Application

53 %
47 %
Information about Application

Published on February 19, 2009

Author: kevbud

Source: slideshare.net

Description

VantagePoint Concepts collection of creative design and printing services helps you create your image through our wide range of printed products and custom services. Custom artwork is created by our staff of artists for both commercial and retail customers. Commercial customers enjoy print and installation services for vehicle wraps and building wraps applied in-house or on-site by our team of installers. Custom point-of-purchase displays can be created to fit products or catalogs created by VantagePoint Concepts. Through the use of our large-format creative design and print capabilities, our customers can acquire attractive trade show and event backdrops and displays. Our facilities design, print and install billboards for our commercial customers. Commercial signage can be made out of a variety of printed materials including metal for name plates. Lightjet photographics prints are created and installed as backlit artwork for commercial and residential use. We create and produce wallpaper, murals and oversized graphics for commercial and home decor markets.

Application Application And Care Tips VantagePointConcepts.com

Wet Weather Safety Tip Rain can collect in the small holes and reduce vision. Use a towel to dry the surface of the Vantage Point Concepts image for a clearer view prior to driving your vehicle.

Rain can collect in the small holes and reduce vision. Use a towel to dry the surface of the Vantage Point Concepts image for a clearer view prior to driving your vehicle.

Prepare the Vehicle If you cannot bring the vehicle into a heated building, make sure that the outside air temperature is above +40º F (+5ºC). Pre-warming the car interior during cold weather application will help insure proper adhesion. Clean the outside glass surface which you will be applying the image to thoroughly with soap and water. Make sure that the glass surface is dry and residue free before applying your Vantage Point Concepts™ window image. Remember: The pressure sensitive adhesive works best if mounted on VERY CLEAN GLASS.

If you cannot bring the vehicle into a heated building, make sure that the outside air temperature is above +40º F (+5ºC). Pre-warming the car interior during cold weather application will help insure proper adhesion. Clean the outside glass surface which you will be applying the image to thoroughly with soap and water. Make sure that the glass surface is dry and residue free before applying your Vantage Point Concepts™ window image. Remember: The pressure sensitive adhesive works best if mounted on VERY CLEAN GLASS.

Position and Apply (WARNING - DO NOT USE A HEAT GUN OR WATER TO APPLY) When applying the window graphic, use masking tape strips to pre-position the image on the vehicle before removing the backing material. Carefully peel off adhesive backing from behind the image and apply from one edge and work to the opposite side, smoothing the image to prevent wrinkles. To remove any wrinkles, gently lift up the image to where the wrinkle is, smooth out the wrinkle with your hand, and continue applying. Vantage Point Concepts are a dry mount product !

(WARNING - DO NOT USE A HEAT GUN OR WATER TO APPLY) When applying the window graphic, use masking tape strips to pre-position the image on the vehicle before removing the backing material. Carefully peel off adhesive backing from behind the image and apply from one edge and work to the opposite side, smoothing the image to prevent wrinkles. To remove any wrinkles, gently lift up the image to where the wrinkle is, smooth out the wrinkle with your hand, and continue applying. Vantage Point Concepts are a dry mount product !

Bond and Trim To help adhesion, lay the disposable backing over the image and rub firmly from the center to the sides of the image. If mounting a full window Vantage Point Concepts image you will have extra material to trim outside of the edge of your rear window glass. Trim the excess material with a razor blade or similar tool to complete the installation. The pressure sensitive adhesive bonds to the glass very well when first applied but sets more firmly after a twenty-four (24) hour period. Avoid power car washes for the first week after application. For longer life avoid using snow scrapers on this image. Treat this image as you would the painted surface of your car. Do not use abrasive cleaners on the image. Rear window mounted wiper blades will cause premature wear of the image.

To help adhesion, lay the disposable backing over the image and rub firmly from the center to the sides of the image. If mounting a full window Vantage Point Concepts image you will have extra material to trim outside of the edge of your rear window glass. Trim the excess material with a razor blade or similar tool to complete the installation. The pressure sensitive adhesive bonds to the glass very well when first applied but sets more firmly after a twenty-four (24) hour period. Avoid power car washes for the first week after application. For longer life avoid using snow scrapers on this image. Treat this image as you would the painted surface of your car. Do not use abrasive cleaners on the image. Rear window mounted wiper blades will cause premature wear of the image.

Bond and Trim The perforated film can be removed by using a thin scraper device. It is best to start in one corner and lift up a small section. After this is done, you can normally use hand force to pull the image from the glass. As with any decal or sticker, the warmer the outside temperature, the easier the removal will be. If any adhesive residue remains on the glass surface it can be cleaned with any quality commercial glass cleaning liquid or citrus-based adhesive remover / cleaner.

The perforated film can be removed by using a thin scraper device. It is best to start in one corner and lift up a small section. After this is done, you can normally use hand force to pull the image from the glass. As with any decal or sticker, the warmer the outside temperature, the easier the removal will be. If any adhesive residue remains on the glass surface it can be cleaned with any quality commercial glass cleaning liquid or citrus-based adhesive remover / cleaner.

The End Please Visit: VantagePointConcepts.com

Please Visit:

VantagePointConcepts.com

Add a comment

Related presentations

Related pages

dict.cc Wörterbuch :: application :: Deutsch-Englisch ...

Englisch-Deutsch-Übersetzung für application im Online-Wörterbuch dict.cc (Deutschwörterbuch).
Read more

Anwendungssoftware – Wikipedia

Mit Anwendungssoftware (auch Anwendungsprogramm, kurz Anwendung oder Applikation; englisch application software, kurz App) werden Computerprogramme ...
Read more

dict.cc | Application | Wörterbuch Englisch-Deutsch

Übersetzung für Application im Englisch-Deutsch-Wörterbuch dict.cc.
Read more

Application | Define Application at Dictionary.com

Application definition, the act of putting to a special use or purpose: the application of common sense to a problem. See more.
Read more

application : Englisch » Deutsch | PONS

Übersetzungen für application im Englisch » Deutsch-Wörterbuch von PONS Online:application for, application for bankruptcy, application for membership ...
Read more

Application - definition of application by The Free Dictionary

Louise won the disfavor of the two Hardy girls, Mary and Harriet, by her application to her studies in school.
Read more

Application software - Wikipedia

An application program (app or application for short) is a computer program designed to perform a group of coordinated functions, tasks, or activities for ...
Read more

Application | Definition of Application by Merriam-Webster

Our loan application has been approved. Anyone interested in running for office must file an application by August 1st. If you'd like to be considered for ...
Read more

Job Application Form Sample - thebalance.com

Sample job application form to use as a guide when applying for employment. This example includes the typical information many employers request.
Read more

Application

Application. Login at the application portal ; Complete the sections education, training, motivation letter etc. All mandatory fields are marked.
Read more