advertisement

Asco Numatics 454 Series

50 %
50 %
advertisement
Information about Asco Numatics 454 Series
Technology

Published on February 20, 2014

Author: TerryMcDonald2

Source: slideshare.net

advertisement

special QUALITY / RELIABILITY • Based on 453 technocology, ISO 15552 compliant specifically designed for "Food Industry Applications" • Robust, reliable and long lasting ate to • According to food & pharmaceutical process industry specifications versions SPECIAL COVERS • Anti Corrosion treatment No retention areas Stainless steel nuts and protective screws as an option • Adapted to aggressive cleaning agents, easy to clean and flexible configuration grease ISO 15552 CYLINDERS FOR FOOD INDUSTRY APPLICATIONS - SERIES 454 (see page P229-6)  SPECIAL TUBE PROFILE • Square shaped with rounded edges, no retention areas and light design with a “rail” for magnetic detector • Easy to clean • Laser marked tube as an option  MAGNETIC DETECTION • "Rail" to adapt magnetic detectors (e.g. IP69K version) • Reed-switch type or magnetoresistive type (MR)  ROD SEALS CONFIGURATION • Rod Seals in special PUR, FPM, or FPM + PTFE • External cartridge option for rod seal protection ANTICORROSION MOUNTINGS (see page P235) OPTIONS (see page P229-6) AB7 MP2 MP2 Position detectors (P291) MP4 01429GB-2013/R01 Availability, design and specifications are subject to change without notice. All rights reserved. MS1 MF2 AP6 AP2 MS1 MF1 MOUNTINGS Mountings must be ordered separately: see page P235 Consult our range of mountings with anticorrosion treatment or in stainless steel: see page P235 POSITION DETECTORS Magnetic position detectors must be ordered separately: "T" model (see page P291), reed switch or magneto-resistive type x B

Series CYLINDER FOR FOOD INDUSTRY APPLICATIONS Ø 32 to 100 mm - double acting ISO 15552 with pneumatic cushioning 454 NS GENERAL Detection Equipped for magnetic position detectors Fluid Air or inert gas, filtered, lubricated or not Operating pressure 10 bar, max. [1 bar =100 kPa] Ambient temperature -20°C to +70°C Optimal max. speed ≤ 1 m/s (for optimal service life) Max. speed rate 2 m/s (for higher and lower speed rate, see LFS option) Standards  ISO 15552 CONSTRUCTION Barrel Hard anodized aluminium alloy Positive groove for adapting a magnetic sensor Aluminium alloy with anti-corrossion treatment Self-lubricating metal PUR (polyurethane) Pneumatic, adjustable from both sides with captive screw Stainless steel, AISI 316L stainless steel, hard chromed Stainless steel Ø 32 to 80 mm POM (polyacetal) Ø 100 mm light alloy fitted with an annular permanent magnet PUR (polyurethane) Grease for food & pharmaceutical applications, ISO 21469 FDA 21 CFR § 178.3570 Front and rear ends Bearing Cushioning seals Cushioning Rod Rod nut Piston Piston seals Grease 2D/3D CAD models - In 3D HOW TO ORDER 15-DIGIT PRODUCT CODE 454 A 3 A - - - - A00 Thread connection G = ISO 16030 Options A00 = Without Option SCN = Stainless steel cover nuts AT1 = ATEX zones 1/21 AT2 = ATEX zones 2/22 LFS = Low friction - Ø 32 to 80 mm LSR = Laser marked Logo & Code LSS = Option Combination LSR +SCN Product series 454 Revision letter A = Initial release Rod options 1 3 = Stainless steel single rod 4 =  Stainless steel through rod 6 =  AISI 316L stainless steel single rod 7 =  AISI 316L stainless steel through rod S = Hard chromed single rod 2 = Hard chromed through rod  All cylinders delivered with rod nut, in stainless steel for options 3, 4, 6 and 7. (1) Ø mm 32 40 50 63 80 100 (1) Recommended standard strokes (mm) connect. Ø (G) 25 50 80 100 125 160 200 250 320 400 500 630 700 800 900 10001500 G1/8 l l l l l l l l l l G1/4 l l l l l l l l l l l l G1/4 l l l l l l l l l l l l l G3/8 l l l l l l l l l l l l l l l G3/8 l l l l l l l l l l l l l l l l G1/2 l l l l l l l l l l l l l l l l l max. stroke 2000 2000 2000 2000 2000 2000 Other strokes on request. / Min. stroke: 5 mm Rod seal options A = PUR rod seal for "Agro Applications" F = FPM Rod seal P = FPM Rod seal + PTFE rod scraper C =  Protective cartridge for rod seal protection + "AGRO" PUR rod seal, only available in Ø 80 and Ø 100 mm Note: Cylinders with option "C" are delivered with 10 mm rod overlength.  Diameter (mm) 3 = 32 4 = 40 5 = 50 6 = 63 8 = 80 1 = 100 For extended piston rod and special rod threads, please obtain a code with DPM, our on-line configurator tool. 01429GB-2013/R02 Availability, design and specifications are subject to change without notice. All rights reserved. G

