DIY Samsung Galaxy S4 Wireless Charging Under $30

60 %
40 %
Information about DIY Samsung Galaxy S4 Wireless Charging Under $30
Technology

Published on February 4, 2014

Author: gwoodguy

Source: slideshare.net

Description

In this presentation I show you how to hook up your Samsung Galaxy S4 with wireless charging for under $30. This is a step-by-step tutorial and includes all the parts needed to complete this mod. The parts can be found here: http://amzn.to/1bqp2Pr

DIY Samsung Galaxy S4 Wireless Charging for Under $30 hackintech1.wordpress.com /2013/07/30/diy-samsung-galaxy-s4-wireless-charging-f or-under-30/ If you have ever looked at buying a wireless charger for your Galaxy S4 then you know that they are pretty expensive. They normally cost about $80- $90. Why pay that much when you can do it yourself? I’m going to show you an easy way to do exactly that. First there are a few things you will need before you get started: Palm Pixi Touchstone back cover Palm Pre charging cable Palm Touchstone charging dock Copper tape (2 pieces 2 1/4 in. long, 2 pieces 3/4 in. long) Tools needed: Thin knife Tape (clear or similar) Sticky note or small piece of paper Pen Multimeter (optional) So let’s get started, I will post mostly pictures and explain what and how to do it in the picture/video.This is the Galaxy S4 and the Palm Pixi case. Once we are done you will be able to charge your Galaxy S4 on charger the same way that the Pixi case is sitting on the charger.

1. The first step of this Frankenstein mod is to remove the white plastic cover. You should be able to peel it up with your fingernail or thin knife. **Be careful when peeling the white cover off the components behind it may try to come off with it.** Set that aside you may want it later. 2. Next remove the rib cage metal sheet, again be careful not to rip it or pull to fast. Set this aside, you will need this later. 3. Now grab your knife and rip the corpse’s guts out gently pry under the circuit board until it pops up. Then gently pry under the corpse’s backbone copper coil, it has a lot of glue on it so it may take some extra effort.

4. Now, take your knife and remove the limbs 4 magnets. The limbs magnets are secured in there really well so they will take more effort to remove. All of the Palm Pixi limbs/guts parts removed, ready for the Frankenstein mod

Tools/parts needed to make it come ALIVE! 5. Remove your Frankenstein’s Galaxy S4 rib cage back cover.

This where will connect the Tesla Coils Copper tape. This 6. Fold the ribbon of Palm Pixi just as I have in the picture. If you need help folding it, refer to the video I show exactly how to. 7. Position the corpse’s Palm pixi’s guts circuit and coil on the Frankenstein’s Galaxy S4′s body cavity backplate as shown. (try to center with the camera hole)

8. Take the metal sheet and place it over the coil leaving about 1/4 of the coil exposed at the top. Grab your template that you made on the sticky note and position your magnets. 9. Now stitch tape the guts/limbs components in place.

10. Take the paper off all four pieces of copper tape and fold one end over itself about 1/8 in. (example in the video) 11. Place the 2 1/4 in. pieces of copper tape on the backplate as seen, with the folded end touching the ribbon contact.

12. Grab your 3/4 in. pieces of copper tape and place them on the Galaxy S4 body as demonstrated below.

13. Get a pen and press the copper tape onto the contacts. Not to hard though, you don’t want to damage the contacts.

This is about how everything should look before you snap the backplate back on. At this point, if you like you can put the white over the magnets and coil to clean the look up. I left it just the way it is. 14. This step is optional, it requires a multimeter. If you have one, place the backplate on the plugged in touchstone charger. Put your leads on the 2 contacts on the backplate and it should read at least 5.5 volts. This means it is ALIVE working.

15. Replace the backplate, it should snap on easily with no problems. Now place it on the charger and you should get a pop- up message saying that you have placed your Galaxy S4 on a wireless charger. It’s ALIVE!!

I hope you enjoyed this post, please let me know what you think of it in the comment section. If you have any problems, first I would suggest to check the contact points on your copper tape and reposition as needed. If you have any further problems please let me know in the comments. About these ads Tags: , , , , , , , , , , , , , , , ,

Add a comment

Related presentations

Presentación que realice en el Evento Nacional de Gobierno Abierto, realizado los ...

In this presentation we will describe our experience developing with a highly dyna...

Presentation to the LITA Forum 7th November 2014 Albuquerque, NM

Un recorrido por los cambios que nos generará el wearabletech en el futuro

Um paralelo entre as novidades & mercado em Wearable Computing e Tecnologias Assis...

Microsoft finally joins the smartwatch and fitness tracker game by introducing the...

Related pages

DIY Samsung Galaxy S4 Wireless Charging under $30 - YouTube

In this video I show you how to make your Samsung Galaxy S4 charge wirelessly for under $30. All you need are a few items and a few tools. This ...
Read more

DIY Samsung Galaxy S4 Wireless Charging for Under $30 ...

I applied the same hack on a Samsung S3MINI with success. However, the S3MINI has no special input for wireless charging. So I have connected ...
Read more

DIY Samsung Galaxy S4 Wireless Charging under $30 - Watch ...

DIY Samsung Galaxy S4 Wireless Charging under $30 Watch Video Online In this video I show you how to make your Samsung Galaxy S4 charge wirelessly for ...
Read more

DIY Samsung Galaxy S4 Wireless Charging under $30 | Tune.pk

In this video I show you how to make your Samsung Galaxy S4 charge wirelessly for under $30. All you need are a few items and a few tools. This is pretty ...
Read more

Diy sumsung galaxy s4 - YouTube

Diy sumsung galaxy s4 ... DIY Samsung Galaxy S4 Wireless Charging under $30 ... easycap fpv diy goggles samsung galaxy s4 screen ...
Read more

Fast Charge Wireless Charging Pad, White - Electronics ...

The Fast Charge Wireless Charging Pad is ... Note5 and Galaxy S6 edge+ models. *Testing under ... Samsung handsets include Galaxy S4, ...
Read more

Super Simple 5 minutes Wireless Charging Mod for Samsung SG3

I folded under the final 1/8 ... Samsung Galaxy S3.Lay the ... Galaxy S III General Super Simple 5 minutes Wireless Charging Mod for ...
Read more

The official Samsung Galaxy S4 wireless charging kit ...

The Samsung Galaxy S4 doesn't include wireless ... The official Samsung Galaxy S4 wireless charging ... Very happy with the DIY wireless charging ...
Read more

Samsung Galaxy S4's wireless charging companions

Everything you need to know about the Samsung Wireless Charging ... Samsung Galaxy S4's wireless charging ... as CNET did with the Samsung Galaxy S3 ...
Read more

This easy hack adds wireless charging to Samsung Galaxy S3 ...

... and use them to add wireless charging to your Samsung Galaxy ... adds wireless charging to Samsung Galaxy S3. ... Samsung Galaxy S4 ...
Read more