1404 ride on sweepers

48 %
52 %
Information about 1404 ride on sweepers

Published on March 9, 2014

Author: northamericanserviceandsupply

Source: slideshare.net


Powerpoint presentation for the IPC Eagle TK1404 Genius Rider Vacuum Sweepers. Available at www.northamericanserviceandsupply.com for the industry's lowest price - guaranteed.

PDF Content © IPCEagle

1404 Ride-on sweepers E Sweeping widths: with 2 side brushes with 1 side brush with main brush only Waste hopper volume Filter surface Maximum climbing grade Maximum speed Power supply Empty weight Length Width Hieght mm. mm. mm. l. sqm % km/h kg mm. mm. mm. DP-P DP-D 1460 1130 800 150 6 20 7 24 V 1460 1130 800 150 6 20 7 Petrol-24V 1460 1130 800 150 6 20 7 Diesel-24V 2,6 kW TECHNICAL DATA 4,9 kW 5 kW 465 1600 1080 1280 512 1600 1080 1280 540 1600 1080 1280 1

1404 Great productivity (1) Huge hopper capacity Over-throw sweeping concept allows to load completely the 150 litre hopper volume Large sweeping path Extensive filter surface 6 square meter filtering surface with correct dust and air passage space between each element. Extensive running time Battery version can contain 4 x 6V - 240 Ah for over 3,5h run time Dual Power version has over 7,5 hour run time (5 litre tank) in engine mode before refill is necessary. 80 cm maim brush plus two side brush for a sweeping width of 1,5 metres 2

1404 Great productivity (2) NDC (No Dirt in Curve) Automatic brush movement whilst turning d nte te Pa - Whilst curving the side brush moves inwards automatically TRADITIONAL SYSTEM - Debris uncollected whilst turning - The system avoids uncollected debris whilst turning 3

1404 High performance (1) SLS (Self Levelling System) automatic brush pressure control Main brush special “V” shape design System that adapts immediately the brush thanks to a special shock absorber.The actuator moves only in case brush adapting requirements are higher. ted en t Pa Assures debris collection to the centre of the hopper and avoids leaving dirt lines on the side of the machine The system allows the brush: - to immediately and constantly follow all types of surfaces - to self adjust brush pressure until the brush is completely worn out - No need to check brush wear as brush replacement is indicated automatically on control panel display Special moulded rubber flap with pines help dirt be collected towards the sides of the brush compartment in presence of big quantities of debris. 4

1404 High performance (2) Dust micro filtration Adjustable side brush rpm Filter with incorporated rubber gasket for maximum control of dust Dust flap for large debris collection Adjustment from 20 to 100 rpm. Assures best sweeping and dust containing results what ever the debris to collect. Easily operated by pressing lever on left hand side 5

1404 High performance (3) Pre-programmed working settings Each Program can be fully personalized in: - Main brush pressure The system works by reading the amp draw of the brushes and the pressure is adjusted by an actuator on the brush head. An IPC patent that consists in a spring between the actuator and the brush deck allows immediate brush pressure adjustment without having the actuator being powered constantly. Example: P1 P2 P3 MAX Display nr. 20 40 70 100 Amp 14-15 16-17 19-20 22 Brush mark 1 cm 1,7 cm 2 cm 2,2 cm Note: Brush mark is the contact width of the brush on the ground surface. This is the best way to measure brush pressure. - Speed (0-7Km/h) - Automatic filter shaker (on or off) The automatic filter shaking (cleaning) program can be adjusted from intervals that go from every 1 minute up to every 9 minutes working time. - Traction stop when filter is shaken (on or off) It is also possible to program the machine traction stop when the filter is automatically being cleaned. Once the filter has been cleaned the traction mode re-starts. - Automatic main brush lift in reverse gear (on or off) Avoids recycling dirt in working mode when the machine is being reversed. - Functions stop automatically if pedal released (on or off) 3 independent programs allow best settings for all types of applications. Filter shaker can be operated at any time 6

1404 Ergonomics, user friendly (1) Designed to assure minimum noise levels Easy to use control panel Low noise electrically powered vacuum fan Great manoeuvrability thanks to an optimum weight distribution Battery Batteries Side brush levers Batteries Engine starting on DP version Just choose Program 1,2 or 3 Battery version Dual Power version Easy to steer thanks to the design of the engine and battery compartments 7

1404 Ergonomics, user friendly (2) Great visibility whilst working Designed for maximum comfort Comfortable seating and ergonomic traction pedal. Operator can step on machine from both sides Battery level indicator Both side brushes are easily seen whilst working. Front part of the machine completely open to allow ease in manoeuvrability and great visibility The battery is protected as follows: 21,5V = Display indicates battery in reserve and machine can still work 20,5V = Display indicates battery to be charged. All functions stop except traction 18V = Machine stops also traction in order to protect battery 8

