Circontrol Circarlife Catalogue 2013 2014 - EV Charging Stations

50 %
50 %
Information about Circontrol Circarlife Catalogue 2013 2014 - EV Charging Stations
Technology

Published on February 13, 2014

Author: moir19

Source: slideshare.net

Description

EV charging stations product catalogue

CirCarLife - Catalogue 2013-2014 INDEX E INTELLIGENT RECHARGING SOLUTIONS FOR ELECTRIC VEHICLES E1 INTRODUCTION 5 E1.1 CHARGING MODES 5 E1.2 CONNECTOR TYPES 6 E2 WALLBOX SMART CHARGING SYSTEM FOR CAR PARKS AND COMMUNAL BLOCKS 7 E2.1 BASIC SERIES 8 E2.2 SMART SERIES 10 E3 POST CHARGING SYSTEM FOR CITY STREETS AND INTER-CITY ROADS 12 E3.1 BASIC CHARGING POSTS 13 E3.2 POST URBAN SMART SERIES 15 E3.3 SMART CHARGING POSTS SERIES 17 E3.4 TWO WHEELS VEHICLE CHARGING SYSTEM 19 E4 MULTIPOINT SYSTEM 21 E4.1 MASTER CONTROLLER 22 E4.2 SLAVE WALLBOX 24 E5 QUICK CHARGING SYSTEM 26 E5.1 QUICK CHARGING ADVANCE SYSTEM 27 E5.2 QUICK CHARGING COMPACT SYSTEM 29 E5.3 QUICK CHARGING COMBO 2 CCS SYSTEM 31 E6 MANAGEMENT AND CONTROL SOFTWARE 33 E7 ACCESSORIES 34 E7.1 SMART STANDALONE DATA CENTRALISING UNIT 34 E7.2 COMMUNICATION ACCESSORIES 35 E7.3 PRE-PAYMENT SOLUTIONS 36 E8 TECHNICAL FEATURES 37

1 4 ULTRA-FAST CHARGING SYSTEM ELECTRIC VEHICLE CHARGING IN CITY STREETS ELECTRIC VEHICLE CHARGING IN PUBLIC CAR PARKS (INDOORS) ELECTRIC VEHICLE CHARGING IN CAR PARKS (OUTDOORS) ELECTRIC VEHICLE CHARGING IN COMMUNAL BLOCKS

CIRCONTROL - CirCarLife CirCarLife Intelligent recharging solutions for electric vehicles E1 INTRODUCTION E1.1 CHARGING MODES The EV charging process is regulated by the IEC 61851 and IEC 62196 international standards. These standards define the different charging modes and the type of connection required to charge EVs. All CirCarlife products have been created and designed in compliance with the strictest European regulations and standards, prioritising the end user’s safety. CIRCONTROL is a leading and constantly innovating company committed to developing its products and adapting them to market requirements. Mode 1 Technical features Standard electrical network connector, non-specific for EVs. Slow AC charging. 1 The installation must be protected with circuit breakers and earth leakage protection elements. Maximum 16 A per phase (3.7 kW - 11kW). Mode 2 Technical features 5 Standard electrical network connector, non-specific for EVs. Slow AC charging. The installation must be protected with circuit breakers and earth leakage protection elements. Maximum 32 A per phase (3.4 kW - 22kW). Special cable with an intermediate electronic device, with a control and protection pilot function. Mode 3 Technical features Electrical network connector, specific for EVs. Slow or semi-fast charging in single or three-phase installations. Protection elements included in the special infrastructure for EVs. Maximum 64 A per phase (14.8 kW - 43 kW). Direct connection of the EV to the charging unit. Mode 4 Technical features Electrical network connector, specific for EVs. Quick DC charging. Charging station, exclusively used for EVs. Maximum 400 A per phase (50 kW - 150 kW). Control and protection elements installed in the infrastructure. .Catalogue 2013-2014

CIRCONTROL - CirCarLife E1.2 TYPES OF CONNECTORS Type 1 SAE J1772 Regulation. 5 pins (L1/N, PE, CP, CS). Maximum 230Vac 32A single-phase (7.3kW). Type 2 1 7 pins (L1, L2, L3, N, PE, CP, PP). Maximum 400Vac 63A three-phase (43kW). 6 Type 3 7 pins (L1, L2, L3, N, PE, CP, PP). Maximum 400Vac 32A three-phase (21kW). ChaDeMo Indirect connection between the EV and DC supply point. Control and protection elements installed in the infrastructure. Combined Charging System DC connector of the combined AC/DC plug-in charging system: The inlet of the plug-in connector can also be used for AC voltage charging with a type 2 AC plug. One inlet is required on the vehicle side for AC and DC charging. .Catalogue 2013-2014

CIRCONTROL - CirCarLife CirCarLife Intelligent recharging solutions for electric vehicles E2. WALLBOX CHARGING SYSTEM FOR CAR PARKS AND COMMUNAL BLOCKS Description Different types of car parks have different electric vehicle charging features and requirements. That is why different electric vehicle charging equipment solutions are required for each type of installation. Circontrol offers a variety of different solutions, adapted to each type of car park, whether in single-family homes, communal residence car parks, public and shopping mall car parks, hotels, etc. These solutions consist of devices that can function standalone and devices with communication ability which enable specific functions via software adapted to each type of installation. 2 Product Range - WallBox charging 7 BASIC Series Charge Status Light Indicator BASIC SMART Series RFID Communication - - Metering - SMART .Catalogue 2013-2014

CIRCONTROL - CirCarLife E2.1 BASIC SERIES WallBox charging system for domestic use Description The Wall Box Basic has been specially designed for domestic use on indoor or outdoor residential garages. Compatible with all hybrid plug in or pure electric cars with an easy installation ondo your garage wall. Capable to charge complying with safety regulations your electric car during overnight meanwhile your family sleep and be ready for your next day journey. With the auto start mode 3 system and with the three light colour indicators located in the wall box you can easily charge and monitor your electrical vehicle charge. 2 Technical features Self-extinguishing ABS plastic casing. Protection degree : IP54. Compatible with Mode 3 IEC 61851-1. (Certified). Type I, Type II, Type III or Schuko connectors, in compliance with the IEC 8 Type I support, cable and connector. Simple installation, 4-point wall fixing. Self-extinguishing ABS plastic casing. Charge status light indicator (blue, green and red). Customized paint housing and logos. .Catalogue 2013-2014

CIRCONTROL - CirCarLife Technical Features Output Power Output Current Charge system Input Supply Voltage Socket A Socket B Socket A Socket B Socket A Socket B 1 230 Vac 3,6 kW - 16 A - Mode 3 & Type 1 - 38 1 Type Num. Sockets Technical Features Page 230 Vac 7,2 kW - 32 A - Mode 3 & Type 1 - 39 CCL-WBC CCL-WBC 32 CCL-WB MIX 2 2 230 Vac/400Vac* 3,6kW 7,2 kW / 21 kW 16 A 32 A Mode 3 & Type 2 Mode 1 Schuko 40 9 CCL-WBM 1 230 Vac/400Vac* 7,2 kW/21kW* - 32 A - Mode 3 & Type 2 - 41 1 230 Vac/400Vac* 7,2 kW/21kW* - 32 A - Mode 3 & Type 2 - 42 CCL-WBMC * Depends of local instalation WB accepts both Unit dimensions and cable support 109mm 225mm 320mm WALLBOX CHARGING 51mm 125mm CONNECTION CABLE SUPPORT INCLUDED ONLY WBC SERIES .Catalogue 2013-2014

CIRCONTROL - CirCarLife E2.2 SMART SERIES WallBox charging system for car parks and communal blocks Description The Wall Box smart was specially designed for public indooroutdoor car park installations as well as multi-family homes, shopping malls, municipalities, private companies, etc. These series provide multiple power options and meet all vehicles standards to charge whole hybrid plug in and pure electrical vehicles existing in the market. The station incorporates display, RFID (card reader), smart metering and communication capabilities to be adapted in an innovative smart grid systems. 2 Technical feature Protection degree : IP54. Compatible with Mode 3 IEC 61851-1. (Certified). Type I, Type II, Type III or Schuko connectors, in compliance with the IEC 10 Charge status light indicator (blue, green and red). Simple installation, 4-point wall fixing. Self-extinguishing ABS plastic casing. Type I support, cable and connector. Type 2 connector lock. Customised color housing and logos. Backlight LCD display. Integrated energy measurement (Class 1 meter). Pre-payment and access control with RFID cards. Ethernet communications and data storage. 3G and GPRS communications (optional). SCADA control software connection. Integration with other software (OCPP, XML, ...). Unit dimensions and cable support 109 mm 225 mm 320 mm 51 mm WALLBOX CHARGING .Catalogue 2013-2014 125 mm CONNECTION CABLE SUPPORT INCLUDED ONLY WBC SERIES

