of the global damping. Mass damper action 0.9 without mass damper with mass damper 0.8 Displacement [mm] 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0 300 600 900 1200 1500 Rotor speed [rpm] Frequency response measured on a vibrating machine 1800
Fields of application • Tool machines • Machine frames and chassis • Gears and transmissions • Stacks • Bridges and footbridges • Constructions • Energy generation plants • Wind turbines
Mass damper examples Eidos Engineering develops and supply new generation vibration absorbers, designed according to customer’s specifications. Mass damper for a stack Mass damper for a wind turbine A wide range of sizes is possible, starting from few grams for electronic devices, up to Mass damper for a tool machine some tons, for structures such as bridges or buildings.
Mass damper design Mass damper for a wind turbine Natural frequency of turbine at 0.47Hz Without mass damper With mass damper Mass damper for a stack Natural frequency of stack at 2.8Hz Without mass damper With mass damper
Assembling and testing Mass damper during testing on bench test Wire rope spring assembly
Mass damper for structures Displacement [m] without tuned mass damper Time [s] Dynamic analysis of a three stories structure. The graphs show the displacements of the structure under the 1976 Friuli earthquake without the application of a mass damper and with a mass damper placed at top. Displacement [m] with tuned mass damper Time [s] Friuli 1976 – Buja seismic station Displacement of the structure at top
Advantages • Up to 70% vibration reduction • Up to 70% stress reduction • Noise attenuation • Increased security • Opportunity to reduce weight and dimensions of mechanical structures • Simplicity and reliability
Main contact Eng. Stefano Galassi, Ph.D. e-mail: email@example.com mobile: +39 333 6907275 tel.: +39 0434 507547 fax: +39 0434 507546 web: www.eidosengineering.com headquarters: via Roveredo 20/b 33170 Pordenone, Italy
Dynamic Vibration Absorber – Tuned Mass Damper. Brad Gassner 10/19/15 Abstract Dynamic absorbers, or tuned mass dampers, may be used to attenuate ...
OPTIMAL DESIGN OF DAMPED DYNAMIC VIBRATION ABSORBER FOR ... vibration absorber (DVA) or tuned-mass damper ... way to attach a damper to the absorber mass.
Design of Vibration Absorbers Objective: To reduce the vibration of a primary device by adding an absorber to the system Applications: ... Tuned Mass Damper
Tuned Mass Damper - You find here 14 ... Tuned Mass Damper Manufacturers, Traders, Suppliers. ... SGF vibration absorbers are rubber spring-coupled single ...
Application of Tuned Mass Dampers To Control Vibrations of Composite Floor Systems ANTHONY C. WEBSTER and RIMAS VAICAITIS INTRODUCTION Although the ...
When a mass absorber is attached, ... MASS VIBRATION ABSORBER.m4v ... Taipei 101 tuned mass damper moving during earthquakes - Duration: ...
PROJECT FOR SECTION 3.11 Vibration Control: Vibration Absorbers xxix where v 1 5 !k 1>m 1 and v 2 5 !k 2>m 2 ... Suppose that we tune the tuned mass damper ...
Vibration Control back to list ↑ Dynamic absorbers and tuned mass dampers are the realizations of tuned absorbers and tuned dampers for structural ...
Tuned mass damper is a device mounted in structures to prevent discomfort, damage or outright structural failure by vibration. Renault use it on Formula 1 car!
Tuned Mass Dampers CEE 541. Structural Dynamics Department of Civil and Environmental Engineering Duke University Henri P. Gavin Fall 2016 1 Damped Primary ...