J&P Building Systems Ltd - *ISOPRO Balcony Connectors

50 %
50 %
Information about J&P Building Systems Ltd - *ISOPRO Balcony Connectors
Business

Published on May 23, 2014

Author: JPBuildingSystems

Source: slideshare.net

Description

ISOPRO Balcony Connectors

J&P Building Systems Ltd ISOPRO Balcony Connectors

J&P Parent Partnership Companies J&P Building Systems is the supply partner in the UK for our parent companies

ISOPRO

ISOPRO - What is it for? ISOPRO is the answer to thermal bridging problems in concrete constructions. ISOPRO is the thermal break!

What does the problem look like?

What does the problem look like?

Thermal bridges are local component areas in building envelope with increased heat loss. Because of increased heat loss there is a lowering of internal surface temperature. If these fall below the minimum surface temperature θsi of 12,6°C , it promotes mould growth. Definition of thermal bridges

ISOPRO - positive effects Reduces loss of heat Saves heating energy Creates higher surface temperature inside Adds to a more comfortable residential climate Reduces building deficiencies Reduces CO2 emission

Theoretical with 100 % insulation Isopro

There is no such thing as a thermal break! The best you can hope for is the minimal disruption of the insulation All structural systems compromise the insulation to some extent

Balcony connected by continuous concrete construction – no thermal provision

Temp < 12.6 deg = risk of mould

Balcony connected to slab with 100% thermal break

Balcony connected to slab with ISOPRO – with insulation

Cantilevering balcony Balcony on columns

Tension bars: Stainless steel - black steel welded Shear load bars: Stainless steel- black steel welded Pressure bearing: Special high-strength concrete with sliding bearing Static elements of ISOPRO

ISOPRO Type IPT

bending moment traction - tension bars pressure - concrete pressure bearings Shear load Shear load - shear load bars The way ISOPRO works ...

ISOPRO - installed in a building with facing brick

ISOPRO in prefabrication

If there is a requirement for fire resistance class F-90 then the ISOPRO elements are equiped with a fireproofing plate ISOPRO – fire protection F90

1. Concept of working loads (service loads) 2. Concept of design loads (assumed loads) 3. Concept of failure loads (ultimate loads) Design concepts

Calculating force Material Safety factor 1.0 Safety depends on material (normaly 50 – 80 %) Concept of working loads

Calculating force Material Safety factor on dead loads 1.35 Safety factor on live loads 1.50 Safety depends on material (normally 15 %) Concept of design loads

Calculating force material safety factor normally 1.7 – 1.9 safety on material minimal (normally 5 %) Concept of failure loads

Dimension of balcony and loads Example of design

γpermanent = 1.00 γv ariable = 1.00 Safety factors Forces Choosen ISOPRO, permissible loads Example of design working loads Client: Formaco Project: Presentation Editor: Björn Wingerter component balcony corbeling out free system F1 lk = 1.80 [m] overhang q F2 h d = 20.0 [cm] board thickness d2 = 4.5 [cm] coating lk1 = 1.92 [m] axis of structural design lk = 1.80 m h = 1.10 [m] height of balustrade γpermanent = 1.00 γv ariable = 1.00 loading g1 = dead load = 5.00 [kN/m²] g2 = coating = 0.99 [kN/m²] p = live load = 4.00 [kN/m²] q = area load factored = 9.99 [kN/m²] F1 = horizontal load = 0.50 [kN/m] F2 = balustrade 1.00 [kN/m] F1 = lineload factored = 0.50 [kN/m] F2 = lineload factored = 1.00 [kN/m] cuttingforce m = 20.81 [kNm/m] v = 18.98 [kN/m] dimensioning choosing: IP 12/8 B = 20 cm mRd = 25.0 [kNm/element] vRd = 29.0 [kN/element] Calculation has to be proved and released! date 19/10/2012 static compiled: i.A. signature Am Güterbahnhof D-79771 Klettgau 1 Tel.: 07742 - 92 15 20 TYPECERTIFICATED