1404 Ergonomics, user friendly (3) Maximum distance from discharge point and operator Flashing beacon Maximum visibility and safety Automatic stop (by command release) in working mode Main brush Side brushes Vacuum Traction Effective discharge system thanks to separate controls for hopper raise and tilting 1 2 Avoids having to stop and start the machine. All functions stop and start upon traction pedal command. 9

1404 Low maintenance costs (1) Main brush replacement without tools Dust filter replacement without tools Automatic main brush lift in reverse System that avoids the main brush re-circulating dirt (dirtying the surface) in reverse gear. System can be programmed on or off. 10

1404 Low maintenance costs (2) Self cleaning filter system D NTE ATE P The vacuum system is divided in 2 separate compartments Upon the basis of the frequency programmed, one compartment at a time will momentarily stop vacuum and automatically clean one of the two filters whilst the machine continues work by utilising the other vacuum compartment The automatic filter shaking (cleaning) program can be adjusted from intervals that go from every 1 minute up to every 9 minutes working time. The filter is shaken 3 times for 5 seconds at intervals of 2 seconds. The filter can always be shaken (even if set automatically) by the operator at any time 11

1404 Low maintenance costs (3) Easy access to motor compartment Dual Power version Battery Power version Easy access to all electrical components Side and front covers can be easily removed 12

1404 Robust construction (1) Maximum protection against impact Heavy duty chassis in fully coated steel Side brushes retract against impact Non marking wheels to protect surroundings against impact Maximum protection against impact all around the machine 13

1404 Robust construction (2) Panel control switches protected against water and humidity Main brush motor fully protected against dust Resin protect control card Display indicates when engine oil must be changed ENGINE OIL Card filled with resin to prevent vibrations, dust or humidity to get to electronic components Hour counter gives engine run time plus total (engine plus battery) run time. 14

Add a comment

Related presentations

Brands are more invested today than ever before on curating and distributing paid,...

Marketers need to be creating and publishing original content across many differen...

As content marketing continues to increase in popularity in every industry, more m...

Il Direct Email Marketing (DEM) è una tipologia di marketing diretto che usa la po...

This presentation contains all 120 rules from Part 1 of the 2nd edition of "Email ...

Olá, somos o Paulo Bernardes e o Pedro Silvestre, temos uma ambição em comum de me...

Related pages

IPC Gansow 1404 Ride On Sweeper

The IPC Gansow 1404 ride on sweeper is one of the larger rear loading models in the range. With a large 150 litre waste container with an automatic rear ...
Read more

Edge 1404 Dual Power Ride-On Sweeper. | Cleaning Machine Sales

Edge 1404 Ride-On Dual Power Vacuum Sweeper. PRICE: £5950.00 + VAT. Productivity 7000 m2/h. Indoors – 24 volt battery power. Outdoors – Honda petrol power
Read more

Leaflet ride-on sweeper 1404 - IPC Gansow - PDF Catalogue ...

Consult IPC Gansow's Leaflet ride-on sweeper 1404 brochure on DirectIndustry. Page: 1/2
Read more

1404 Vacuum Sweeper | IPCEagle - IPC Eagle | Cleaning ...

1404 Sweeper great for sweeping the U.S. Coast Guards Docks! 1404 Vacuum Sweeper takes on the toughest of jobs with ease. 1404 Vacuum Sweeper.
Read more

IPC 1404 - Ride On - IPC floor sweepers, cleaning ...

sorma markets the IPC & Stolzenberg range of professional sweeping machines. IPC specialises in the floor care sector, producing motorised sweepers for ...
Read more

Ride-On Sweepers | Edge Sweep 1404 | Industrial Floor Sweepers

Ride-on Sweeper; Self Levelling System; Great visibility in use; Pre-programmed, customisable; Easy to Use control panel; Dust Micro Filtration; Separate ...
Read more

IPC Gansow 1404 Industrial Sweeper - YouTube

IPC Gansow 1404 spazzatrice industriale uomo a bordo IPC Gansow 1404 Ride-On Industrial Sweeper
Read more

Genius 1404 Rider Sweeper (Battery) - JaniLink

If you experience any technical difficulty, please call 770-216-9977 for immediate service. Genius 1404 Rider Sweeper (Battery).
Read more

Ride-on sweeper / battery-powered - BLUE 1404 - FAIP

Discover all the information about the product Ride-on sweeper / battery-powered BLUE 1404 - FAIP and find where you can buy it. Contact the manufacturer ...
Read more

Ride-on sweepers, Sit-on sweepers - All industrial ...

Find all the manufacturers of ride-on sweepers and contact ... R850 is the biggest ride on sweeper with ... ride-on sweeper / battery-powered BLUE 1404.
Read more