1202 ride on sweeper

53 %
47 %
Information about 1202 ride on sweeper

Published on March 9, 2014

Author: northamericanserviceandsupply

Source: slideshare.net


Powerpoint presentation for the IPC Eagle TK1202E Genius Vacuum Sweeper. Available at www.northamericanserviceandsupply.com for the industry's lowest price - guaranteed.

PDF Content © IPCEagle

1202 Ride-on sweeper 1202 E Sweeping widths: with 2 side brushes with 1 side brush with main brush only Waste hopper volume Filter surface Maximum climbing grade Maximum speed Power supply Empty weight Length Width Hieght mm. mm. mm. l. sqm % km/h kg mm. mm. mm. 1202 DP 1220 985 750 115 4 20 7 24 V 1220 985 750 115 4 20 7 Petrol-24V 1,5 kW TECHNICAL DATA 3,7 kW 244 1550 926 1175 284 1550 926 1175 1

1202 Great productivity (1) Huge hopper capacity Over-throw sweeping concept allows to load completely the 115 litre hopper volume Large sweeping path Extensive filter surface 4 square meter filtering surface with correct dust and air passage space between each element. Extensive running time Battery version can contain 4 x 6V - 240 Ah for 4h run time Dual Power version has over 3 hour run time (3 litre tank) in engine mode before refill is necessary. 75 cm maim brush plus two side brush for a sweeping width of 1,2 metres Can contain 2 x 12V – 75Ah batteries for a battery run time of nearly 1 hours. 2

1202 Great productivity (2) NDC (No Dirt in Curve) Automatic brush movement whilst turning d nte te Pa - Whilst curving the side brush moves inwards automatically TRADITIONAL SYSTEM - Debris uncollected whilst turning - The system avoids uncollected debris whilst turning 3

1202 High performance (1) SLS (Self Levelling System) automatic brush pressure control Main brush special “V” shape design System that adapts immediately the brush thanks to a special shock absorber.The actuator moves only in case brush adapting requirements are higher. ted en t Pa Assures debris collection to the centre of the hopper and avoids leaving dirt lines on the side of the machine The system allows the brush: - to immediately and constantly follow all types of surfaces - to self adjust brush pressure until the brush is completely worn out - No need to check brush wear as brush replacement is indicated automatically on control panel display Special moulded rubber flap with pines help dirt be collected towards the sides of the brush compartment in presence of big quantities of debris. 4

1202 High performance (2) Dust micro filtration Adjustable side brush rpm Filter with incorporated rubber gasket for maximum control of dust Dust flap for large debris collection Adjustment from 20 to 100 rpm. Assures best sweeping and dust containing results what ever the debris to collect. Easily operated by pressing lever on left hand side 5

1202 High performance (3) Pre-programmed working settings Each Program can be fully personalized in: - Main brush pressure The system works by reading the amp draw of the brushes and the pressure is adjusted by an actuator on the brush head. An IPC patent that consists in a spring between the actuator and the brush deck allows immediate brush pressure adjustment without having the actuator being powered constantly. Example: P1 P2 P3 MAX Display nr. 20 40 70 100 Amp 14-15 16-17 19-20 22 Brush mark 1 cm 1,7 cm 2 cm 2,2 cm Note: Brush mark is the contact width of the brush on the ground surface. This is the best way to measure brush pressure. - Speed (0-7Km/h) - Automatic filter shaker (on or off) The automatic filter shaking (cleaning) program can be adjusted from intervals that go from every 1 minute up to every 9 minutes working time. - Traction stop when filter is shaken (on or off) It is also possible to program the machine traction stop when the filter is automatically being cleaned. Once the filter has been cleaned the traction mode re-starts. - Automatic main brush lift in reverse gear (on or off) Avoids recycling dirt in working mode when the machine is being reversed. - Functions stop automatically if pedal released (on or off) 3 independent programs allow best settings for all types of applications. Filter shaker can be operated at any time 6

1202 Ergonomics, user friendly (1) Designed to assure minimum noise levels Easy to use control panel Low noise electrically powered vacuum fan Great manoeuvrability thanks to an optimum weight distribution Battery Battery Engine Side brush levers Engine Engine starting on DP version Just choose Program 1,2 or 3 Battery version Dual Power version Easy to steer thanks to the design of the engine and battery compartments 7

1202 Ergonomics, user friendly (2) Great visibility whilst working Designed for maximum comfort Comfortable seating and ergonomic traction pedal. Operator can step on machine from both sides Battery level indicator Both side brushes are easily seen whilst working. Front part of the machine completely open to allow ease in manoeuvrability and great visibility The battery is protected as follows: 21,5V = Display indicates battery in reserve and machine can still work 20,5V = Display indicates battery to be charged. All functions stop except traction 18V = Machine stops also traction in order to protect battery 8

