How to Download NX from the Siemens PLM website

50 %
50 %
Information about How to Download NX from the Siemens PLM website
Technology

Published on March 10, 2014

Author: SwooshTech

Source: slideshare.net

Description

Once NX has been purchased there are just a few steps involved in getting the software running on your computer. The first step is to copy the software onto the desired computer and traditionally this has been accomplished using the CD/DVD that Siemens ships to the customer after purchase. Today, this process is streamlined greatly by the ability to simply download the program from Siemens’ GTAC website using a Webkey account. Once downloaded, a click to open the installation executable is all that’s needed to successfully install the program. Take note that the download involves a zip file in excess of 3 Gb so plan accordingly and benefit from downloading it directly onto the computer intended for running NX rather than copying the zip file from one to another. Also note that licensing and configuration are separate tasks to be handled after the downloading and installation.

Downloading NX from the Siemens website Before installing NX the installation package needs to be copied onto the computer intended to be used. Because of the large amount of data involved, this will usually involve downloading a zip file onto the computer, unzipping, and then running the setup routine included in that zip file. This document covers how to acquire the zip files from the Siemens website.

• Connecting to the Siemens GTAC (Global Technical Access Center) website • Navigating to the download site for the desired NX product and version • Downloading the installation data • Downloading the help docs data • Downloading maintenance release data Overview

The NX software is a large amount of data and downloading it may take hours to complete. It is best to prepare tasks beforehand that can be completed while the NX files download - especially tasks that do not involve the computer used for the download. Use your time wisely.

Connect to Siemens GTAC • To connect to the Siemens GTAC site, go to: • http://support.industrysoftware.automation.siemens.com/gtac.shtml • Select the option for “Download & Upload Files”

Select the “Product Download” button This may take a few minutes depending on your computer, type of connection, speed of internet service, etc.

The array of Siemens software products appear…

Select the “NX/Unigraphics NX” product on the left side of the array. Next the supported platform options will appear:

Select the desired platform and all available versions of NX will appear. Note that NX9 is only offered on the Windows (64-bit Intel) option.

It is highly recommended to read the “README.TXT” file before going any further. • Note the size of the zip file about to be downloaded (file #18, for instance). • Not only is it important to consider the available memory on the device where downloading is to take place but also the size of the extracted data in the computer where NX will be installed.

The README text file will display in the browser.

Select the desired NX version.The “base version”, i.e. NX9.0.0, must already be installed before installing a subsequent “point release” (i.e. NX9.0.1). Save the zip file to the location (pathname) where you want the compressed files to be extracted. Generally, it is advisable to create a standard subfolder for all zipped NX versions. When installing, NX will prompt for the actual location of the program.

Wait for the download to complete. Again, the NX software is a very large amount of data and depending on your computer, type of connection, speed of internet service, etc., completion of the download can take hours. For that reason, it is advisable to perform this download while other tasks can be performed (ideally not on the same computer where this download is taking place).

After the NX download is complete, the NX documentation (Help Docs) should also be downloaded… Note that the “ugdoc” zip files are offered in various languages so be sure to select the correct file!

Now you are ready to unzip (uncompress) the downloaded files and install the NX software. See the “How to Install NX” document offered by Swoosh Technologies.  Contact Swoosh to request this document today!  www.SwooshTech.com  (314) 549-8110 Download is complete.

To download NX help docs, go to the GTAC “Download & Upload Files” link. Select the “NX/Unigraphics NX” option drop down…

Select “ugdoc/” from the list.

Select the appropriate NX version.

Select the specific point release. Download the base version first and save it to the same location as the NX zip file downloaded before.

Click to add check marks on the desired documents, select “Add Checked”.

Select to check the desired file(s) and then select the format.

To download NX updates go to the GTAC “Download & Upload Files” link. Select the “NX/Unigraphics NX” option drop down…

Select “maintenance-release/” from the list

Again, select to check the desired doc and then select the format (ZIP or tar)

Remember: • Check for sufficient memory on the computer before you download. • Use your time more effectively! Plan for the download times and copying to other computers. • It may save more time to connect the computer to the internet and download the the NX installation(s) directly instead of downloading and copying to from computer to computer. This completes the processes for downloading NX, NX help doc’s, and NX maintenance releases from the Siemens website.

Add a comment

Related presentations

Presentación que realice en el Evento Nacional de Gobierno Abierto, realizado los ...

In this presentation we will describe our experience developing with a highly dyna...

Presentation to the LITA Forum 7th November 2014 Albuquerque, NM

Un recorrido por los cambios que nos generará el wearabletech en el futuro

Um paralelo entre as novidades & mercado em Wearable Computing e Tecnologias Assis...

Microsoft finally joins the smartwatch and fitness tracker game by introducing the...

Related pages

Siemens PLM Software Offers First-Ever Free Download of ...

Siemens PLM Software Offers First ... Press Release Siemens PLM Software Offers First ... Siemens PLM Software. “By providing a free download of ...
Read more

NX: Siemens PLM Software

NX von Siemens PLM Software deckt mit seiner umfassenden CAD-, ... Choose another website Wählen Sie ein Land/Region. Argentina | Español; Australia ...
Read more

How to Acquire an NX9 License File from Siemens PLM

Acquiring the NX Setup Program. Download the utility from the Siemens PLM website or contact Swoosh Technologies support for the getcid.exe utility and run ...
Read more

Siemens NX - Wikipedia, the free encyclopedia

Siemens NX, User Forums (not an official site from Siemens PLM) Official website; NX on YouTube; ... Siemens NX; SolidWorks; StressCheck; RFEM; Working Model
Read more

How to install Siemens PLM server for NX 9.0 - GrabCAD

Ask and answer questions and download ... How to install Siemens PLM server for NX 9 ... files and all associated content posted to this website are ...
Read more

Siemens PLM NX download - Information about the software ...

Find out which file extensions from our database are supported by the application Siemens PLM NX. ... Siemens PLM NX download. On our website we do not ...
Read more

Home - Siemens PLM Community

Online community for users of Siemens PLM Software. SIEMENS. ... There are some unique challenges to the industry though, that NX CAE can address.
Read more

The NX Machinery Library - Endesin Corporation

The NX Machinery Library Click ... The first step obviously is to download the library from Siemens support website. ... you will be directed to the ...
Read more

NX Design Blog - Siemens PLM Community

Siemens PLM Software Community. ... Siemens PLM Community: NX Design: NX Design Blog; Blog Options. ... Download the posters for free.
Read more