Client: Formaco Project: Presentation Editor: Björn Wingerter component balcony corbeling out free system F1 lk = 1,80 [m] overhang q F2 h d = 20,0 [cm] board thickness d2 = 4,5 [cm] coating lk1 = 1,92 [m] axis of structural design lk = 1,80 m h = 1,10 [m] height of balustrade γpermanent = 1,35 γv ariable = 1,50 loading g1 = dead load = 5,00 [kN/m²] g2 = coating = 0,99 [kN/m²] p = live load = 4,00 [kN/m²] q = area load factored = 14,09 [kN/m²] F1 = horizontal load = 0,50 [kN/m] F2 = balustrade 1,00 [kN/m] F1 = lineload factored = 0,68 [kN/m] F2 = lineload factored = 1,35 [kN/m] cuttingforce m = 29,20 [kNm/m] v = 26,71 [kN/m] dimensioning choosing: IP 12/7 B = 20 cm mRd = 33,7 [kNm/element] vRd = 41,5 [kN/element] Calculation has to be proved and released! date 15.05.2007 static compiled: i.A. signature Am Güterbahnhof D-79771Klettgau 1 Tel.: 07742 - 92 15 20 Fax: 07742 - 92 15 96 TYPECERTIFICATED γpermanent = 1.35 γv ariable = 1.50 Safety factors Forces Choosen ISOPRO, permissible loads Example of design design loads

γpermanent = 1.00 γv ariable = 1.00 Safety factors Forces choosen ISOPRO, permissible loads working loads design loads γpermanent = 1.35 γv ariable = 1.50 Safety factors Forces choosen ISOPRO, permissible loads Example of design Comparison of calculation

Balkon WandIso Var.l Wall Balcony Balkon WandIso Var.ll Wall Balcony ISOPRO Var. I Connecting a balcony to a wall downward ISOPRO Var. IIConnecting a balcony to a wall upward ISOPRO - Variations

ISOPRO Balkon Decke WandIso ISOPRO Var. III Connecting a balcony to a ceiling with offset Connecting a balcony to a ceiling with a small offset Balcony Balcony Ceiling Ceiling ISOPRO - Variations Balkon Decke WandIso Var.lll

Balkon einspringend IPTD IPTD ISOPRO – Type IPTD

ISOPRO – elements for bending moment and shear Type IPT Type IP Type IPT corner Type IPTD

ISOPRO – elements for shear Type IPQ Type IPQQ Type IPQQS Type IPQS

160-240 Connecting a roof parapet to a ceiling ISOPRO – Type IPA

ISOPRO – Type IPF Connecting a balustrade to a ceiling

Connecting a console to a ceiling Gleitfolie Stahlbeton- konsole Weichfaser- platte 150-160 60 ISOPRO – Type IPO

Connecting a concrete beam to a ceiling / wall ISOPRO – Type IPS

Connecting a wall element to a wall ISOPRO – Type IPW

In addition to the numerous European product quality approvals of our parent companies, J&P is locally committed to the highest standards of manufacture and environmental awareness.  UK CARES  ISO 9001  ISO 14001  Green Achiever GENERAL Additional information

In addition to the products we supply J&P Building Systems have developed an enviable reputation for providing our customers: • Design assistance • Bespoke fabrications • CPD Seminars • On-site support • Technical guidance GENERAL Additional information

J&P Building Systems Ltd Thame Forty Jane Morbey Road Thame Oxon OX9 3RR T: +44 (0)1844 215 200 F: +44 (0)1844 263 257 E: enquiries@jandpbuildingsystems.com W: jandpbuildingsystems.com GENERAL

- THANK YOU -

Add a comment

Related presentations

Boat chandlery

Boat chandlery

October 26, 2014

http://ecommerce-for-business.com/shackles-boats-theboatonlinestore/ We offer a ...

http://vendere-su-internet.com/shackles-for-boats-from-theboatonlinestore/ Moori...

Silver bar!

Silver bar!

October 21, 2014

Pretty similar to gold bars are these silver slabs. Silver is considered as the mo...

Gold coin prices!

Gold coin prices!

October 21, 2014

If you are an investor of gold bars and coins, one of the major things that you ou...

CyberSecurity's social media stats for one week as of Oct 21st 2014

CyberSecurity's social media stats for one week as of Oct 28th 2014

Related pages

ISOPRO balcony connectors Archives - J&P Building Systems

J&P Building Systems Ltd – ISOPRO Balcony Connectors from J and P Building Systems. ... ISOPRO, ISOPRO balcony connectors J&P Building Systems ...
Read more

J&P Building Systems

... H-BAU RAPIDOBAT ISOMAXX ISOPRO J&P Building Supplies J&P building ... Balcony Connection System; ... J&P Building Systems Ltd. Thame Forty Jane ...
Read more

Stuart Baldwin | LinkedIn

View Stuart Baldwin’s professional profile on ... Sales Executive at J&P Building Systems. Location ... Isopro Thermal Break Balcony Connectors, ...
Read more