Published on March 5, 2014
INTRODUCTION WHAT IS LEP? Construction Ink Jet Printing Active and passive matrix Basic principle and technology Light emission ADVANTAGES DISADVATAGES APPLICATIONS CONCLUSION REFERENCES THANKS.
In 1990, LEP was born at Cambridge University UK by researchers. Full color LEP driven displays are efficient brighter and easier to manufacture.
It is a polymer which emits light when voltage is applied to it. Thin film of semiconducting polymer sandwiched between two electrodes.
Recombination of the electrons and holes leads to the emission of light. Band gap determines the color of light emitted.
Indium-tin oxide used for anode and aluminum and calcium for cathode. Single-layered device work only under forward biased DC.
symmetrically configured works under AC as well as DC(reversed and forward) Spin coating machine is used for manufacturing
Red, green and blue polymers are jetted into well defined areas. Flim thickness has to be uniform to display uniform emission.
Color display are formed by positioning matrix of red, green and blue pixels. To control the pixels passive and active drivers are used.
Active display have transducers and in passive matrix each row and each column has its own driver. Passive display are prone to flickering but they are used where cheap and simple displays are required.
Single C-C bond consist of two electrons shared in overlapping wave functions. Spherical s-orbital and p-orbital form four equal unsymmetrical , tetrahedral, oriented hybridized sp^3 orbital.
A band formed by overlap of these hybridized orbitals from two carbon atom is referred to as sigma bond. Conjugated pi-bond refers to a carbon ring whose bond alternate between single and double bond.
Electroluminescence is process in which electromagnetic radiation is emitted from material when electric current is passed through it. Conduction in polymer is not same as in metals.
Require only 3.3 volts and have lifetime of more than 30,000 hours. Low power consumption. Self luminous. No viewing angle dependence. Display fast moving images with optimum clarity. Cost much less to manufacture and to run than CRTs because the active material is plastic. Can be scaled to any dimension.
Fast switching speeds that are typical of LEDs. No environmental draw backs. No power in take when switched off. All colors of the visible spectrum are possible by appropriate choose of polymers. Simple to use technology than conventional solid state LEDs and lasers. Very slim flat panel.
vulnerable to shorts due to contamination of substrate surface by dust. Voltage drops. Mechanically fragile. Potential not yet realized.
Polymer semiconductor is used to develop efficient solar cells and light detector. Philips will demonstrate its first polyLED based prototype based on organic light emitting diode technology.
Uses the light emitting diode to respond the baby’s activity.
Organic material are being used to transform the display technology. Using light emitting diodes organic full color displays may replace LEDs in laptop and even desktop computers. Such display can be deposited on flexible coils eliminating fragile and heavy glass substrates used in LCDs. First products using organic display is already in market.
www.cdtltd.co.uk www.research.philips.com www.covion.com IEEE JOURNAL
Polymer light-emitting diodes (PLED), also light-emitting polymers (LEP), involve an electroluminescent conductive polymer that emits light when connected ...
Figure 1. Schematic illustration of a polymer light emitting diode (PLED). HIL=hole injection layer, usually a spin-cast film of an inherently conductive ...
Polymer Bulletin from the Polymer Library, providing updates on the latest information about Light Emitting Polymers
Device efficiencies have been improved via a combination of polymer and device modifications. The light emitting polymer (LEP) has been modified to ...
MEEN 3344 Materials Light Emitting Polymers Presented by: Diana Izaguirre Light Emitting Polymers A light emitting polymer is an electro-luminescent plastic.
Eine organische Leuchtdiode (englisch organic light emitting diode, ... Für die aus Polymeren gefertigten organischen LEDs hat sich die Abkürzung PLED (engl.
Overview. Cambridge Display Technology leads the development of display technology based on polymer organic light emitting diodes. We expect to see our ...
Record 1 ( 1062903 ) Macromolecular Chemistry and Physics 211, No.3, 1st Feb.2010, p.313-320 ISSN: 1022-1352 CODEN: MCHPES PHASE SEPARATION IN POLY(9,9 ...
Seminar report Light Emitting Polymer HISTORY OF LIGHT EMITING POLYMER
Browse Sigma-Aldrich's Light-Emitting Polymers (LEPs) to find products in Cyano-Polyphenylene vinylene (CN-PPV), Nitrogen-Containing Polymers, Poly ...