CIRCONTROL - CirCarLife Technical Features Output Power Output Current Charge system Num. Sockets Input Supply Voltage Socket A Socket B Socket A Socket B Socket A Socket B Technical Features Page 1 230 Vac 3,6 kW _ 16 A _ Mode 3 Type 1 _ 43 1 230 Vac 7,2 kW _ 32 A _ Mode 3 Type 1 _ 44 1 CCL-WBC SMART 230 Vac 7,2 kW _ 32 A _ Mode 3 Type 2 _ 45 CCL-WBC SMART CCL-WBC 32 SMART CCL-WBM SMART 2 CCL-WBS SMART 1 230 Vac 3,6 kW _ 16 A _ Mode 1 Shucko _ 46 11 CCL-WB MIX SMART 2 230 Vac 7,2 kW 3,6 kW 32 A 16 A Mode 3 Type 2 Mode 1 Shucko 47 2 230 Vac 7,2 kW 7,2 kW 32 A 32 A Mode 3 Type 2 Mode 3 Type 2 48 1 400 Vac 22 kW _ 32 A _ Mode 3 Type 2 _ 49 2 400 Vac 22 kW 3,6 kW 32 A 16 A Mode 3 Type 2 Mode 1 Shucko 50 2 400 Vac 22 kW 22 kW 32 A 32 A Mode 3 Type 2 Mode 3 Type 2 51 CCL-WB2M SMART CCL-WBM SMART TRI CCL-WB MIX SMART TRI CCL-WB2M SMART TRI .Catalogue 2013-2014

CirCarLife CirCarLife Intelligent recharging solutions for electric vehicles E3. CHARGING SYSTEMS FOR CITY STREETS AND INTER-CITY ROADS Description Charging systems for city streets require very specific features, especially in terms of robustness, through being exposed to variable environmental conditions, including acts of vandalism. Besides the- se special requirements, they should also have the adequate electric safety measures for equipment with characteristics such as these. With this in mind, circontrol provides innovative smart charging so- lutions that are adapted to the special conditions of city streets for all sorts of two and four-wheel vehicles, according to the latest in- ternational charging regulations and offering a variety of solutions for each type of installation. 3 Product Range - POST charging 12 BASIC Series SMART URBAN Series RFID BASIC SERIES SMART Series Display for credit monitoring Communication 2-WHEELVEHICLES Series Mode 3 Socket - SMART URBAN SERIES SMART SERIES 2-WHEEL VEHICLES SERIES .Catalogue 2013-2014 -

CIRCONTROL - CirCarLife E3.1 POST BASIC SERIES Charging systems for city streets and intercity roads Description The vehicle recharge posts of the CirCarLife family of products, has been designed to fit all needs in electrical vehicles recharge on the street, compliant with all electrical security regulations as well as access security and metering and consumption management. The robustness for its use and against vandalism is one of the aspects taken in account when designing and developing this equipment, as well as fit them with a temperate and smart aesthetic design. All family CirCarLife range of products has been thought to give the electrical vehicle user, a simple method for recharge his vehicle everywhere he parks it, that way the recharging posts has been equipped with a simple access system and energy payment through contactless cards, as well as a handy and easy opening and closing system, that way all the recharge process could be fulfilled with only a few steps by any user without technical knowledge needs. 3 Aplications All outdoor places or these that could be used for any kind of vehicle parking (cars, motorcycles, bikes, transport, cleaning, …). An example of this could be public street, public outdoor car parks, outdoor car parks on big malls, airports, car rental companies, cleaning companies, etc. 13 Features • Access and prepayment with proximity cards (RFID) Technical features Backlight display, indicating the available credit • Safety user protection for voltage danger (EU regulation) Circular stainless steel housing • Intelligent and anti-vandalism opening system Protection degree : IP54 and anti-graffiti paint • Integrated energy measurement (kWh) Type of Connector: Schuko • Protection system against energy fraud RFID Identification and pre-payment • Integrated electrical protections with self reclosing system Self-resetting circuit breaker and earth leakage protection • Display for credit monitoring Remote control and monitoring of the unit Built-in energy metering system Connected to SCADA control software Remote control and monitoring of the unit Built-in energy metering system • Ready for outdoor use (IP54) • Coated with anti-graffiti paint • Anti-vandalism stainless steel body • Smart aesthetic design • Communications (optional) Current socket lock with mobile head .Catalogue 2013-2014

CIRCONTROL - CirCarLife Unit dimensions Technical features Output Power Output Current Charge system Num. Sockets Input Supply Voltage Socket A Socket B Socket A Socket B Socket A Socket B 1 3 230 Vac 3,6 kW _ 16 A _ Mode 1 Shucko 2 230 Vac 3,6 kW 3,6 kW 16 A 16 A 2 230 Vac 3,6 kW 3,6 kW 16 A 2 Type Network Connection Technical Features Page _ RS-485 52 Mode 1 Shucko Mode 1 Shucko RS-485 53 16 A Mode 1 Shucko Mode 1 Shucko RS-485 Ethernet 54 230 Vac 3,6 kW 3,6 kW 16 A 16 A Mode 1 Shucko Mode 1 Shucko RS-485 Ethernet 3G 55 CCL-PE1 COM 14 CCL-PE2 COM CCL-PE2 IP CCL-PE2 MOV .Catalogue 2013-2014

CIRCONTROL - CirCarLife E.3.2 POST URBAN SERIES Charging systems for city streets and intercity roads Description The new Urban Post series, are being launched by Circontrol to be installed on streets and intercity streets for two and fourwheel electrical vehicles. Due to this, Urban Post meets the máximum protection level against vandalism at EU (IK10) and its enclosure allow to work at extrem temperatures and raining places. Improving the life lenght of the electrical charger. As this is a product designed to be used by different users at many countries around the world, it is compatible with XML & OCPP protocol and also with the most relevant existing back offices. This product has already tested and certified with the most relevant European and Japanese car manufacturers, with great results in terms of efficiency and reliability. Following the philosophy of Circontrol, Urban Post can be customize by software and brand labelling for relevant orders or new distributors. General features Instructions on the screen in several languages 3 Network connection Ethernet and 3G (optional) Status light indicator User ID by RFID card, and mobile payment (App, etc.) Possibility to use front panel for publicity 15 Dimensions: 940 mm x 450 mm x 195 mm Technical features Two sockets available at same time (one socket by side) Power range by socket at 230 V 3,6 kW up to 7,2 kW Power range by socket at 400 V 11 kW up to 22 kW Enclosure rating: IP 54 / IK 10 (stainless steel housing) Compatible with Mode 3 IEC 61851-1 (Certified) Operating temperature: -30°C to + 45°C 944,95 mm Unit dimensions 166,94 mm 450 mm .Catalogue 2013-2014

CIRCONTROL - CirCarLife Technical features Output Power Output Current Charge system Num. Sockets Input Supply Voltage Socket A Socket B Socket A Socket B Socket A Socket B 2 230 Vac 3,6 kW 3,6 kW 16 A 16 A Mode 3 Type 2 2 Type Network Connection Technical Features Page Mode 3 Type 2 Ethernet & 3G (Optional) 56 230 Vac 3,6 kW 3,6 kW 16 A 16 A Mode 3 Type 2 Mode 1 Shucko Ethernet & 3G (Optional) 57 Mode 3 Type 2 (Socket A) Mode 3 Type 2 (Socket B) Mode 1 & Mode Shucko (Socket A1) Mode 1 & Mode Shucko (Socket B1) Ethernet & 3G (Optional) 58 CCL-PM3-Urban CCL-PM-MIX-Urban 3 CCL-PM-MIX4Urban 4 7,2kW (Socket A) 3.6kW (Socket A1) 7,2kW (Socket B) 3.6kW (Socket B1) 32A (Socket A) 16A (Socket A1) 32A (Socket B) 16A (Socket B1) 2 400 Vac 22 kW 22 kW 32 A 32 A Mode 3 Type 2 Mode 3 Type 2 Ethernet & 3G (Optional) 59 2 16 230 Vac 400 Vac 22 kW 3,6 kW 32 A 16 A Mode 3 Type 2 Mode 1 & Mode Shucko Ethernet & 3G (Optional) 60 Mode 3 Type 2 (Socket A) Mode 3 Type 2 (Socket B) Mode 1 & Mode Shucko (Socket A1) Mode 1 & Mode Shucko (Socket B1) Ethernet & 3G (Optional) 61 CCL-PT3-Urban CCL-PT-MIX-Urban CCL-PT-MIX4-Urban 4 .Catalogue 2013-2014 400 Vac 22kW (Socket A) 3.6kW (Socket A1) 22kW (Socket B) 3.6kW (Socket B1) 32A (Socket A) 16A (Socket A1) 32A (Socket B) 16A (Socket B1)

