Epocast® 1622 FST A/B - Flyer

67 %
33 %
Information about Epocast® 1622 FST A/B - Flyer

Published on March 3, 2014

Author: HuntsmanAdMatEU

Source: slideshare.net

Advanced Materials   1622 FST A/B Aerospace low density epoxy syntactic Epocast® 1622 FST A/B is a two component, extrudable, low density, epoxy syntactic material. Epocast® 1622 FST A/B is designed for applications requiring a high degree of flammability resistance combined with low smoke density and toxicity. Epocast® 1622 FST A/B is a fast curing syntactic supporting weight reduction thanks to its low density. Applications in aerospace and transport interiors > Honeycomb panel reinforcement > Edge closeout > Panel Joining > Fastener potting Key features > Fast gel time of 15 minutes >  oom temperature (3 to 5 days) R or heat cure (3 to 5 hours at 55°C) > FST properties (meets FAR 25.853) > Low Density of 0.77 > High compressive strength > Thixotropic paste > No SVHC as defined under REACH > Available in Semkit cartridges for easy use

1622 FST A/B Aerospace low density epoxy syntactic Typical thermal and mechanical performance Tg ASTM-E1545 Insert pull-out strength Compressive strength 78°C 1 300 N at 23°C ASTM-D695 60 MPa at 23°C 20 MPa at 70°C Compressive modulus ASTM-D695 2.5 GPa at 23°C Tensile lap shear, Al / Al ASTM-D-1002 12 MPa at 23°C Shrinkage ASTM-D-6289 0.4% CTE below / above Tg ASTM-E-831 40 / 80 µm/(m.°C) Cure cycle: 5h at 55°C Typical FST performance Epocast® 1622 FST A/B Standard FAR 25.853 requirements Vertical burn 12 s Burn length Extinguish time < 3 mm <1s 203 mm 15 s Toxic gas concentration of smoke at 4 min HCN CO NOx SO2 HCl HF 5 ppm 65 ppm 60 ppm 15 ppm 5 ppm 1.5 ppm Smoke density after 4 min ASTM-E-662 90 Learn more on www.huntsman.com/advanced_materials For any other information, please send an e-mail to advanced_materials@huntsman.com Europe +41 61 299 20 41 India, Middle East, Africa & Turkey + 91 22 4095 1556 Asia / Pacific + 86 21 2208 7588 Americas +1 888 564 9318 Legal information All trademarks mentioned are either property of or licensed to Huntsman Corporation or an affiliate thereof in one or more, but not all, countries. Sales of the product described herein (“Product”) are subject to the general terms and conditions of sale of either Huntsman Advanced Materials LLC, or its appro­ riate affiliate including without limitation Huntsman Advanced Materials (Europe) BVBA, Huntsman Advanced Materials Americas Inc., or Huntsman Advanced p Materials (Hong Kong) Ltd. or Huntsman Advanced Materials (Guangdong) Ltd. (“Huntsman”). The following supercedes Buyer’s documents. While the information and re­ om­ endations included in this publication are, to the best of Huntsman’s c m knowledge, accurate as of the date of publication, NOTHING CONTAINED HEREIN IS TO BE CONSTRUED AS A REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT OF ANY INTELLEC­ UAL PROPERTY RIGHTS, OR WARRANTIES AS TO QUALITY OR CORRESPONDENCE WITH PRIOR DESCRIPTION OR SAMPLE, AND THE BUYER T ASSUMES ALL RISK AND LIABILITY WHATSOEVER RESULTING FROM THE USE OF SUCH PRODUCT, WHETHER USED SINGLY OR IN COMBINATION WITH OTHER SUBSTANCES. No statements or recommendations made herein are to be construed as a representa­ion about the suitability of any Product for the particular application of Buyer or user or as an inducement to infringe any patent or other intellectual property right. Data and results are based on controlled conditions and/or lab t work. Buyer is responsible to determine the applicability of such information and recommendations and the suitability of any Product for its own particular purpose, and to ensure that its intended use of the Product does not infringe any intellectual property rights.The Product may be or become hazardous. Buyer should (i) obtain Material Safety Data Sheets and Technical Data Sheets from Huntsman containing detailed information on Product hazards and toxicity, together with proper shipping, handling and storage procedures for the Prod­ ct, (ii) take all steps necessary to adequately inform, warn and familiarize its employees, agents, direct and in direct customers and contractors who may handle or be exposed to the Product of all u hazards pertaining to and proper procedures for safe handling, use, storage, transportation and disposal of and exposure to the Product and (iii) comply with and ensure that its employees, agents, direct and indirect customers and contractors who may handle or be exposed to the Product comply with all safety information contained in the applicable Material Safety Data Sheets, Technical Data Sheets or other instructions provided by Huntsman and all applicable laws, regulations and standards relating to the handling, use, storage, distribution and disposal of and exposure to the Product. Please note that products may differ from country to country. If you have any queries, kindly contact your local Huntsman representative. © 2014 Huntsman Corporation. All rights reserved. Ref. No. AdMat Epocast® 1622 FST A / B_02.14_EN_EU

Add a comment

Related presentations

Related pages

Epocast® 1622 FST A/B - Flyer - Documents

1. Advanced Materials 1622 FST A/B Aerospace low density epoxy syntactic Epocast® 1622 FST A/B is a two component, extrudable, low ...
Read more

EPOCAST 1622 FST A/B Epoxy Syntactic - Huntsman Corporation

EPOCAST® 1622 FST A/B Page 2 of 3 July, 2013 . CTE (below Tg), µm/(m ... 1622 FST A/B epoxy syntactic adhesive should be stored in a dry place,
Read more

New Low-density, FST Epoxy Edge Filler from Huntsman ...

New Low-density, FST Epoxy Edge Filler from Huntsman Advanced Materials . ... Epocast® 1622 FST A/B is a two-component, flame -retardant epoxy syntactic/edge
Read more

EPOCAST 1622 FST A/B - Adhesive - The Martin Company

epocast 1622 fst a/b. part number/ material: ... epocast 615 b, epocast 1843ab, epocast 1622 fst a/b, epocast 1652 ab, epocast 1656, epocast 1631a/b, ...
Read more

Epocast 1622 FST A/B Huntsman Adv Matl - UL Prospector

... EPOCAST® 1622 FST A/B is a two ... EPOCAST® 1622 FST A/B sets quickly at room temperature and is well suited for aerospace applications ...
Read more

EPOCAST 1622 FST A/B 6OZ HUN00 - Aerospace - Industries ...

Epocast 1622 FST A/B is a two component, low density, ... Epocast 1622 FST, Huntsman Epocast 1622 FST: Documentation. Material Safety Data Sheet: MSDS FINDER:
Read more

Epocast Plastic Materials Supplied by Huntsman Advanced ...

Epocast 1622 FST A/B: Epoxy North America High Strength; Low Density Adhesives; Aerospace Applications; Fasteners; Stru... Epocast 1627-2: Epoxy
Read more

Epibond® 8000 FR A/B - Flyer - Documents

Share Epibond® 8000 FR A/B - Flyer. ... Araldite® 1570 FST A/B - Epibond® 8000 FR A/B – Flyer ... Epocast® 1622 FST A/B - Flyer
Read more