Published on March 7, 2014
DIY the Quadcopter Are you dreaming about DIY a cool quadcopter by yourself one day?Today ICStation Team will share you the making steps with a lot of ultra-clear pictures. The quadcopter we introduce to you uses framework of 51MCU and all modules of system based on C8051F.The rack is made of electric straight liner and tube socket with hard disk slice.The motor uses 2212 KV930. The front and back side of propellers use German EPP1045. 1.Prepare two Hard Disk. These are two second-hand hard disk. 2.Install the base of electric straight liner
3.Prepare and install the main parts of engine body.
4.Use Desktop miniature bench drill to process rack. 5.Use the original propeller protector to fix these two EPP1045 propellers .
6.Weld Banana pin
7.Install and fix the motor
8.The whole structure of rack.
9.To modify the remote control FT06-C
Based on the cheap and big size FT06-C, add two ratio channel and LCD to display the relevant parameter.Leave the high frequency control head and replace whole PPM encoding board. 10.Cutting the board with the specialized knife.
11.Take down the original PPW board of FT06-C
12.Put one board in this place.
13.Add a 5110 LCD in this place of FT06-C
14.Weld the PPM control board 15.Successfully light the LCD 16.Look the whole effect after adding the LCD.
17.Install the potentiometer of the left and right side.
18.Wire the LCD and potentiometer
19.Look the tew added potentiometer. 20.Increase the height of potentiometer knob
21.Calibration the central point of the rocker in engineering mode. 22.Display valid values of PPM in front 6 channels when working.
23.The PPM waveforms of 8 channel displaying through the receiver 24.Flight testing in G3.5
Belief comes through hearing. In order to have belief, we must listen, but we also...
Presentation held at the Etsy Team Captain Summit in Berlin, March 14-16, 2014
Download hack tool @ http://dragoncity.cooldownloadz.com
An how-to build an inexpensive Arduino Board for 5 USD.
step by step guide on how small businesses can start payroll software in -mid-year.
CLC Trendspotting - The Technologies of Makerspaces, presented by Edward Iglesias ...
Intro: DIY Quadcopter with 51 MCU C8051F 2212 KV930 Motor German EPP1045. Are you dreaming about DIY a cool quadcopter by yourself one day?Today ICStation ...
... with 51 MCU C8051F 2212 KV930 Motor German EPP1045. ... com/id/DIY-Quadcopter-with-51-MCU-C8051F-2212-KV930 ... quadcopter we introduce to ...
DIY Quadcopter with 51 MCU C8051F 2212 KV930 Motor. DIY a cool quadcopter by ... these two EPP1045 ... with 51 MCU C8051F 2212 KV930 Motor", ...
Home > Project > DIY Quadcopter. DIY ... com/id/DIY-Quadcopter-with-51-MCU-C8051F-2212-KV930-Motor/ ... of propellers use German EPP1045. Full ...
Home > Project > DIY Quadcopter with 51 MCU C8051F 2212 KV930 Motor German EPP1045 By ICStation on November 12, 2015 Web site: Project Summary:
DIY a cool quadcopter by yourself ... DIY Quadcopter with 51 MCU C8051F 2212 KV930 Motor. icstation. ... DIY Temperature & Humidity & Smoke Detector Alarm .
How Simply Is It Done, San Pedro. 8 likes · 4 talking about this. Page where I documented my learnings in microcontrollers and microprocessors -...
DIY Quadcopter with 51 MCU C8051F 2212 KV930 ... Home > Project > DIY Quadcopter with 51 MCU C8051F 2212 KV930 Motor German EPP1045 By ... Projets futurs ...