CIRCONTROL - CirCarLife E3.3 POST SMART SERIES Charging systems for city streets and intercity roads Description Smart post series provides a durable and modular enclosure with the robustness necessary to support hard climatic conditions along the streets. Equipped with latest technology in terms of communication and safety devices allows charge electrical vehicle in a easy and protected way. With an easy and friendly use driver will experience the best way to charge a electrical vehicle Includes advanced communication capabilities to monitor and setup remotely as well as RFID reader. 3 Technical features Backlight LCD display Kwh consumption in real time 17 Indicators: “Available”, “Reserved”, “Not available” Instructions for use displayed on the screen User ID Compatible with Mode 3 IEC 61851-1 (Certified) Type I, Type II or Schuko connectors, in compliance with the IEC 62196-2 regulations Unit Dimensions 280 mm 1590 mm 380 mm .Catalogue 2013-2014

CIRCONTROL - CirCarLife Technical features Output Power Output Current Charge system Input Supply Voltage Socket A Socket B Socket A Socket B 2 230 Vac 3,6 kW 3,6 kW 16 A 16 A Mode 1 Shucko Mode 1 Shucko Ethernet & 3G (Optional) 62 2 230 Vac 7,3 kW 7,3 kW 32 A 32 A Mode 3 Type 2 Mode 3 Type 2 Ethernet & 3G (Optional) 63 2 230 Vac 7,3 kW 3,6 kW 32 A 16 A Mode 3 Type 2 Mode 1 Shucko Ethernet & 3G (Optional) 64 2 400 Vac 22 kW 21 kW 32 A 32 A Mode 3 Type 2 Mode 3 Type 2 Ethernet & 3G (Optional) 65 2 400 Vac 22 kW 3,6 kW 32 A 16 A Mode 3 Type 2 Mode 1 Shucko Ethernet & 3G (Optional) 66 1 Type Num. Sockets 400 Vac 43 kW Mode 3 Type 2 _ Ethernet & 3G (Optional) 67 Socket A Socket B Network Connection Technical Features Page CCL-PM1 CCL-PM3 3 CCL-PM-MIX 18 CCL-PT3 CCL-PT-MIX CCL-PT3 63 .Catalogue 2013-2014 _ 63 A _

CIRCONTROL - CirCarLife E3.4 2-WHEEL SERIES Charging systems for city streets and intercity roads Description The 2 wheel vehicle recharging solution of the CirCarLife family has been designed to cover up the needs of 2 wheel electrical vehicles like motorcycles or electrical bikes, compliant with all electrical security regulations as well as access security and metering and consumption management. This solution consists of a controller that manages prepayment through RFID proximity cards and allows the outlet selection and manages the consumption en each outlet. Furthermore this solution integrates security systems to fit users and electrical vehicles. Joint to the controller there is a bracket with all electricity outlets for different kinds of 2 wheel vehicles, each outlet is separate from the others in a specific distance that allows parking the vehicle for recharging purposes in a comfortable way. The robustness for its use and against vandalism as well as installation and use facilities is one of the aspects taken in account when designing and developing this equipment. Furthermore this equipment emphasizes for its compact design with high technological level integrated. All family CirCarLife range of products has been thought to give the electrical vehicle user, a simple method for recharge his vehicle everywhere he parks it, that way, the recharging boxes has been equipped with a simple access system and energy payment through contactless cards, that way all the recharge process could be fulfilled with only a few steps by any user without technical knowledge needs. Technical features Features • Access and prepayment with proximity cards (RFID) • Safety user protection for voltage danger (EU regulation) • Intelligent and anti-vandalism opening system • Integrated energy measurement (Kwh) 19 • Protection system against energy fraud • Integrated electrical protections with self reclosing system • Display for credit monitoring • Ready for outdoor use (IP54) • Coated with anti-graffiti paint • Anti-vandalism stainless steel body • Smart aesthetic design Vandal-proof metallic casing • Communications (optional) Protection degree : IP54 • Push buttons for selection Energy meter RFID Identification and pre-payment Backlight display with an indicator of the available credit Selection push-buttons, with status indicator Circuit breaker and earth leakage protection 3 Aplications The recharge stations for two wheel vehicles has been designed to be installed on public street or in dedicated parks for motorbikes or bikes, its special design makes it ideal to fit any installation place where any 2 wheel vehicle can park. Communications: Ethernet and RS-485, 3G (optional) Charging data storage .Catalogue 2013-2014

CIRCONTROL - CirCarLife Technical features Num. Sockets Input Supply Voltage Maximum consumition per outlet Maximum output current Charge system Technical Features Page 3 230 Vac 9,2 kW 16A Mode 1 Shucko 68 6 Type 230 Vac 9,2 kW 16A Mode 1 Shucko 68 CCL-CB3 IP CCL-CB6 IP 3 20 .Catalogue 2013-2014

CIRCONTROL - CirCarLife CirCarLife Intelligent recharging solutions for electric vehicles E4. MULTIPOINT SYSTEM Description The multi-point system of the CirCarLife range has been designed to offer a smart electric vehicle charging solution for car parks with multiple outlet sockets for electrical vehicles. This solution allows smart electric vehicle charging management of a large number of electric vehicles, controlling different parameters of the electric network and the vehicles connected to it, as well as user and car park manager preferences. In this way, users can get maximum results from vehicle charging in accordance with user requirements by charging under the most favourable conditions in terms of electricity tariffs or by opting for immediate charging. COMMUNICATIONS RS, Ethernet, Zigbee, PLC, GSM, GPRS SAVING AND FILTERING 4 CONTROLLER Series Harmonics Filtering Reactive Compensation ENERGY MANAGEMENT Measurement Quality Consumption Adapt to electrical tariff Control of Recharges 21 ELECTRIC COMPANY SIGNAL PC SOFTWARE Real Time Multiuser Graphics Remote Connection Web XNL interface Alarm’s Management Historical Generation Multiplatform Communication Serial RS-485 Ethernet IDENTIFICATION RFID Bar Code Magnetic Stripe INTEGRATION WITH OTHER SYSTEMS Payment Systems Ocupation and guidance Lighting Pay and display 1 2 3 4 3rd system interface (...) Sockets Series .Catalogue 2013-2014

CIRCONTROL - CirCarLife E4.1 Master controller Description MULTIPOINT SYSTEM has been designed as an extremely flexible system. Its special configuration can cater for specific vehicle charging needs of the current market. In addition, it is a scalable system that can control up to 32 charging stations in its most basic configuration. The system is composed of the following basic units: • CCL-CM: CPU (industrial PC with PowerStudio software), 10” Touch Screen • CCL-SL Charging Station 4 CCL-CM offers the following functions 22 • User interface 10” Touch screen as standard. This is the natural complement of the PowerStudio software, which allows interaction with the user. PowerStudio software, is capable of efficiently managing the power available, controlling the main’s harmonics (upper measurement system is needed), charging vehicles in off-peak periods, etc. • The user can browse through the screens that have been designed with ergonomics in mind to select the parking place, check their charging status, , energy consumed., etc. CCL-SL Charging Station offers • The CCL-SL Charging Station it’s a wall-mount charging box that guarantees a safe collection of the energy for the energy of the installation operator, prevents fraud and misuse of the energy. • Also provide reliable measurement system for the user, since only the energy consumed is paid, with an accurate reading of the energy consumed. • Protects end users against electrical risks. Current is only present during the charging cycle. • Massive storage for all statistical studies. • All of the current communications power used nowadays (ICT). • Modbus Communications Protocol to communicate with the charging bases or other specific Energy Efficiency devices. • XML Communications Protocol, which enables the integration with other automated parking and car park systems (blue parking areas, car parks in general, access control points, etc.). In addition, it offers remote station management options to parking operators like statistics, remote activation/ deactivation, etc. • Current antitheft prevention function. The operation is interrupted if the socket is removed during the charging process, so that no more energy will be supplied to the base until the user is identified again. • In the event of an overload, the maximum current detection and limiting system is activated before the protection circuit breaker is tripped, in order to prevent subsequent maintenance operations. • Card reader. Built-in prepayment card reader Mifare type as standard, but it can be replaced or complemented with any other reader available in the market. The complementary units that offer all other features to the system are as follows: - Pre-payment cards. Available without credits (paid at a later stage) and pre-charged with 5, 20, 50 or 99 credits. - Pre-payment cards recharging tools. There are three models available for the recharging of the CirCarLife cards: o CCL-Cash: Cashier for the recharging of prepayment cards, able of accepting credit cards and notes. o CCL-Term: standalone terminal for recharging cards. o CCL-Soft: Software and USB peripheral reader for recharging cards. .Catalogue 2013-2014

