CMM Report

50 %
50 %
Information about CMM Report
Technology

Published on February 25, 2009

Author: KBW1.0

Source: slideshare.net

Description

Actual QC report generated for customer.

============================================================================================== Don'tLyouEwish your parts P S O 4.2.06 giving you inspection data like this. I S S / C A L Y supplier was CAR Z Compact printout ---------------------------------------------------------------------------------------------- Measurement Plan Operator Date Incremental Part Number Removed UM25 Base Nozzle Full 1071Master February 17, 200965 CONT_G2 ---------------------------------------------------------------------------------------------- Names Description Actual Nominal Utol Ltol Deviat. Histogr. ============================================================================================== ______________________________________________________________________________________________ #1____________40 Deg #2____________.048-.046 Dia #3____________.295 Distance #4____________.254 Depth #5____________.470 Depth #16___________.118 Slot #20___________.059 Slot #21___________.770 Depth #26___________.089X .065-.045 Deep #39___________.005-.009 60Deg Slit #44___________16 Finish #50___________.665Distance #51___________.015 Distance #52___________.033 Distance #53___________.907 Distance #54___________.015 Depth #55___________.010-.004 Land #65___________.015-.005 Edge Break #6 .327 O-Ring D 0.32812 0.32700 0.00200 -0.00200 0.00112 |--- #7 .022 24 Drg. Hole CartDist 0.02204 0.02200 0.00300 -0.00300 0.00004 |- #8 24 Drg A 23.86026 24.00000 0.50000 -0.50000 -0.13974 --| #9 .173 O-Ring D 0.17172 0.17300 0.00200 -0.00200 -0.00128 ---| 45 Drg 3 A 44.95935 45.00000 0.50000 -0.50000 -0.04065 -| 45 Drg 4 A 45.03508 45.00000 0.50000 -0.50000 0.03508 |- #10 O-Ring Depth .062 CartDist 0.06251 0.06200 0.00100 -0.00100 0.00051 |--- #11 24 Drg .063 D 0.06272 0.06200 0.00200 -0.00200 0.00072 |-- #12 Upper 7 Drg .063 D 0.06355 0.06200 0.00300 -0.00300 0.00155 |--- #12 Lower 7 Drg .063 D 0.06355 0.06200 0.00300 -0.00300 0.00155 |--- #13 .300 CartDist 0.29994 0.30000 0.00500 -0.00500 -0.00006 -| #14 .150 Slot Position CartDist 0.14795 0.15000 0.00500 -0.00500 -0.00205 --| #15 .211 Lower Slot CartDist 0.21258 0.21100 0.00500 -0.00500 0.00158 |-- #15 .211 2 CartDist 0.21280 0.21100 0.00500 -0.00500 0.00180 |-- #17 .150 Z 0.14912 0.15000 0.00500 -0.00500 -0.00088 -| #17.5 .300 7 drg Hole CartDist 0.29930 0.30000 0.00500 -0.00500 -0.00070 -| #18 .209 7 Drg. Hole CartDist 0.20912 0.20900 0.00300 -0.00300 0.00012 |- #19 7 Drg lower A 7.08139 7.00000 0.50000 -0.50000 0.08139 |- #19 7 Drg Upper A 7.10947 7.00000 0.50000 -0.50000 0.10947 |- #22 .700 CartDist 0.70011 0.70000 0.00500 -0.00500 0.00011 |- #23 .350 CartDist 0.34852 0.35000 0.00500 -0.00500 -0.00148 --| #24 .063 Dista~e Apart 1 CartDist 0.29964 0.30000 0.00200 -0.00200 -0.00036 -| #24 .063 Dista~e Apart 2 CartDist 0.29959 0.30000 0.00200 -0.00200 -0.00041 -| #25 .150 CartDist 0.14958 0.15000 0.00500 -0.00500 -0.00042 -| #26 .089 Hole D 0.08936 0.08900 0.00500 -0.00500 0.00036 |- #27 .063 D 0.06368 0.06300 0.00500 -0.00500 0.00068 |- #28 .0790 Y 0.07931 0.07900 0.00500 -0.00500 0.00031 |- #29 .063 Upper Y 0.08998 0.09100 0.00500 -0.00500 -0.00102 -| #29 .063 Lower Y 0.09030 0.09100 0.00500 -0.00500 -0.00070 -| #30 .157 Lower Y 0.15670 0.15700 0.00500 -0.00500 -0.00030 -| #30 .157 Upper Y 0.15669 0.15700 0.00500 -0.00500 -0.00031 -| #31 .295 Slot CartDist 0.29640 0.29504 0.00500 -0.00500 0.00136 |-- #32 .433 CartDist 0.43410 0.43300 0.00500 -0.00500 0.00110 |- #33 Upper .128 Hole D 0.12870 0.12800 0.00200 -0.00200 0.00070 |-- #33 Lower .128 Hole D 0.12867 0.12800 0.00200 -0.00200 0.00067 |-- #33 Upper CB Depth .118 CartDist 0.11875 0.11800 0.00500 -0.00500 0.00075 |- #33 Lower CB Depth .118 CartDist 0.12052 0.11800 0.00500 -0.00500 0.00252 |--- #33 .240 Upper D 0.23926 0.24000 0.00500 -0.00500 -0.00074 -| #33 .240 Lower D 0.23914 0.24000 0.00500 -0.00500 -0.00086 -| #34 Lower .063 Hole D 0.06354 0.06200 0.00300 -0.00300 0.00154 |--- #34 Upper .063 Hole D 0.06348 0.06200 0.00300 -0.00300 0.00148 |-- #35 .408 Z 0.40904 0.40800 0.00500 -0.00500 0.00104 |- #36 816 CartDist 0.81691 0.81600 0.00500 -0.00500 0.00091 |- #37 .918 CartDist 0.91698 0.91800 0.00500 -0.00500 -0.00102 -|

