advertisement

Making renewable energy greener with oil analysis and contamination control

71 %
29 %
advertisement
Information about Making renewable energy greener with oil analysis and contamination control
Technology

Published on February 18, 2014

Author: KarrieWilliams

Source: slideshare.net

Description

Webinar Description:
Renewable Energy is important for many reasons. To remain viable as an alternative energy source these technologies must run reliably and at the lowest possible cost. Lubricated machines such as turbines and gearboxes require proper oil care and management. In this informative webinar led by C.C. Jensen's Justin Stover, you will learn practical steps that will make Renewable Energy greener; by conserving precious resources and slashing O&M costs.

Instructor: Justin Stover, C.C. Jensen, Inc.
Justin Stover earned his degree in 2001 in fluid power technology. He has more than 10 years experience in helping end users and OEM's in the Wind industry implement, develop and deploy contamination control programs. He is certified by the International Council for Machinery Lubrication as a Level 1 Machinery Lubricant Analyst.

For more information on reducing operating costs and increasing uptime in your equipment visit www.ccjensen.com and www.testoil.com.
advertisement

Making Renewable Energy GREENER with Oil Analysis and Contamination Control I. The Importance of Analysis and Filtration II. Case Studies III. Questions and Answers

The Importance of Analysis and Filtration Renewable Energy is Important to C.C.JENSEN Our Wind Turbine covers 40 % of our energy consumption

The Importance of Analysis and Filtration Renewable Energy is Important for Many Reasons… it’s Clean, Available, and Provides Security.

The Importance of Analysis and Filtration WIND TURBINES – Pushing the Design Envelope 2 million N-m (1,475,000 lb-ft) Extreme pressure on components BLADES 120 m (394 ft)

The Importance of Analysis and Filtration CLEAN OIL GEARBOX PITCH HYDRAULIC Extreme pressure BLADES 120 m (394 ft) on components MAIN BEARING GETS MORE AND MORE IMPORTANT

The Importance of Analysis and Filtration THE IMPORTANCE OF CLEAN OIL AND IT’S IMPACT ON RELIABILITY HAS BEEN KNOWN FOR DECADES “Replacing 40-25µm filters by units rated at 3µm absolute is to be recommended for gearboxes. Such action should lead to improved reliability, longer periods between overhaul, cheaper overhauls, and consequent reductions in ownership costs. Times between oil changes, where relevant, should be substantially increased.” 1979 The Influence of Filtration on Rolling Element Bearing Life Source: R. Bhachu, R. Sayles, and P.B. Macpherson

The Importance of Analysis and Filtration Did You Know? The estimated gearbox failure in a Wind Turbine is estimated at $250,000! Ref: NORIA

The Importance of Analysis and Filtration “Bearings Don’t Fail… They’re Murdered” Ref: NORIA

The Importance of Analysis and Filtration Did You Know? The estimated cost of an oil change is $5,000 on a Wind Turbine. LESS USE OF FOSSIL OIL LESS TRANSPORTATION LESS WASTE OIL IMPROVED FILTRATION IS ABLE TO KEEP THE OIL CLEAN AND MAKE IT LAST LONGER

The Importance of Analysis and Filtration Every Barrel Counts… 16,000 Wind Turbines X 100 Gallons = 29,090 Barrels Three-Year or Six-Year Oil Service Life – Which is GREENER?

The Importance of Analysis and Filtration Oil Analysis Reduces Maintenance and Downtime! PARTICLES WATER OXIDATION

The Importance of Analysis and Filtration End of Section I Take Away: No machine has ever failed because the oil was too clean; What get’s measured get’s done. Question: What is the most important parameter on your oil analysis test slate?

Case Study – Hydro Power

Case Study – Hydro Power “We sampled using the procedure and the iso(c) code came back as 13/11/8. That’s the cleanest our oil has been in years!”

Case Study – Hydro Power Used Filter Ideal for Filter Debris Analysis

Case Study – Hydro Power Filter Debris Analysis

Case Study – Wind Power “The oil at [our project] is the exact opposite of the [clean] oil, its beyond filthy!! We should have taken out disaster insurance on it…you would not believe or want to see what comes out of one of these when you turn it upside down. Well, maybe you would. It was the most disgusting, revolting lumpy stinky slime I’ve ever seen come from the bowels of the gearbox.”

Case Study – Wind Power

Case Study – Wind Power Filter Debris Analysis

Case Study – Wind Power

Case Study – Wind Power

Case Study – Wind Power 591500 PROBLEM •After 2 years using O.E.M 10-micron in-line filter – particle count + 500,000 4-micron 230000 particles per/100 ml. ISO 20/18/15 Date 129200 42800 “Since [upgrading our filtration] our oil analysis has showed considerable improvement, and our gearbox has yet to have a single bearing failure, vibration analysis alarm, or high-heat signature. We are likely to save major repairs – that may cost over $900,000” 50300 SOLUTION 16600 174003800 1200 incl. air bleed HDU 15/25 PV2-7-4 1x120V, 60hz hose > 4 micron > 6 micron > 14 micron Filter Insert: BG 15/25, 3 μm absolute filtration Pump flow: 57 L/h 01/24/2011 11-07-2010 02/25/2011 11/07/2010 01/24/2011 02/25/2011 > 4 micron 591,500 129,200 42,800 > 6 micron 230,000 50,300 16,600 > 14 micron 17,400 3,800 1,200 ISO Code 20/18/15 17/16/12 16/15/11

Case Study – Solar Power

Case Study – Solar Power

Case Study – Solar Power

Case Studies End of Section II Take Away: Identify oil problems and take action to correct; Monitor the oil to ensure progress is made. Question: What type of contamination do you most often see?

Q&A Questions & Answers

THANK YOU! For more information please contact: Justin Stover C.C. Jensen, Inc. justin@ccjensen.com 206-390-5438

Add a comment

Related presentations

Presentación que realice en el Evento Nacional de Gobierno Abierto, realizado los ...

In this presentation we will describe our experience developing with a highly dyna...

Presentation to the LITA Forum 7th November 2014 Albuquerque, NM

Un recorrido por los cambios que nos generará el wearabletech en el futuro

Um paralelo entre as novidades & mercado em Wearable Computing e Tecnologias Assis...

Microsoft finally joins the smartwatch and fitness tracker game by introducing the...

Related pages

Contamination Control | LinkedIn

View 7249 Contamination Control posts, ... Using Oil Analysis & Contamination Control to Improve ... Making renewable energy greener with oil analysis and ...
Read more

Making Renewable Energy "Greener" - Engineering

1. Making Renewable Energy GREENER with Oil Analysis and Contamination Control I. The Importance of Analysis and Filtration II. Case Studies III.
Read more

forms.testoil.com

... Making Renewable Energy Greener with Oil Analysis and Contamination Control DESCRIPTION:Making Renewable Energy Greener with Oil Analysis and ...
Read more

Sustainable energy - Wikipedia

Sustainable energy is energy ... Some costs could potentially be reduced by making use of energy storage ... Journal of Renewable and Sustainable Energy;
Read more

Cogeneration - Wikipedia

... Cogeneration plants face possible contamination of ... cogeneration into its energy policy ... Oil; Small gas turbine; Renewable ...
Read more

Renewable Energy - scribd.com

Renewable energy. Your questions answered Climate crisis: Time for an energy revolution 02 Final energy supply, UK / 2006 renewables 1% other 3% nuclear 3% ...
Read more

briony bennett | I am for energy that is safer, cheaper ...

I am for energy that is safer, cheaper and greener. ... briony bennett I am for energy that ... It is worth making renewable energy production more ...
Read more