CIRCONTROL - CirCarLife More options and accessories • Upper measurement systems used to control the power available to the installation. The energy available can be limited, bypassed or distributed to the different vehicles connected to the main. To be defined, in accordance with the particular conditions of each installation. • Upper measurement and control systems used to control the quality of energy. Measurement and control of harmonics. To be defined, in accordance with the particular conditions of each installation. • Any unit of the CIRCARLIFE family (outdoor posts, wall-mount units, two wheels...) can be connected to the MULTIPOINT system (Standard screen must be adapted). • The MULTIPOINT SYSTEM vehicle charge unit complies with the CE requirements and the current European Union directives for this type of equipment. Unit dimensions These units do not require special anchoring instructions since they are standard in any electrical box installation. The anchoring structure is prepared for 8 mm lag screws or threaded plugs on the CM box and 6 mm on the SL box. mm mm mm 4 23 mm mm mm mm mm mm mm Technical Features Type Input Voltage LAN Network SL Charging Point Scalable master WB control Technical Features Page CCL-CM 230V AC 1P+N Ethernet RJ45 RS 485 Modbus 32 WB Points 69 .Catalogue 2013-2014

CIRCONTROL - CirCarLife E4.2 Slave Wallbox Description The multi-point system of the CirCarLife range has been designed to offer a smart electric vehicle charging solution for car parks with multiple outlet sockets for electrical vehicles. This solution allows smart electric vehicle charging management of a large number of electric vehicles, controlling different parameters of the electric network and the vehicles connected to it, as well as user and car park manager preferences. In this way, users can get maximum results from vehicle charging in accordance with user requirements by charging under the most favourable conditions in terms of electricity tariffs or by opting for immediate charging. 4 Technical features of WallBox boxes Protection degree : IP54 Built-in energy metering system 24 Compatible with Mode 3 IEC 61851-1. (Certified) Charge status light indicator (blue, green and red) Type II or Schuko connectors, in compliance with the IEC 62196-2 regulations Simple installation. 4-point wall fixing Self-extinguishing ABS plastic casing Communications: RS-485 Customised housing finish and logos Elegant, aesthetic design Unit dimensions 109 mm 225 mm 320 mm 51 mm 125 mm WALLBOX CHARGING .Catalogue 2013-2014 CONNECTION CABLE SUPPORT INCLUDED ONLY WBC SERIES

CIRCONTROL - CirCarLife Basic Series Techincal Features Output Power Output Current Charge system Num. Sockets Input Supply Voltage Socket A Socket B Socket A Socket B Socket A Socket B Technical Features Page 1 230 Vac 3,6 kW _ 16A _ Mode 1 Shucko _ 70 1 CCL-WBC SMART 230 Vac 7,2 kW _ 32 A _ Mode 3 Type 2 _ 70 CCL-WB-SL CCL-WBM SL CCL-WBC 16 SL 4 1 230 Vac 3,6 kW _ 16A _ Mode 3 Type 1 _ 70 25 CCL-WBC 32 SL 1 230 Vac 7,2 kW _ 32 A _ Mode 3 Type 1 _ 70 2 230 Vac 3,6 kW 7,2 kW 16 A 32A Mode 1 Shucko Mode 3 Type 2 70 1 400 Vac 22 kW _ 32 A _ Mode 3 Type 2 _ 71 2 230 Vac 3,6 kW 22 kW 16 A 32 A Mode 3 Type 2 Mode 1 Shucko 71 CCL-WB-SL-MIX CCL-WBM-SL TRI CCL-WB-SL MIX TRI .Catalogue 2013-2014

CIRCONTROL - CirCarLife CirCarLife Intelligent recharging solutions for electric vehicles E5. QUICK CHARGING SYSTEM Description CIRCONTROL’s ultra-fast charging stations offer the fastest way to recharge the current electric vehicles used. the innovative construc- tion design offers a quick charging solution that is easy to use and complies with the current standards (CHAdeMO, Combo...) for fast electric vehi- cle charging with direct current. ease of installation and electrical pro- tection to increase user safety are other major factors of consideration in the system design. Integrated communications in this device enable permanent connec- tion with a remote control station, which monitors the device charging data in real time and activates the device remotely, meaning it can be simply and fully exploited. 5 26 COMPACT ADVANCE Integrated dispenser power unit ADVANCE COMPACT COMBO 2 (CCS) .Catalogue 2013 - Communication CHAdeMO Socket COMBO 2 Combo Socket - -

CIRCONTROL - CirCarLife E5.1 QUICK CHARGING ADVANCE SYSTEM Description AC AC/DC Fast charger Circontrol’s quick charging stations are the fastests way of charging today’s electric vehicles. Their innovative, original design offers a fast, easy to use charging solution, in line with CHAdeMO’s current standards for the quick, direct current charging of electric vehicles. This solution has a user friendly interface, vandal proof design and easy to install structure. Communications (Ethernet, 3G...) has been integrated in all models allowing remote controlling of the units and remote monitoring in real time. This feature provides and easy way to integrate in higher systems allowing owner to take profit of it. Technical especifications Ref QP1 V in I in P in F Hz V out I out 400VAC Type Connector type 80A 58 kVA 50/60Hz +/- 5% 500VDC 120ADC JEVS G105 500VDC (Connector 1) 120ADC (Connector 1) JEVS G105 (Connector 1) 5 Charging Mode Technical Features Page Mode 4 72 CCL- QP1 CCL- QPM QPMIX CCL- QP-MIX 400VAC 117A 84 kVA 50/60Hz +/- 5% CCL- QPM MIX 400VAC (Connector 2) 32A (Connector 2) Type2 (Connector 2) CCL- QP-MIX 63 500VDC (Connector 1) 120ADC (Connector 1) JEVS G105 (Connector 1) Mode 4 (Connector 1) Mode 3 (Connector 2) 73 QPMIX 63 400VAC 143A 103 kVA Mode 4 (Connector 1) 50/60Hz +/- 5% 74 CCL- QPM MIX 63 400VAC (Connector 2) 63A (Connector 2) Type2 (Connector 2) CCL- QP2 500VDC (Connector 1) 120ADC (Connector 1) Mode 3 (Connector 2) JEVS G105 x2 (Connector 1) QP2 CCL- QPM 400VAC 160A 170 kVA 50/60Hz +/- 5% Mode 4 500VDC (Connector 2) CCL- QPM 120ADC (Connector 2) 75 JEVS G105 x2 (Connector 2) Accesories Ref Accesories Code Description CCL-QP-FIL 490065 Harmonics Filter CCL-QP-IP55 490103 IP55 Conversion for CCL-QPM CCL-QP-3G 460066 3G Modem .Catalogue 2013-2014 27

CIRCONTROL - CirCarLife Technical features User interface LCD Screen for user interaction. Start, Stop and Emergency Stop buttons. Light indicator of the charging status. Instructions for use displayed on the screen. RFID Identification and pre-payment. Options Harmonic Filtering. IP55 Protection for power module. 3G Communications. 5 Security & Protection Power module and charging station splitted. IK10 Vandal-proof polyurethane casing. Standard working temperature range: -10ºC to 45ºC. 28 Overcurrent and earth leakage protection. EV Standar: IEC 62196-3, IEC 61851-1, CHAdeMO. Charging Management Current socket lock during the charging process (Mode 3 & Mode 4). Consumption counter kWh and charging time displayed. Time and consumption based prepayment modes. Simultaneous charging AC & DC. Communications & Protocols. Remote control and monitoring of the unit through standar XML & HTML. OCPP Protocol integration. Ethernet: 10/100BaseTX communication. Embedded Scada Software for mantenance & control. .Catalogue 2013-2014