1202 Ergonomics, user friendly (3) Flashing beacon Effective discharge system thanks to separate controls for hopper raise and tilting Maximum visibility and safety Automatic stop (by command release) in working mode 1 Main brush Side brushes Vacuum Traction Hand assisted raising system by the means of two gas pistons. Maximum dump height of 1 meter. 2 Hand assisted hopper tilting system Avoids having to stop and start the machine. All functions stop and start upon traction pedal command. 9

1202 Low maintenance costs (1) Main brush replacement without tools Self cleaning filter system The automatic filter shaking (cleaning) program can be adjusted from intervals that go from every 1 minute up to every 9 minutes working time. Dust filter replacement without tools The filter is shaken 3 times for 5 seconds at intervals of 2 seconds. The filter can always be shaken (even if set automatically) by the operator at any time Automatic main brush lift in reverse System that avoids the main brush re-circulating dirt (dirtying the surface) in reverse gear. System can be programmed on or off. 10

1202 Low maintenance costs (2) Easy access to motor compartment Dual Power version Battery Power version Easy access to all electrical components Side and front covers can be easily removed 11

1202 Robust construction (1) Maximum protection against impact Heavy duty chassis in fully coated steel Side brushes retract against impact Non marking wheels to protect surroundings against impact Maximum protection against impact all around the machine 12

1202 Robust construction (2) Panel control switches protected against water and humidity Main brush motor fully protected against dust Resin protect control card Display indicates when engine oil must be changed ENGINE OIL Card filled with resin to prevent vibrations, dust or humidity to get to electronic components Hour counter gives engine run time plus total (engine plus battery) run time. 13

Add a comment

Related presentations

Brands are more invested today than ever before on curating and distributing paid,...

Marketers need to be creating and publishing original content across many differen...

As content marketing continues to increase in popularity in every industry, more m...

Il Direct Email Marketing (DEM) è una tipologia di marketing diretto che usa la po...

This presentation contains all 120 rules from Part 1 of the 2nd edition of "Email ...

Olá, somos o Paulo Bernardes e o Pedro Silvestre, temos uma ambição em comum de me...

Related pages

IPC Gansow 1202 DP Ride-On Sweeper - Trade In

The IPC Gansow 1202 ride on sweeper has all the features of the larger models in the range including fine dust collection with the on-board vacuum unit.
Read more

IPC Gansow 1202 Ride On Sweeper - hughcrane.co.uk

IPC Gansow 1202 Ride On Sweeper, ipc gansow, 1202 ride on sweeper, ride on sweeper, ride on sweeper, road sweeper, car park sweeper, path sweeper ...
Read more

Floor sweeper Gansow 1202 - Verhagen Leiden - Cleaning ...

The GANSOW 1202 ride-on floor sweeper includes an automatic filter-cleaning system during sweeping, three sweep settings for light, medium and heavy dirt ...
Read more

1202E RIDE ON SWEEPER PARTS MANUAL - Industrial Cleaning ...

1202E RIDE ON SWEEPER PARTS MANUAL Clemas & Co. Unit 5 Ashchurch Business Centre, Alexandra Way, Tewkesbury, Gloucestershire, GL20 8NB. Tel: 01684 850777 ...
Read more

Sweepers 1202 - Mid Atlantic Industrial Equipment

1202 Sweepers High Performance SLS (Self Levelling System) automatic main brush pressure control Dust micro filtration Dust flap for large debris collection
Read more

Genius 1202 48" Rider Sweeper (Battery 7 Hour Run-Time).

Genius 1202 48" Rider Sweeper (Battery 7 Hour Run-Time). Recommended Cleaning Businesses. Franchise Opportunities
Read more

1202E Battery Powered Sweeper - Vaclensa PLC

The 1202E is a battery powered ride-on sweeper with traction designed to effectively remove dust dirt and debris. Buy from Vaclensa PLC
Read more

Ipc Eagle Genius 48 Rider Sweeper Battery -TK1202E ...

IPC Eagle Genius 48 Rider Sweeper Battery -TK1202E, TK1202E-C, Sweepers, ... The Genius 1202 is a compact and maneuverable ride-on sweeper with
Read more

Ride-On Sweepers - Janitorial Supplies & Equipment at JaniLink

Ride-On Sweepers - Janitorial Supplies & Equipment at JaniLink. ... Genius 1202 Gas Powered Rider 48" List price : $23,262.04 Our Price : $12,307.96
Read more

IPC Sweepers - Central Cleaning

IPC Sweepers. VICTORIA HEAD OFFICE 49 Laurens St, West Melbourne VIC 3003 ... 1202. Ride on Sweeper. More info... 1404. Ride on Sweeper. More info...
Read more