Epibond® 8000 FR A/B - Flyer

50 %
50 %
Information about Epibond® 8000 FR A/B - Flyer

Published on March 3, 2014

Author: HuntsmanAdMatEU

Source: slideshare.net

Advanced Materials  8000 FR A/B Flame-retardant aerospace adhesive Epibond® 8000 FR A/B is a two-component, flame-retardant epoxy structural adhesive. Epibond® 8000 FR A/B is designed for applications requiring flame retardancy and FST (flame, smoke, toxicity) properties. This product meets flammability requirements such as the 12 second burn test in neat resin form. Many other products can only pass in composite form. Epibond® 8000 FR A/B is off white in color when mixed and spreads easily. Applications in aerospace >  onding aircraft interior honeycomb panels, metals and B composite materials as well as insert bonding >  ften these panels are used in overhead storage bins, O interior walls, galleys, lavatories and other service areas inside the cabin Key features > Intermediate work time (55 min) > Room temp (5 to 7 days) or heat (1,5h at 60°C) cure > High shear, high peel strength > FST meeting requirements of FAR 25.853 > Thixotropic paste > Very low halogen, antimony free > No SVHC as defined under REACH > 2:1 mix ratio, dual barrel cartridge pack sizes

8000 FR A/B Flame-retardant aerospace adhesive Typical thermal and mechanical performance Tensile lap shear strength ASTM D-1002 Al / Al 27 MPa at 25°C 17 MPa at 70°C 6 MPa at 90°C 16 MPa at 25°C* Roller peel strength ASTM D-3167 Tensile strength ASTM D-638 4 N/mm at 25°C Neat resin 36 MPa at 25°C 3 400 MPa E-modulus Flexural strength ASTM D-790 62 MPa at 25°C 3 000 MPa Flexural modulus Compressive strength ASTM D-695 110 MPa at 25°C TG by DSC ASTM D-3418 72°C Shore D hardness ASTM D-2250 85 Shear modulus G’ ASTM D-5279 1 500 MPa at 25°C 210 MPa at 70°C *After 14 days at 70°C and 95% RH I Cure cycle: 1,5h at 60°C Typical flammability performance Flame extinguish time Burn length Drip extinguish time Vertical burn 60 s, honeycomb panel Outside or inside burn CFR 25.853, ap. F, part 1 < 10 s < 2.5 cm <1s Vertical burn 50 s on neat resin 0,65 x 7,5 x 30,5 cm CFR 25.853, ap. F, part 1 1.75 s 3.3 cm no drip Vertical burn 60 s on neat resin 1,3 x 1,3 x 30,5 cm FAR 25.853, ap. F 10 s 7 cm no drip Typical FST performance Specific optical density Smoke density after 4 min ASTM E-662 HCN CO - Ref NOx SO2 + H2S HF HCl 25 ppm 85 ppm 80 ppm 10 ppm 1.5 ppm 5 ppm 97 Toxic gas concentration of smoke at 4 min Learn more on www.huntsman.com/advanced_materials For any other information, please send an e-mail to advanced_materials@huntsman.com Europe +41 61 299 20 41 India, Middle East, Africa & Turkey + 91 22 4095 1556 Asia / Pacific + 86 21 2208 7588 Americas +1 888 564 9318 Legal information All trademarks mentioned are either property of or licensed to Huntsman Corporation or an affiliate thereof in one or more, but not all, countries. Sales of the product described herein (“Product”) are subject to the general terms and conditions of sale of either Huntsman Advanced Materials LLC, or its appro­ riate affiliate including without limitation Huntsman Advanced Materials (Europe) BVBA, Huntsman Advanced Materials Americas Inc., or Huntsman Advanced p Materials (Hong Kong) Ltd. or Huntsman Advanced Materials (Guangdong) Ltd. (“Huntsman”). The following supercedes Buyer’s documents. While the information and re­ om­ endations included in this publication are, to the best of Huntsman’s c m knowledge, accurate as of the date of publication, NOTHING CONTAINED HEREIN IS TO BE CONSTRUED AS A REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT OF ANY INTELLEC­ UAL PROPERTY RIGHTS, OR WARRANTIES AS TO QUALITY OR CORRESPONDENCE WITH PRIOR DESCRIPTION OR SAMPLE, AND THE BUYER T ASSUMES ALL RISK AND LIABILITY WHATSOEVER RESULTING FROM THE USE OF SUCH PRODUCT, WHETHER USED SINGLY OR IN COMBINATION WITH OTHER SUBSTANCES. No statements or recommendations made herein are to be construed as a representa­ion about the suitability of any Product for the particular application of Buyer or user or as an inducement to infringe any patent or other intellectual property right. Data and results are based on controlled conditions and/or lab t work. Buyer is responsible to determine the applicability of such information and recommendations and the suitability of any Product for its own particular purpose, and to ensure that its intended use of the Product does not infringe any intellectual property rights.The Product may be or become hazardous. Buyer should (i) obtain Material Safety Data Sheets and Technical Data Sheets from Huntsman containing detailed information on Product hazards and toxicity, together with proper shipping, handling and storage procedures for the Prod­ ct, (ii) take all steps necessary to adequately inform, warn and familiarize its employees, agents, direct and in direct customers and contractors who may handle or be exposed to the Product of all u hazards pertaining to and proper procedures for safe handling, use, storage, transportation and disposal of and exposure to the Product and (iii) comply with and ensure that its employees, agents, direct and indirect customers and contractors who may handle or be exposed to the Product comply with all safety information contained in the applicable Material Safety Data Sheets, Technical Data Sheets or other instructions provided by Huntsman and all applicable laws, regulations and standards relating to the handling, use, storage, distribution and disposal of and exposure to the Product. Please note that products may differ from country to country. If you have any queries, kindly contact your local Huntsman representative. © 2014 Huntsman Corporation. All rights reserved. Ref. No. AdMat Epibond® 8000 FR A/B_02.14_EN_EU

Add a comment

Related presentations

Related pages

Epibond 8000 FR A/B Flame-retardant Epoxy Structural Adhesive

Epibond® 8000 FR A/B Flame-retardant Epoxy Structural Adhesive. KEY PROPERTIES ...
Read more

EPIBOND 8000FR A/B - Adhesive - Aerospace Specialty ...

EPIBOND 8000FR A/B. To receive a quote for EPIBOND 8000FR A/B, ...
Read more

New High-Performance Epoxy Products for Aerospace

... high-performance products to the aerospace market. Whether it’s to address aircraft design and ... Epibond® 8000 FR A/B is a two-component, ...
Read more

BODO MÖLLER CHEMIE - Klebstoffe, Epoxidharz, Gießharz ...

Epibond® 8000 FR Erfüllt ... Araldite® 420 A/B (verfügbar in der EU)
Read more

Search - Dreambox | dream-multimedia-tv.de

Search. Search this site: DreamWiki. Home; News; Products. Dreambox. ... Product flyer; Product overview; 360° Animation; Report illegal Dreambox! Report ...
Read more

Krayden, Inc. | LinkedIn

Krayden, Inc.’s inventory is constantly being monitored for ... check out Epibond® 8000 FR from ... Araldite EP 200 A/B flexible epoxy adhesive offers ...
Read more

Save.ca - Flyers, Online Flyers, Store Flyers and More

ENG FR. shopping list shopping list. 0 . my coupons my coupons. 0. Login ... View flyers, create shopping lists, earn cash back, and more!
Read more