CIRCONTROL - CirCarLife E5.2 QUICK CHARGING COMPACT SYSTEM Description Circontrol Quick Charger Compact unit is able to charge all electric vehicles using DC CHAdeMO and AC standards. Charge your car while you take a cup of tea, it will not take longer than 15min. Our Quick Chargers are equipped with dual technology allowing simultaneous charging of two cars making suitable for business and commercial fleets as well as petrol station along the roads. The Compact version has been adapted with latest communication protocols OCPP and XML. Circontrol offers an innovative software based in SCADA for remote control and as a management tool. Charging operator can friendly access to status information, graphics and charge reports according historical data registered. 5 Security & Protection User interface Quick Charging in 15 minutes Protecions rate IP55 IK10 8” LCD screen for user interaction 29 Temperature range -30ºC to +45ºC Start, Stop and emergency buttons Light indications for status indication Protection against overloads, short-circuits and insulation faults with an automatic switch RFID identification and prepayment EV standards: IEC 62196-3, IEC 61851-1, CHAdeMO Charging management Mode 3 and mode 4 locking mechanism Real time energy metering Time and consumption based prepayment modes Simultaneous AC & DC charging with maximum demand control Communications and protocols Remote control and monitoring of the unit through standard XML & HTML OCPP protocol integration Ethernet 10/100BaseTX communication Options Harmonic filtering 3G communications .Catalogue 2013-2014

CIRCONTROL - CirCarLife Technical Features Type Ref V in F Hz I in P in V out I out Input Connector type Charging Mode Technical Features Page 76 Output CCL-QPC 400VAC 50/60Hz +/- 5% 80 A 58 kVA 500V 120ADC JEVS G105 Mode 4 500VDC 120ADC JEVS G105 Mode 4 400VAC 32A Type 2 Mode 3 500VDC 120ADC JEVS G105 Mode 4 CCl-QPC-MIX QPC 5 400VAC 50/60Hz +/- 5% 117 A 84 kVA 77 CCL-QPC-MIX 63 400VAC 50/60Hz +/- 5% 143 A 103 kVA 78 400VAC 63A Type 2 Mode 3 30 Accesories Ref .Catalogue 2013-2014 Description CCL-QP-FIL 490065 Harmonic Filtering CCL-QP-3G Accessories Code 460066 3G Modem

CIRCONTROL - CirCarLife E5.3 QUICK CHARGING COMBO 2 Description Circontrol CCQC (Compact combined quick charged) combine dual port 50kW DC and AC 43kW charger. Designed to support dual protocol CHADEMO and CCS (combo 2) to cover all users needs, making suitable for business and commercial fleets as well as petrol station along the roads. The Compact Combined version has been adapted with latest communication protocols OCPP and XML. Circontrol offers an innovative software based in SCADA for remote control and as a management tool. Charging operator can friendly access to status information, graphics and charge reports according historical data registered. 5 Technical Features User interface Quick Charging in 15 minutes 8” LCD screen for user interaction 31 Start, Stop and emergency buttons Light indications for status indication RFID identification and prepayment Charging management Mode 3 and mode 4 locking mechanism Real time energy metering Time and consumption based prepayment modes Simultaneous AC & DC charging with maximum demand control Communications and protocols Remote control and monitoring of the unit through standard XML & HTML OCPP protocol integration Ethernet 10/100BaseTX communication Security & Protection IP Rate: IP54 Temperature range -30ºC to +45ºC Protection against overloads, short-circuits and insulation faults with an automatic switch EV standards: IEC 62196-3, IEC 61851-1, CHAdeMO and CCS (combo 2) .Catalogue 2013-2014

CIRCONTROL - CirCarLife Technical features Type Ref V in F Hz I in P in V out I out Input Connector type Charging Mode Technical Features Page 79 Output CCL-QPCCCS 400VAC 50/60Hz +/- 5% 80 A 58 kVA 500V 120ADC JEVS G105 Mode 4 120ADC JEVS G105 Mode 4 120 ADC Type 2 COMBO Mode 3 500 VDC 120ADC JEVS G105 Mode 4 500VDC 120ADC Type 2 COMBO Mode 4 CCl-QPCCH-CCS 5 400VAC COMBO2 (CCS) 32 50/60Hz +/- 5% 80 A 58 kVA CCL-QPCCH-CCSAC63 400VAC 50/60Hz +/- 5% 143 A 500VDC 103 kVA 81 400 VAC .Catalogue 2013-2014 80 63A Type 2 Mode 3

CIRCONTROL - CirCarLife CirCarLife Intelligent recharging solutions for electric vehicles E.6 Management and control software Description CirCarlife Scada represents an integral software solution that focuses on the control and parameterisation of smart electric vehicle charging points and units. Nowadays, companies want centralised control of the whole installation for management and maintenance purposes. CIRCONTROL’s CirCarlife Scada software can read the instantaneous values of all CirCarlife units in real time and generate tables and historical logs of data that will be saved in the central processing unit (PC) so that this information can be studied later. In addition, CirCarlife Scada can download all stored data to units with an internal memory.The user can fully control its charging network, checking information on the installation’s status and general consumption in real time. The user can generate custom screens and create alarms, events, reports, tables, etc. with the internal variables of the system. 6 NEW Technical Features 33 Remote equipment monitoring and parameterisation. Display of parameters and the status of devices in real time. Records and prints historical logs in table or graph format. Multipoint Web server and Built-in XML Server. Creation of application access profiles and users with a user and password. Very versatile and easy to use. Compatible with OPC software for PS/PSS. Alarms module (events). Creation of customised screens. Optional control actions can be performed on units. Report generator and energy bill simulator module, optional emulation of tariffs or hourly periods. Specifications Ref Code CCL-SCADA 490052 .Catalogue 2013-2014 .Catalogue 2013-2014

CIRCONTROL- CirCarLife CirCarLife Intelligent recharging solutions for electric vehicles E7. ACCESORIES E7.1 SMART STANDALONE DATA CENTRALISING UNIT CDU-TCP Description 7 34 The CDU-TCP is a device with the latest CIRCONTROL technology, based on the CirCarLife Scada Software. Inside there is a microprocessor with 64Mb memory and driver routines for CIRCONTROL equipment. It can support up to 32 charging stations in its RS485 Bus, and through its Ethernet connection you can access to the internal RS485 bus and the internal memory, remotely through e.g. Internet. It records and stores several weeks of data from connected equipment, in case of loss of communication with the control system (higher SCADA). Once retrieved the communication, the CDU-TCP returns the data stored in its memory to the control system (SCADA), preventing loss of data while there was no communication. This team is capable of being programmed to manage events (alarms) taking into account any parameter of any CIRCONTROL unit connected to it. The CDU-TCP does not store SCADA screens or reports. These must be on a PC with a superior SCADA, connected to one or more CDU-TCP who will be in charge of providing data to the SCADA. Connection example .Catalogue 2013-2014 Requeriments For the CDU-TCP programming, CirCarLife Scada EDITOR 3.0 or higher is required. After starting the Software installation, choose the custom option and install only the EDITOR. Follow steps to complete the installation. The next step is to electrically connect the computers using the following scheme.

CIRCONTROL - CirCarLife E7.2 COMMUNICATION ACCESSORIES MODEM-3G Description The CirCarlife telecommunication accessories can be used to connect all units of the Circarlife range and establish communications networks, even remotely. The user can remotely manage the full display and control all equipment with the use of the CirCarlife Scada control and supervision software and 3G modem. Ideal for improving and reducing communication installations between outdoor and car park devices, where the installation and configuration of cabling elements required for communications networks is not always a simple task. 7 Technical features Low energy consumption Rigid aluminium box 35 Compact unit High-speed processor (ARM 9) 10/100 Mbps Ethernet Port Remote configuration and management Class 1 Div 2 Certified Supported Technologies (HSUPA, UMTS, EDGE, GPRS (MS-12), GSM) Supported Bands: · Three-band for UMTS/HSDPA/HSUPA · 850/1900/2100 MHz · Four-band GPRS/EDGE · 850/900/1800/1900 MHz” Temperature range: -30ºC to 70º C Specifications Ref Code MODEM-3G 490028 .Catalogue 2013-2014

CIRCONTROL - CirCarLife E.7.3 PRE-PAYMENT SOLUTIONS CCL- CARD, CCL- TERM, CCL- Soft SAFE SYSTEM Description 7 CIRCONTROL supplies the necessary equipment to recharge the prepayment cards used to charge for the electricity service (software, card loader, RFID cards, pay station). The payment method can be done manually or automatically, using a pay station that includes note reader, coins and CirCarLife cards dispenser or PC software that allows you to charge the card with specific tariffs measured in kwh, credit. Restrictions of used also can be applied, etc. 36 Application Models CODE DESCRIPTION CCL-CARD 490012 CirCarLife proximity cards without credits. CCL-SOFT 490014 Software and USB reader CCL-CARD20 490020 CirCarLife proximity cards with 20 credits CCL-CARD50 490021 CirCarLife proximity cards with 50 credits CCL-CARD90 490022 CirCarLife proximity cards with 90 credits CCL-TERM The Prepayment system uses proximity cards (credit card format) with precharged credits that will be discounted according to consumption. These cards can be recharged as often as desired, with different recharging ways to load according to needs. REF 490013 Standalone terminal for recharging CirCarLife cards. Pre-payment systems 1 Stand-alone terminal (CCL-TERM) .Catalogue 2013-2014 2 Software Pre-paid (CCL-SOFT)

