EADDR Statistics Generator

33 %
67 %
Information about EADDR Statistics Generator
Design

Published on November 14, 2008

Author: Anklebuster

Source: slideshare.net

Description

This user guide is part of my extended portfolio on www.morphodesigns.com

EADDR Statistics Generator: User's Guide Data Source Log in to Hyperion. Information not displayed. Information not displayed. Figure 2: Click DEMI-DIR Figure 1: Type demi into browser Information not displayed. Figure 3: Click Launch H9 Reports Figure 4: Enter User Name and Password 1

Navigate to the appropriate query. Figure 5: Double-click the EADDR folder Figure 6: Right-click Non_Precise_Address_Detail_Listing_by_Corp Figure 7: Open As Interactive Reporting Web Client Figure 8: Query opens in a new window 2

Select all eight corps (or whichever ones you need) before clicking Process. Figure 9: Select all required Corps Figure 10: Click Process and wait ... 3

After about 15 minutes, the query results will be displayed. Click Export Data. Figure 11: ... The Results! Click Export Data. 4

Save the results as Hyperion 2008mmdd.xls, where mm and dd are month and day. Figure 12: Save the Results 5

Data Conversion The spreadsheet exported by Hyperion must be upgraded to version 2003. Do this by double-clicking Hyperion 2008mmdd.xls On the File menu, click Save As … In the dialog box, change the file type to Microsoft Excel 97 - Excel 2003 & 5.0/95 Workbook (*.xls) Click Save. Figure 13: Upgrading the Hyperion Spreadsheet Figure 14: The quot;Save Asquot; dialog box 6

Data Processing Make a copy of EADDR Stats Generator.mdb on your hard drive.(You can't run it from the network drive.) Double-click EADDR Stats Generator.mdb and click Data Prep to open the Data Prep form. Click the import button to select the upgraded Hyperion spreadsheet. Figure 15: Click Data Prep Figure 16: Import the Upgraded Hyperion spreadsheet 7

Double-click the spreadsheet. The file is automatically imported and tallied. Figure 17: Select the spreadsheet 8

Data Output A new spreadsheet is generated automatically, as well! Figure 18: The statistics are generated Look at the blue status bar to make sure you imported the correct spreadsheet. Review the list of processed FTax groups. You can add new FTax Groups using the FTax Manager. Figure 19: Verify your data source! 9

Data Presentation The spreadsheet that you just created is text-only. Do not copy and paste data from it to the master spreadsheet! If you want to print the spreadsheet, you should adjust the column widths as shown. In addition, you'll need to go to the Page Setup option under the File menu. Change the page orientation to landscape. Figure 20: EADDR Statistics, ready to go! 10

Troubleshooting I Forgot the Password The password is xxxxxxxxxxx I Got a Run-time Error #3274! Figure 21: OOPS! You forgot to upgrade the Hyperion report. See Data Conversion on page 6 of this guide. Click End to return to the Data Prep form, fix the spreadsheet and try importing it again. Program Seems to quot;Freezequot; If the hourglass doesn't change after about ten seconds, then the program probably can't find a linked table. Press and hold the Ctrl key while pressing the Pause/Break key on the keyboard. You should get an error message. Click End to return to the Data Prep form. Go to the shared drive and make sure you can find CXCommon.mdb in the same directory as EADDR Stats Generator.mdb. If it is missing, copy it from your hard drive. Test the links by trying to open the FTax Manager form. If you get an error at this point, it will actually tell you where it was looking for the table. Otherwise, close the FTax form and import your Hyperion spreadsheet. Corp Stats Missing Assuming you have not disabled that corp's FTax group, the only other reason a corp would be missing is if it were not present in the Hyperion report! It's not necessary to redo all other corps. Use the output to update the statistics. Then start over from Data Source on page 1 of this Guide. This time, just select the missing corp(s). What's FTax Manager? This undocumented utility allows you to create, enable and disable groups of FTax areas within a single corp. If you take a peek inside, you'll see where it used to have smaller statistical groupings enabled. The utility has some instructions, just be careful! 11

Add a comment

Related presentations

Related pages

Privacy-Aware Role Based Access Control | Alberto ...

Privacy-aware Role Based Access ... Similarly, the following two permission assignments: PA 9 : (MKE, ((RD, EAddr ... Our P-RBAC synthetic data generator ...
Read more

Superfit Combinational Elusive Bug Detection (PDF Download ...

SUPERFIT COMBINATIONAL ELUSIVE BUG DETECTION R ... alternative "domain generator" plug-ins ... #Gender =2 #Name= 5 #Occup. =5 #Religion =5 #eaddr =5
Read more

Patent US5530842 - Generic backplane system which is ...

... information necessary for precise network statistics ... EADDR<18:6> represent the ... using runtime code generator and ...
Read more

Patent US6134676 - Programmable hardware event monitoring ...

IBM Technical Disclosure Bulletin entitled RISC Superscalar Pipeline Out-of-Order Statistics Gathering ... and final report generators, ... EADDR) The ...
Read more

Unikernels: HTTP -> HTTPS - MirageOS

This post gives a bit of background on the Random Number Generator ... statistics and OS ... distributed clusters of unikernels that cooperate to ...
Read more

OpenCores

Statistics; Newsletters; Available jobs; Magazines; Partners. Plunify; ... return str;} static char * eaddr (char * str, unsigned char * addr, int size ...
Read more

github.com

- Moving to new structure similar to the standard Arduino Ethernet library (Also using UIPEthernet as a reference) - Currently the library only directly ...
Read more

The uIP Embedded TCP/IP Stack The uIP 1.0 Reference Manual

The uIP Embedded TCP/IP Stack The uIP 1.0 Reference Manual on ResearchGate, the professional network for scientists.
Read more