ISO 15552 CYLINDERS FOR FOOD INDUSTRY APPLICATIONS - SERIES 454 SPARE PARTS KITS CODE R S 1 2 3 4 5 5 3 2 4 1 - PUR rod seal for  1 "Agro Applications" 2 - O-ring  A  3 - Cushioning seal  7 6 7 2 3 4 5 5 3 2 4 5 - Stainless steel seal  6 4 - Piston seal  6 - FPM rod seal  7 - PTFE rod scraper 8 - PUR rod scraper  F 8 8 8 7 7 2 3 4 5 5 3 2 2 4 P M 15-DIGIT PRODUCT CODE 454 A S A 0000 A00 Spare Parts digit M Rod seal and rod scraper seal A = PUR rod seal for "Agro Applications" F = FPM Rod Seal P = FPM Rod Seal+ PTFE Rod Scraper seal C = Protective Cartridge for Rod Seal Protection + PUR rod seal for "Agro Applications" Product series  454 Type of kit S = Complete set of seals R = Rod seals only Diameter (mm) 3 = 32 4 = 40 5 = 50 6 = 63 8 = 80 1 = 100 ACCESSORIES • Special adaptor for magnetic detector (code : P494A0029100A00) Magnetic position detectors must be ordered separately: "T" model (see page P291)  • Set of 4 stainless steel protection screws to cover the cylinder mounting holes: Ø (mm) 32-40 50-63 80-100 code P4994395723N001 P4994395735N001 P4994395748N001 • External cartridge for rod seal:  01429GB-2013/R02 Availability, design and specifications are subject to change without notice. All rights reserved. Revision letter A = Initial release Ø (mm) 80 100 code P4994378238N001 P4994378241N001 B

ISO 15552 CYLINDERS FOR FOOD INDUSTRY APPLICATIONS - SERIES 454 DIMENSIONS (mm), WEIGHT (kg) SINGLE-ROD TYPE CYLINDER THROUGH-ROD TYPE CYCLINDER Bare cylinder ISO 15552 Bare cylinder ISO 15552 N+ 1 ZJ + 1 L8 + 1 M BG WH PL L2 VD = PL VA = ØBd11 ØMM SW* 5 = ØBd11 L8 + 1 M M+ 1   ØEE A 1 Stroke   KV* ØKK ZM + 2 A ØRT KW E TG = = TG = E = = A 2 Stroke x 2 [ Width across flats Ø (mm) 32 40 50 63 80 100 A ØBd11 BG E ØEE 22 24 32 32 40 40 G1/8 G1/4 G14 G3/8 G3/8 G1/2 30 35 40 45 45 55 16 16 16 16 17 17 48 54 66 78 96 115 (3) ØKK M10x1,25 M12x1,25 M16x1,5 M16x1,5 M20x1,5 M20x1,5 KV KW L2 L8 M ØMM 16 18 24 24 30 30 94 105 106 121 128 138 48 54 69 69 86 91 5 17 6 19 8 24 8 24 10 33 10 35,5 12 16 20 20 25 25 N 142 159 175 190 214 229 PL ØRT SW 14 16 18,5 19 16,5 19,5 M6 M6 M8 M8 M10 M10 TG 10 32,5 ±0,5 13 38 ±0,5 17 46,5 ±0,5 17 56,5 ±0,5 22 72 ±0,5 22 89 ±0,5 VA 4 4 4 4 4 4 weight VD WH ZJ ZM min. (4) (5) 4 26 120 146 0,49 0,0029 4 30 135 165 0,78 0,0037 4 37 143 180 1,00 0,0053 4 37 158 195 1,35 0,0057 4 46 174 220 2,36 0,0086 4 51 189 240 3,46 0,0099 Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.heattracing.co.uk www.thorneanderrick.co.uk 01429GB-2013/R01 Availability, design and specifications are subject to change without notice. All rights reserved. (3) Thread connections G have standard thread according to ISO 16030. (4) Cylinder weight at 0 mm stroke. (5) Weight to be added per additional mm length.

Add a comment

Related presentations

Presentación que realice en el Evento Nacional de Gobierno Abierto, realizado los ...

In this presentation we will describe our experience developing with a highly dyna...

Presentation to the LITA Forum 7th November 2014 Albuquerque, NM

Un recorrido por los cambios que nos generará el wearabletech en el futuro

Um paralelo entre as novidades & mercado em Wearable Computing e Tecnologias Assis...

Microsoft finally joins the smartwatch and fitness tracker game by introducing the...

Related pages

Configure 454 Series Cylinder - Numatics

454 Series Cylinder Configurator. ... 454 : A '0001' Your ... Copyright © 2015 Numatics, Incorporated. All rights reserved.
Read more

ASCO

ASCO Numatics high quality Magnetventile und pneumatische Regelgeräte für Anwendungen in der industriellen Fluid Automation
Read more

ASCO Numatics 454 Series, ISO1552 Cylinder, ASCO Numatics ...

ASCO Numatics 454 Series Cylinder For The Food Industry - Technical Information ; Detection. Equipped for magnetic position detectors: Fluid: Air or inert ...
Read more

Numatics G454A83A0025A00 - 80mm Bore, 25mm Stroke, Series ...

Numatics G454A83A0025A00 - 80mm Bore, 25mm Stroke, Series 454 Double Acting Cylinders with pneumatic cushioning ASCO Part Number: G454A83A0025A00
Read more

Series 454 - Numatics Cylinder For Food Industry ...

NUMATICS G454A16A0025A00 - 100mm Bore, 25mm Stroke, G1/2, AISI 316 Single Rod, Series G454 Cylinders For Food Industry. ASCO NUMATICS New 454 Series of ...
Read more

Cylinders & Actuators - Numatics Series 450

Numatics Series 450 pneumatic cylinders have a robust tie rod design ideal for medium duty, plus have competitive interchangeability with ISO 15552 ...
Read more

ASCO - Home - Fluid Automation. Right. Now.

ASCO brings together the ASCO & Numatics product lines to be the worlds leading manufacturer of solenoid valves, pneumatic valves, cylinders & actuators ...
Read more

ASCO Numatics

ASCO Numatics high quality solenoid valves and pneumatic control devices for industrial fluid automation applications
Read more

ASCO Numatics

... in SIRAI © we have developed a series of solenoid valves and pressure switches. On these basis, ... © 2013 ASCO Numatics. All Rights Reserved. ...
Read more