CirCarLife Intelligent recharging solutions for electric vehicles E8. Technical Features 8 37

CIRCONTROL - CirCarLife Basic Wallbox Series - CCL-WBC Type CCL-WBC Code 490074 Number of sockets 1 Input AC power supply 1P + N + PE AC Voltage 230 V AC +/- 10% Nominal input current ** 16 A Nomina input power 3,6kW Required power supply capacity 3,6 kVA Frequency 50 / 60 Hz Output Maximum output power 3,6 kW Maximum output current 16 A AC output voltage 230 V AC 1P + N Charge system Socket A 8 Mode 3 (IEC 61851) Type 1 cable tethered (UNE EN 62196-2) Socket B - General Cable lenght Enclosure rating 38 5 meters IP 54 / IK 10 Enclosure material ABS plastic Installation mode Simple installation, 4-point wallfixing Power limit control Mode 3 PWM control according ISO/IEC 61851-1 Operating temperature -10 to +45 °C Operating humidity To 95% RH Non-condensing Light beacon Three color led status Net weight 4 Kg Optional devices Extended Temperature range * depending on local installation .Catalogue 2013-2014 Heater (-30 to + 45 °C)

CIRCONTROL - CirCarLife Basic Wallbox Series - CCL-WBC-32 Type CCL-WBC-32 Code 490123 Number of sockets 1 Input AC power supply 1P + N + PE AC Voltage 230 V AC +/- 10% Nominal input current** 32 A Nominal input pow 7,2 kW Required power supply capacity 7,2 kVA Frequency 50 / 60 Hz Output Maximum output power 7,2 kW Maximum output current 32 A AC output voltage 230 V AC 1P + N Charge system Socket A Mode 3 (IEC 61851) 8 Type 1 (UNE EN 62196-2) cable tethered General Cable lenght 5 meters Enclosure rating IP 54 / IK 10 Enclosure material ABS plastic Installation mode Simple installation, 4-point wallfixing Power limit control Mode 3 PWM control according ISO/IEC 61851-1 Operating temperature -10 to +45 °C Operating humidity To 95% RH Non-condensing Light beacon Three color led status Net weight 4 Kg 39 Optional devices Extended Temperature range Heater (-30 to + 45 °C) **power limit control by software .Catalogue 2013-2014

CIRCONTROL - CirCarLife Basic Wallbox Series - CCL-WB-MIX Type CCL-WB-MIX Code 490076 Number of sockets 2 Input AC power supply AC Voltage 1P + N + PE 3P + N + PE 230 AC +/- 10% * 400 V AC +/- 10% Nominal input current 48 A Nominal input power 3,6 kW 22 kW Required power supply capacity 3,6 kVA 22 kVA 50 / 60 Hz - Maximum output power 7,2 kW (Socket A) 22 kW (Socket B) Maximum output current 16 A (Socket A) 32 A (Socket B) 230V AC +/- 10% 400V AC +/- 10% Frequency Output AC output voltage Charge system Socket A 8 Mode 3 (IEC 61851) Type 2 (UNE EN 62196-2) Socket B Mode 1 & Mode 2 CEE 7/4 (Schuko) or BS1363 (UK) General Cable lenght - Enclosure rating 40 IP 54 / IK 10 Enclosure material ABS plastic Installation mode Simple installation, 4-point wallfixing Power limit control Operating temperature Operating humidity Net weight Mode 3 PWM control according ISO/IEC 61851-1 -10 to +45 °C To 95% RH Non-condensing 4 Kg Optional devices Extended Temperature range * depending on local installation .Catalogue 2013-2014 Heater (-30 to + 45 °C)

CIRCONTROL - CirCarLife Basic Wallbox Series - CCL-WBM Type CCL-WBM Code 490072 Number of sockets 1 Input AC power supply * AC Voltage Nominal input current ** 1P + N + PE 3P + N + PE 230AC +/- 10% 400 V AC +/- 10% 32 A 32 A Nominal input power 7,2 k 21 kW Required power supply capacity 7,2 kVA 21 kVA 50 / 60 Hz 50 / 60 Hz Maximum output power 7,2 kW 21 kW Maximum output current 32 A 32 A 230 V AC +/- 10% 400 V AC +/- 10% Frequency Output AC output voltage Charge system Socket A Socket B 8 Mode 3 (IEC 61851) Type 2 (UNE EN 62196-1) - General Cable lenght - Enclosure rating IP 54 / IK 10 Enclosure material ABS plastic Installation mode Simple installation, 4-point wallfixing Power limit control Operating temperature Operating humidity Light beacon Net weight 41 Mode 3 PWM control according ISO/IEC 61851-1 -10 to +45 °C To 95% RH Non-condensing Three color led status 4 Kg Optional devices Extended Temperature range Heater (-30 to + 45 °C) * depending on local installation **power limit control by software .Catalogue 2013-2014

CIRCONTROL - CirCarLife Basic Wallbox Series - CCL-WBMC Type CCL-WBMC Code 490133 Number of sockets 1 Input AC power supply * AC Voltage 1P + N + PE 3P + N + PE 230 V AC +/- 10% 400 V AC +/- 10% Nominal input current ** 32 A Nominal input power 7,2 kW 22 kW Required power supply capacity 7,2 kVA 22 kVA Frequency 50 / 60 Hz Output Maximum output power 7,2 kW 22 kW Maximum output current AC output voltage 32 A 230 V AC +/- 10% 400 V AC +/- 10% Charge system Socket A 8 Mode 3 (IEC 61851) Type 2 (UNE EN 62196-1) Socket B - General Cable lenght 5 meters Enclosure rating Enclosure material 42 IP 54 / IK 10 ABS plastic Installation mode Simple installation, 4-point wallfixing Power limit control Operating temperature Operating humidity Light beacon Net weight Mode 3 PWM control according ISO/IEC 61851-1 -10 to +45 °C To 95% RH Non-condensing Three color led status 4 Kg Optional devices Extended Temperature range * depending on local installation **power limit control by software .Catalogue 2013-2014 Heater (-30 to + 45 °C)

CIRCONTROL - CirCarLife Smart Wallbox Series - CCL-WBC-SMART Type CCL-WBC-SMART Code 490075 Number of sockets 1 Input AC power supply 1P + N + PE AC Voltage 230V AC +/- 10% Nominal input current** 16 A Nominal input power 3,6 kW Required power supply capacity 3,68 kVA Frequency 50 / 60 Hz Output Rated output power 3,6 kW Rated output current* 16 A 230 V AC 1P + N Charge system Socket A Mode 3 (IEC 61851) Type 1 (UNE EN 62196-2) tethered cable Socket B - 8 Energy meter Acuracy class in active energy Class B - EN50470-3 Accuracy class in reactive energy Class 2 - EN62053-23 Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1 43 Network connection Ethernet 10/100BaseTX (TCP-IP) General Cable lenght 5 meters Enclosure rating IP 54 / IK 10 Enclosure material ABS plastic Installation mode Simple installation, 4-point wallfixing Power limit control Mode 3 PWM control according ISO/IEC 61851-1 Operating temperature -10 to +45 °C Operating humidity To 95% RH Non-condensing RFID system ISO / IEC14443A / B Display LCD Backlight double line text Rear Light beacon Three color led status Interface protocol OCCP / XML Net weight 4 Kg Optional devices Wireless Comunication 3G / GPRS Extended Temperature range -30 to +45 °C (Heater system included) * Adjustable power limit control .Catalogue 2013-2014