Add a comment

Related presentations

Related pages

First Article and CMM Inspection Reports

First Article and CMM Inspection Reports Click the images below for an enlarged view. ... CMM Reports : Adobe Acrobat Reader is needed to view this file.
Read more

CMM Report | Products & Suppliers | IHS Engineering360

Find CMM Report related suppliers, manufacturers, products and specifications on GlobalSpec - a trusted source of CMM Report information.
Read more

Capability Maturity Model – Wikipedia

Die Varianten des CMU CMM wurden Ende 2003 durch Capability Maturity Model Integration (kurz CMMI) ergänzt, um dem Wildwuchs der CM-Modelle ...
Read more

Capability Maturity Model - Wikipedia, the free encyclopedia

The Capability Maturity Model (CMM) [1] ... The Capability Maturity Model was originally developed as a tool ... It was later published in a report in ...
Read more

Revised, June 27, 2001 CMM: REPORTS FROM USERS

Revised, June 27, 2001 CMM: REPORTS FROM USERS In 2000, Western Communication Association President Sandra Petronio invited me to organize a session on CMM ...
Read more

CMM Inspection Reports « Coordinate Measuring Machine ...

TouchDMIS offers a choice of Inspection Report all dynamically linked to the core of TouchDMIS allowing real-time reporting. The heart of TouchDMIS is ...
Read more

CMM Help: Reports -- powered by CBORD - cmm.gfs.com

In the Reports section of the CMM Home page, select the choice Service Reports. Choose one of the available report types: Pre-Service Reports:
Read more

CMM report - PC-DMIS User Forum

Hello Everyone, I have a quesiton about the CMM report that I do not know what is the mean of "AX"? The AX can be found at the top left of the CMM report.
Read more

CMM Inspection Report - Weber Manufacturing Technologies Inc.

CMM Inspection Report Date:……………… ... Nominal values created by CMM department from math data. Inspector Signature:_____ Approved By ...
Read more

Interpeting CMM Calibration Reports - PC-DMIS User Forum

Hello I would like to add a disclaimer to the logo.dat file to display at the top of all CMM reports the accuracy/ uncertanty of the measurements taken by ...
Read more