CIRCONTROL - CirCarLife Smart Wallbox Series - CCL-WBC32-SMART Type CCL-WBC32-SMART Code 490124 Number of sockets 1 Input AC power supply 1 P + N +PE AC Voltage 230V AC +/- 10% Nominal input current ** 32 A Nominal input power 7,2 kW Required power supply capacity 7,2 kVA Frequency 50 / 60 Hz Output Rated output power 7,2 kW Rated output current 32 A 230 V AC 1P + N Charge system Socket A 8 Mode 3 (IEC 61851) Type 1 cable tethered (UNE EN 62196-2) Socket B - Energy meter Acuracy class in active energy Accuracy class in reactive energy Class 2 - EN62053-23 Meter standards 44 Class B - EN50470-3 EN62052-11, EN62053-21, EN62053-23, EN61010-1 Network connection Ethernet 10/100BaseTX (TCP-IP) General Cable lenght 5 meters Enclosure rating IP 54 / IK 10 Enclosure material ABS plastic Installation mode Simple installation, 4-point wallfixing Power limit control Mode 3 PWM control according ISO/IEC 61851-1 Operating temperature -10 to +45 °C Operating humidity To 95% RH Non-condensing RFID system ISO / IEC14443A / B Display LCD Backlight double line text Rear Light beacon Three color led status Interface protocol OCCP / XML Net weight 4 Kg Optional devices Wireless Comunication 3G / GPRS Extended Temperature range -30 to +45 °C (Heater system included) * Adjustable power limit control **power limit control by software .Catalogue 2013-2014

CIRCONTROL - CirCarLife Smart Wallbox Series - CCL-WBM-SMART Type CCL-WBM-SMART Code 490073 Number of sockets 1 Input AC power supply 1P + N + PE AC Voltage 230 V AC +/- 10% Nominal input current** 32 A Nomina input power 7,2 kW Required power supply capacity 7,2 kVA Frequency 50 / 60 Hz Output Rated output power 7,2 kW Rated output current 32 A AC output voltage 230 V AC 1P + N Charge system Socket A Mode 3 (IEC 61851) Type 2 (UNE EN 62196-2) Lock plug system Socket B - 8 Energy meter Acuracy class in active energy Class B - EN50470-3 Accuracy class in reactive energy Class 2 - EN62053-23 Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1 45 Network connection Ethernet 10/100BaseTX (TCP-IP) General Cable lenght - Enclosure rating IP 54 / IK 10 Enclosure material ABS plastic Installation mode Simple installation, 4-point wallfixing Power limit control Mode 3 PWM control according ISO/IEC 61851-1 Operating temperature -10 to +45 °C Operating humidity To 95% RH Non-condensing RFID system ISO / IEC14443A / B Display LCD Backlight double line text Rear Light beacon Three color led status Interface protocol OCCP / XML Net weight 4 Kg Optional devices Wireless Comunication 3G / GPRS Extended Temperature range -30 to +45 °C (Heater system included) **power limit control by software .Catalogue 2013-2014

CIRCONTROL - CirCarLife Smart Wallbox Series - CCL-WBS-SMART Type CCL-WBS-SMART Code 490079 Number of sockets 1 Input AC power supply 1P + N + PE AC Voltage 230V AC +/- 10% Nominal input current** 16 A Nominal input power 3,6 kW Required power supply capacity 3,68 kVA Frequency 50 / 60 Hz Output Rated output power 3,6 kW Rated output current* 16 A AC output voltage 230 V AC 1P + N Charge system Socket A 8 Mode 1 & Mode 2 CEE 7/4 (Schuko) or BS1363 (UK) Socket B - Energy meter Acuracy class in active energy Accuracy class in reactive energy Class 2 - EN62053-23 Meter standards 46 Class B - EN50470-3 EN62052-11, EN62053-21, EN62053-23, EN61010-1 Network connection Ethernet 10/100BaseTX (TCP-IP) General Cable lenght - Enclosure rating IP 54 / IK 10 Enclosure material ABS plastic Installation mode Simple installation, 4-point wallfixing Power limit control Mode 3 PWM control according ISO/IEC 61851-1 Operating temperature -10 to +45 °C Operating humidity To 95% RH Non-condensing RFID system ISO / IEC14443A / B Display LCD Backlight double line text Rear Light beacon Three color led status Interface protocol OCCP / XML Net weight 4 Kg Optional devices Wireless Comunication 3G / GPRS Extended Temperature range -30 to +45 °C (Heater system included) * Adjustable power limit control **Power limit control by software .Catalogue 2013-2014

CIRCONTROL - CirCarLife Smart Wallbox Series - CCL-WB-MIX-SMART Type CCL-WB-MIX-SMART Code 490077 Number of sockets 2 Input AC power supply 1P + N + PE AC Voltage 230 V AC +/- 10% Nominal input current** 48 A Nomina input power 11 kW Required power supply capacity 11 kVA Frequency 50 / 60 Hz Output Rated output power 7,2 kW (Socket A) 3,6 kW (Socket B) Rated output current* 32 A (Socket A) 16 A (Socket B) AC output voltage 230 V AC 1P + N Charge system Socket A Socket B 8 Mode 3 (IEC 61851) T ype 2 (UNE EN 62196-2) Lock plug system Mode 1 & Mode 2 CEE 7/4 (Schuko) or BS1363 (UK) Energy meter Acuracy class in active energy Class B - EN50470-3 Accuracy class in reactive energy Class 2 - EN62053-23 Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1 47 Network connection Ethernet 10/100BaseTX (TCP-IP) General Cable lenght - Enclosure rating IP 54 / IK 10 Enclosure material ABS plastic Installation mode Simple installation, 4-point wallfixing Power limit control Mode 3 PWM control according ISO/IEC 61851-1 Operating temperature -10 to +45 °C Operating humidity To 95% RH Non-condensing RFID system ISO / IEC14443A / B Display LCD Backlight double line text Rear Light beacon Three color led status Interface protocol OCCP / XML Net weight 4 Kg Optional devices Wireless Comunication 3G / GPRS Extended Temperature range -30 to +45 °C (Heater system included) * Adjustable power limit control **power limit control by software .Catalogue 2013-2014

CIRCONTROL - CirCarLife Smart Wallbox Series - CCL-WB2M-SMART Type CCL-WB2M-SMART Code 490106 Number of sockets 2 Input AC power supply 1P + N + PE AC Voltage 230 V AC +/- 10% Nominal input current** 64 A Nomina input power 15 kW Required power supply capacity 15 kVA Frequency 50 / 60 Hz Output Rated output power Rated output current 32 A (Socket A) 32 A (Socket B) AC output voltage 8 7,2 kW (Socket A) 7,2 kW (Socket B) 230 V AC 1P + N Charge system Socket A Mode 3 (IEC 61851) Type 2 (UNE EN 62196-2) Lock plug system Socket B Mode 3 (IEC 61851) Type 2 (UNE EN 62196-2) Lock plug system Energy meter Acuracy class in active energy 48 Class B - EN50470-3 Accuracy class in reactive energy Class 2 - EN62053-23 Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1 Network connection Ethernet 10/100BaseTX (TCP-IP) General Cable lenght - Enclosure rating IP 54 / IK 10 Enclosure material ABS plastic Installation mode Simple installation, 4-point wallfixing Power limit control Mode 3 PWM control according ISO/IEC 61851-1 Operating temperature -10 to +45 °C Operating humidity To 95% RH Non-condensing RFID system ISO / IEC14443A / B Display LCD Backlight double line text Rear Light beacon Three color led status Interface protocol OCCP / XML Net weight 4 Kg Optional devices Wireless Comunication 3G / GPRS Extended Temperature range -30 to +45 °C (Heater system included) * Adjustable power limit control **power limit control by software .Catalogue 2013-2014

CIRCONTROL - CirCarLife Smart Wallbox Series - CCL-WBM-SMART-TRI Type CCL-WBM-SMART-TRI Code 490089 Number of sockets 1 Input AC power supply 3P + N + PE AC Voltage 400 V AC +/- 10% Nominal input current** 32 A Nomina input power 22 kW Required power supply capacity 22,1 kVA Frequency 50 / 60 Hz Output Rated output power 22 kW Rated output current 32 A AC output voltage 400 V AC 3P + N Charge system Socket A Mode 3 (IEC 61851) Type 2 (UNE EN 62196-2) Lock plug system Socket B - 8 Energy meter Acuracy class in active energy Class 1 - EN50470-3 Accuracy class in reactive energy Class 2 - EN62053-23 Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1 49 Network connection Ethernet 10/100BaseTX (TCP-IP) General Cable lenght - Enclosure rating IP 54 / IK 10 Enclosure material ABS plastic Installation mode Simple installation, 4-point wallfixing Power limit control Mode 3 PWM control according ISO/IEC 61851-1 Operating temperature -10 to +45 °C Operating humidity To 95% RH Non-condensing RFID system ISO / IEC14443A / B Display LCD Backlight double line text Rear Light beacon Three color led status Interface protocol OCCP / XML Net weight 4 Kg Optional devices Wireless Comunication 3G / GPRS Extended Temperature range -30 to +45 °C (Heater system included) * Adjustable power limit control .Catalogue 2013-2014

CIRCONTROL - CirCarLife Smart Wallbox Series - CCL-WB-MIX-SMART-TRI Type CCL-WB-MIX-SMART-TRI Code 490090 Number of sockets 2 Input AC power supply 3P + N + PE AC Voltage 230 V AC or 400 V AC +/- 10% * Nominal input current** 48 A Nomina input power 25 kW Required power supply capacity 25,7 kVA Frequency 50 / 60 Hz Output Rated output power 22 kW (Socket A) 3,6 kW (Socket B) Rated output current 32 A (Socket A) 16 A (Socket B) AC output voltage 400 V AC +/- 10% Charge system 8 Socket A Mode 3 (IEC 61851) Type 2 (UNE EN 62196-2) Lock plug system Socket B Mode 1 & Mode 2 CEE 7/4 (Schuko) or BS1363 (UK) Energy meter Acuracy class in active energy 50 Class 1 - EN50470-3 Accuracy class in reactive energy Class 2 - EN62053-23 Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1 Network connection Ethernet 10/100BaseTX (TCP-IP) General Cable lenght - Enclosure rating IP 54 / IK 10 Enclosure material ABS plastic Installation mode Simple installation, 4-point wallfixing Power limit control Mode 3 PWM control according ISO/IEC 61851-1 Operating temperature -10 to +45 °C Operating humidity To 95% RH Non-condensing RFID system ISO / IEC14443A / B Display LCD Backlight double line text Rear Light beacon Three color led status Interface protocol OCCP / XML Net weight 4 Kg Optional devices Wireless Comunication 3G / GPRS Extended Temperature range -30 to +45 °C (Heater system included) * Adjustable power limit control **power limit control by software .Catalogue 2013-2014

CIRCONTROL - CirCarLife Smart Wallbox Series - CCL-WB2M-SMART-TRI Type CCL-WB2M-SMART-TRI Code 490107 Number of sockets 2 Input AC power supply 3P + N + PE AC Voltage 400V AC +/- 10% Nominal input current ** 64 A Nominal input power 44 kW Required power supply capacity 44,2 kVA Frequency 50 / 60 Hz Output Maximum output power 22 kW (Socket A) 22 kW (Socket B) Maximum output current 32 A (Socket A) 32 A (Socket B) AC output voltage 400 V AC 3P + N Charge system Socket A Socket B 8 Mode 3 (IEC 61851) Type 2 (UNE EN 62196-2) Lock plug system Mode 3 (IEC 61851) Type 2 (UNE EN 62196-2) Lock plug system Energy meter Acuracy class in active energy Class 1 - EN50470-3 Accuracy class in reactive energy Class 2 - EN62053-23 Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1 51 Network connection Ethernet 10/100BaseTX (TCP-IP) General Cable lenght - Enclosure rating IP 54 / IK 10 Enclosure material ABS plastic Installation mode Simple installation, 4-point wallfixing Power limit control Mode 3 PWM control according ISO/IEC 61851-1 Operating temperature -10 to +45 °C Operating humidity To 95% RH Non-condensing RFID system ISO / IEC14443A / B Display LCD Backlight double line text Rear Light beacon Three color led status Interface protocol OCCP / XML Net weight 4 Kg Optional devices Wireless Comunication 3G / GPRS Extended Temperature range -30 to +45 °C (Heater system included) * Adjustable power limit control **power limit control by software .Catalogue 2013-2014

CIRCONTROL - CirCarLife Charging Post Basic Series - CCL-PE1-COM Type CCL-PE1-COM Code 490000 Number of sockets 1 Input AC power supply 1P + N + PE AC Voltage 230 V AC +/- 10% Nominal input current 16 A Nominal input power 3,6 kW Required power supply capacity 3,68 kVA Frequency 50 / 60 Hz Output Rated output power 3,6 kW Rated output current 16 A AC output voltage 230 V AC 1P + N Charge system Mode Mode 1 & Mode 2 Socket A 8 CEE 7/4 (Schuko) or BS1363 (UK) Electrical protections Overcurrent protections Safety Protection 52 MCB RCD 30mA autorecovery (class A) Energy meter Integrated meter Network connection Bus RS-485 General Enclosure rating IP 54 / IK 10 Enclosure material Stainless steel Socket protection Socket lock with mobile head Operating temperature -30 to + 45 °C (Heater system included) Operating humidity To 95% RH Non-condensing RFID system ISO / IEC14443A / B Display 2 units of 7 segments display Net weight 40 Kg Optional devices Wireless Comunication - RCD Protection RCD class B MCB Autorecovery .Catalogue 2013-2014

CIRCONTROL - CirCarLife Charging Post Basic Series - CCL-PE2-COM Type CCL-PE2-COM Code 490025 Number of sockets 2 Input AC power supply 1P + N + PE AC Voltage 230 V AC +/- 10% Nominal input current 32 A Nominal input power 7,2 kW Required power supply capacity 7,36 kVA Frequency 50 / 60 Hz Output Rated output power 3,6 kW (Socket A) 3,6 kW (Socket B) Rated output current 3,6 kW (Socket B) 16 A (Socket A) AC output voltage 230 V AC 1P + N Charge system Mode Socket A CEE 7/4 (Schuko) or BS1363 (UK) Socket B 8 Mode 1 & Mode 2 CEE 7/4 (Schuko) or BS1363 (UK) Electrical protections Overcurrent protections MCB Safety protection RCD 30mA autorecovery (class A) 53 Energy meter Acuracy class in active energy Integrated meter Meter standards EN62052-11, EN62053-21, EN62053-23, EN61010-1 Network connection Bus RS-485 General Enclosure rating IP 54 / IK 10 Enclosure material Stainless steel Socket protection Socket lock with mobile head Operating temperature -30 to + 45 °C (Heater system included) Operating humidity To 95% RH Non-condensing RFID system ISO / IEC14443A / B Display 2 units of 7 segments display Power limit control Mode 3 PWM control according ISO/IEC 61851-1 Interface protocol XML Net weight 40 Kg Optional devices Wireless Comunication 3G RCD Protection RCD class B MCB Autorecovery .Catalogue 2013-2014

CIRCONTROL - CirCarLife Charging Post Basic Series - CCL-PE2-IP Type CCL-PE2-IP Code 490026 Number of sockets 2 Input AC power supply 1P + N + PE AC Voltage 230 V AC +/- 10% Nominal input current 32 A Nominal input power 7,2 kW Required power supply capacity 7,59 kVA Frequency 50 / 60 Hz Output Rated output power 3,6 kW (Socket A) 3,6 kW (Socket B) Rated output current 16 A (Socket A) 16 A (Socket B) AC output voltage 230 V AC 1P + N Charge system 8 Mode Mode 1 & Mode 2 Socket A CEE 7/4 (Schuko) or BS1363 (UK) Socket B CEE 7/4 (Schuko) or BS1363 (UK) Electrical protections Overcurrent protections 54 MCB Safety protection RCD 30mA autorecovery (class A) Energy meter Acuracy class in active energy Integrated meter Network connection Ethernet 10/100BaseTX (TCP-IP) Bus RS-485 General Enclosure rating IP 54 / IK 10 Enc

Add a comment

Related presentations

Related pages

CIRCONTROL - CirCarLife

CIRCONTROL - CirCarLife.Catalogue 2013-2014 59 8 Charging post smart series -CCL-pT3-URBaN Type CCL-pT3-URBaN Code 490138 Number of sockets 2 Input
Read more

CIRCONTROL - CirCarLife

CIRCONTROL - CirCarLife.Catalogue 2013-2014 57 8 Charging post smart series -CCL-pm-mIX-URBaN Type CCL-pm-mIX-URBaN Code 490136 Number of sockets 2 Input
Read more

Mobility & eMobility - CIRCONTROL

E1.1 CHARgINg mODEs The EV charging process is ... CIRCONTROL’s ultra-fast charging stations offer the fastest ... CIRCONTROL - CirCarLife.Catalogue 2014 ...
Read more

Mobility & eMobility - Charge Stations for Electric Cars ...

E1.1 CHARgINg mODEs The EV charging process is ... CIRCONTROL’s ultra-fast charging stations offer the fastest ... CIRCONTROL - CirCarLife.Catalogue 2014 ...
Read more

Mobility & eMobility - Charge Stations for Electric Cars ...

The EV charging process is regulated by the IEC 61851 and IEC 62196 international ... The station incor- ... CIRCONTROL - CirCarLife.Catalogue 2014-2015 49 8
Read more

quick charging solution for electric vehicles

CIRCONTROL - CirCarLife.Catalogue 2013 ... petrol station along the roads. ... CIRCONTROL S.A. Quick Charging solution
Read more